• 열처리공학회지
• /
• 제35권5호
• /
• pp.239-245
• /
• 2022

The purpose of this study is to evaluate the degree of microstructural change of materials using ultrasonic nonlinear parameters. For microstructure change, isothermal heat-treated ferritic 2.25Cr steel and low-cycle fatigue-damage copper alloy were prepared. The variation in ultrasonic nonlinearity was analyzed and evaluated through changes in hardness, ductile-brittle transition temperature, electron microscopy, and X-ray diffraction tests. Ultrasonic nonlinearity of 2.25Cr steel increased rapidly during the first 1,000 hours of deterioration and then gradually increased thereafter. The variation in non-linear parameters was shown to be coarsening of carbides and an increase in the volume fraction of stable M6C carbides during heat treatment. Due to the low-cycle fatigue deformation of oxygen-free copper, the dislocation that causes lattice deformation developed in the material, distorting the propagating ultrasonic waves, and causing an increase in the ultrasonic nonlinear parameters.

• 지질공학
• /
• 제3권3호
• /
• pp.267-278
• /
• 1993

지하수의 온도측정자료는 자연상태 및 인공적인 충진(Recharge)에 의한 지하수의 유동상태 및 대수층의 특성을 파악할 수 있는 중요한 parameter가 된다. 대수층내 지하수의 온도는 지하수를 저류하고 있는 대수층의 구성암석들의 온도를 반영하며, 지하수의 유동성과 저온능력은 지각내부에서 발달된 지열을 대수층내 분산시키는 역할을 한다. 조사지역내(25개 시추공)에서 측정된 지하수온도자료들은 대수층내 온도분포의 근원적인 수리지질학적 의미와 수리역학적 문제점 해결에 유용하게 이용되며, 또한 지표변으로부터 열원이 전달되는 전파율과 심부 증온율 연구에 기여된다.

• 에너지공학
• /
• 제12권1호
• /
• pp.29-34
• /
• 2003

압력파의 일종인 열음향파는 압축성유체를 급속히 가열 또는 냉각하는 경계면 근처에서 유체가 순간적으로 압축 및 팽창하는 경우에 발생하는 현상으로 자연대류가 일어나지 않는 우주공간에서는 매우 중요한 열전달 메커니즘이다. 본 연구에서는 공기로 채워진 공간에서 급속한 가열에 의하여 발생한 열음향파의 전달특성을 수치적인 방법에 의하여 평가하고자 유한체적법을 기반으로 비정상 지배방정식을 이산화하였으며, PISO알고리즘과 2계 상향기법을 적용하여 해석을 수행하였다. 안정적인 수치해는 50 $\times$ 800 개의 셀과 1 $\times$ $10^{-9}$ 시간간격을 적용하여 얻을 수 있었으며, 생성된 열음향파는 유체 속을 통과하면서 점성과 열소산에 의하여 점점 감쇠하여 가는 경향을 보였다. 생성된 압력파는 날카로운 전단과 점점 감소하여 길게 늘어지는 후단부를 갖는 형상을 보였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.83-91
• /
• 2000

A numerical study was carried out to investigate the 'unstart' process of thermally-choked combustion in model scramjet engines. The combustion mechanism of supersonic combustor will be compared with the experimental results obtained from the T3 free-piston shock tunnel at ANU (Australian National University) and the high enthalpy supersonic wind tunnel at UT (University of Tokyo). For the numerical simulation of supersonic combustion. multi-species Navier-Stokes equations were considered. and detailed chemistry reaction mechanism of $H_2$-Air were adopted. The governing equations were solved by Roe's FDS method and LU-SGS method with MUSCL scheme. In this study. it is found that the thermal choking process could result from excessive heat release due to combustion. In detail, sufficient heat release could be generated at local region of very high temperature increased by reflection of shock waves or vortex sheets. Accordingly the flow of downstream of the combustor fell to subsonic field propagated upstream along the combustor. Sometimes the subsonic flow field propagated into isolator could generate precombustion shock waves in the isolator.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.23-30
• /
• 2002

Instability of oblique detonation waves (ODW) at off-attaching condition was investigated through a series of numerical simulations. Two-dimensional wedge of finite length was considered in $H_2/O_2/N_2$ mixtures at superdetonative condition. Numerical simulation was carried out with a compressible fluid dynamics code and a detailed hydrogen-oxygen combustion mechanism. Present result reveals that there is a chemical kinetic limit of the ODW detachment, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. Result also presents that ODW still attaches at a wedge as an oblique shock-induced flame showing periodically unstable motion, if the Rankine-Hugoniot limit of detachment is satisfied but the chemical kinetic limit is not. Mechanism of the periodic instability is considered as interactions of shock and reaction waves coupled with chemical kinetic effects. From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of the Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.

