• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.118.1-118.1
• /
• 2016

The laser surface modification has been reported for its functional applications for improving tribological performance, wear resistance, hardness, and corrosion property. In most of these applications, continuous wave lasers and pulsed lasers were used for surface melting, cladding, alloying. Since flexibility in processing, refinement of microstructure and controlling the surface properties, technology utilizing lasers has been used in a number of fields. Especially, femtosecond laser has great benefits compared with other lasers because its pulsed width is much shorter than characteristic time of thermal diffusion, which leads to diminish heat affected zone. Moreover, laser surface engineering has been highlighted as an effective tool for micro/nano structuring of materials in the bio application field. In this study, we applied femtosecond and nanosecond pulsed laser to treat biometals, such as Mg, Mg alloy, and NiTi alloy, by heating to improve corrosion properties and functionalize their surface controlling cell response as implantable biomedical devices.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.375-380
• /
• 2007

The bimetals of home appliances are mainly manufactured by cladding process and these are almost consisted with Cu alloy and Ni alloy. But it is very difficult to clad these alloys, because the brittle $Cu_3O_4$ oxide film formed easily on Cu alloy surface during cladding process. Clad rolling and heat treatment processes were applied for the development of bimetals by using the Ni alloy and the 3 types of Cu alloys. Optical microstructure, micro-hardness, specific resistance, and deflection and line profile of newly processed bimetals specimens were observed and measured in this paper. Inter-diffusion was observed between Cu and Ni element in the interface of heat treated Cu alloy and Ni alloy clad material. The C1220 and Invar36 clad material showed the best property of deflection among the 3 kind of clad materials.

• 소성∙가공
• /
• 제8권3호
• /
• pp.245-251
• /
• 1999

In this study, the experimental considerations of the friction factors are presented in a few cases. The friction factors in the cases of, first, the drawing quality material, SPC3C through the non-coated die of base material. GC30, secondly, SPCC through the Cr-coated GC30 die, and lastly. SPCC through the TD heat treated STD11 die, are measured experimentally both for the increasing die temperature and the blank holding forces. The results show no considerable variations of the value of friction coefficients according to the change of both the die temperature and the die treating conditions.

• 한국분말재료학회지
• /
• 제3권1호
• /
• pp.13-24
• /
• 1996

Two grades of Permalloy strips, Fe-45Ni(PB) and Fe-78Ni-4Mo-5Cu(PC) were fabricated by powder rolling process from elemental powder mixtures. The roll compacted green strips were sintered, homogenized, cold rolled with or without an intermediate annealing and finally heat treated to measure magnetic properties. For a given thickness reduction, rolling with an intermediate annealing was found more effective to achieve a full densification with no visible micropores and also to obtain better magnetic properties. Increasing the final rolling reduction also produced a marked improvement of the magnetic properties whereas the cooling rate during the final heat treatment has little effect in both grades. Addition of a small amount, 0.4% Mn slightly degraded the properties. As an overall, The PM strips produced via powder rolling yielded the similar soft magnetic properties to the corresponding commercial grades produced via wrought processing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.65-68
• /
• 1999

A well oriented Bi2212 superconductor thick films were fabricated by screen printing with a Cu-free Bi-Sr-Ca-O mixture powder on a copper plate and heat-treating at 820-88$0^{\circ}C$ for several minute in air. During the heat-treatment, the printing layer partially melted by reaction between the Cu-free precursor and CuO of the oxidizing copper plate. In the partial melting state, it is believed that the solid phase is Bi-free phase and Cu-rich phase and the composition of the liquid is around Bi : Sr : Ca : Cu = 2 : 2 : 0 : 1. Following the partial melting, the Bi2212 superconducting phase is formed at Bi-free phase/liquid interface by nucleation and grows. With decreasing the Bi composition in the precursor powder, the critical temperature(T$_{c}$) of the fabricated Bi2212 thick film increased to about 79 K.K.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.59-62
• /
• 2003

This study investigated the phase transformation of the $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, By) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. According to result of fabricated single crystal of RE-123 superconductor through TSMG method based on phase transformation neted among heat treatment process, when the ionic radius elements was decreased, RE-211 phase was well-distributed. According to result that examine about seed of pretreatment effect of TSMG method, magnetic hysteresis improved when preprocess among oxygen atmosphere in same seed. and used after. Effect of miscut expressed good superconducting special quality in case miscut uses big seed.

• 한국조경학회지
• /
• 제40권6호
• /
• pp.180-189
• /
• 2012

이 연구는 저관리 경량형 옥상녹화시스템을 위한 내서성 식물 선발을 목적으로 6종 세덤식물을 대상으로 처리 시간과 온도에 따라 전해질 용출, 엽록소 함량 변화 및 재생 실험을 실시하였으며, 토양수분과 고온스트레스와의 관계를 연구하였다. Logistic비선형 회귀분석을 이용하여 6시간의 고온 처리 후 5%의 토양 함수량의 치사 온도는 $45.1{\sim}48.0^{\circ}C$, 토양 함수량 10%, 15%의 경우 각각 $47.5{\sim}49.3^{\circ}C$, $48.6{\sim}52.8^{\circ}C$의 범위로 측정되었다. 고온스트레스는 처리 시 토양 수분이 높을수록 세덤류의 내서성이 높아졌다. 엽록소 함량은 처리 온도가 높을수록 함량이 낮아졌고, 토양 수분 함량이 낮을수록 분해 속도가 높아졌다. 토양 함수량 5% 시 고온에 대한 저항성은 S. reflexum>S. takevimense>S. middendorffianum>S. album>S. sieboldii>S. spurium의 순으로 나타났으며, 토양 함수량이 15%의 경우는S. album>S. reflexum>S. spurium>S. takevimense>S. middendorffianum>S. sieboldii의 순으로 나타났다. 토양의 수분 함량이 높을수록 S. album, S. reflexum, S. spurium의 내서성이 높아졌다. 이러한 결과는 재생 검사의 결과와 전해질 용출 평가에 일관성이 있는 것으로 증명되었다.

• 한국분말재료학회지
• /
• 제23권5호
• /
• pp.353-357
• /
• 2016

In this study, $TiO_2$ powders are synthesized from ammonium hexafluoride titanate (AHFT, $(NH_4)_2TiF_6$) as a precursor by heat treatment. First, we evaluate the physical properties of AHFT using X-ray diffraction (XRD), particle size analysis (PSA), thermogravimetric analysis (TGA), and field-emission scanning electron microscopy (FE-SEM). Then, to prepare the $TiO_2$ powders, is heat-treated at $300-1300^{\circ}C$ for 1 h. The ratio of anatase to rutile phase in $TiO_