• 한국환경과학회지
• /
• 제26권12호
• /
• pp.1363-1374
• /
• 2017

Global climate change caused by industrialization has caused abnormal weather conditions such as urban temperatures and tropical nights, urban heat waves, heat waves, and heavy rains. Therefore, the study tried to analyze climate conditions and weather conditions in the streets and analyze climate factors and meteorological factors that lead to inconvenience to citizens. In the case of trees, the overall temperature, surface temperature, solar irradiance, and net radiation were measured low, and the temperature was lower in the Pedestrian road than in roads. The dry bulb temperature, the black bulb temperature, and the wet bulb temperature for the thermal evaluation showed the same tendency. In the case of thermal evaluation, there was a similar tendency to temperature in WBGT, MRT, and UTCI, and varied differences between types. Although the correlation between the meteorological environment and the thermal environment showed a statistically significant significance, the difference between the measured items was not significant. The study found that the trees were generally pleasant to weather and thermal climate in the form of trees, and the differences were mostly documented.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.127-132
• /
• 2003

In a today industry, the welding is doing a many portion in structure manufacture. This study is simulated heat of heat-effected zone and researched a mechanical properties and ultrasonic characteristic in used the SS400 and the STS304. As the result mechanical properties of steel that become drawing decreased because of remaining stress by strain gardening according as simulated heat temperature rises, but according as temperature rises in material that do simulated heat after have done annealing, mechanical propensity was improved. The velocity and attenuation become different by effect of remaining stress than effect of material internal microstructure in ultrasonic wave test. In the case of STS304, there was change in mechanical properties by effect that is by strain hardening, but there was no change in material that simulated heat after annealing. When become drawing in ultrasonic waves test, according as simulated heat temperatures rise, change of attenuation coefficient is looked, but material that simulated heat after annealing was no change almost both the volocity and attenuation.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1929-1941
• /
• 2014

Now a days, frequency of abnormally high temperatures like heat wave by global warming and climate change is increasing constantly and the number of patient with heat related illness are jumping rapidly. In this study, we chose the case day for the heat wave in Busan area(Busan and Yangsan), 2013 which it was the most hottest year during 21th century. And then, we analysed the weather condition using automatic synoptic observing system(ASOS) data. Also, four indices, heat index(HI), wet bulb globe temperature(WBGT), Man-ENvironment heat EXchange model(MENEX)'s results like Physiological subjective temperature(PST), Physiological strain(PhS), were calculated to evaluate the thermal comfort and stress quantitatively. However, thermal comfort was different as the each station and thermal comfort index during same time. Busan's thermal indices (HI: hot, WBGT: sweltering, PST: very hot, PhS: very hot) indicated relatively higher than Yansan's (HI: very hot, WBGT: sweltering, PST: very hot, PhS: sweltering). It shows that Busan near coast is relatively more comfortable than Yangsan located in inland.

• 비파괴검사학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2000

본 연구에서는 유도초음파를 이용하여 열 교환기와 증기발생기 튜브의 결함을 비파괴적으로 탐상하고 그 크기를 산정하였다. 이론적인 해석을 위해 인코넬 (Inconel) 튜브에 대한 위상 및 군속도 분산선도를 Longitudinal 모드와 Flexural 모드에 대해 구하였다. 튜브의 원주방향 레이저노치와 튜브 지지대 하단의 방전가공결함(EDM wear)을 각각 비대칭 및 대칭 탐촉자 세트를 사용하여 탐상하였다. 실험결과 방전가공결함은 L(0, 2), L(0, 3), L(0, 4) 모드로 탐상되었으며, 그 중 L(0, 4) 모드가 결함으로부터 가장 잘 반사되었다. 레이저노치의 경우에는 L(0, 1) 모드 주변의 Flexural 모드가 결함을 탐상하고 크기를 산정하는데 사용될 수 있음을 보였다.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.695-700
• /
• 2010

가스터빈 날개를 덮고 있는 덮개판(Lock plate)의 재료 물성을 유도초음파를 이용하여 측정을 하였다. Lock plate는 가스터빈 발전소에서 아무 극한 환경에서 작동을 하는 부분 중 하나이다. 초음파 속도와 감쇠계수가 서로 다른 3가지 조건의 열처리상태의 재료 물성을 측정하는데 사용되었다. 일반적인 기계적 파괴 인장실험과 비교했을 때, 인코넬 x-750의 재료특성은 다른 열처리 조건에서 탄성계수와 포아슨비를 활용하여 비파괴적인 방법으로 더 효과적으로 알아냈다. 초음파 속도와 인코넬 x-750의 강도는 서로 비례관계에 있으며, 이러한 재료물성 측정은 여러 산업 분야에서 손상 측정에 활용될 수 있다. 또한 유도초음파 기법을 활용하여 장거리, 광범위한 진단으로 시간과 비용을 절감하는데 도움이 되리라 기대된다.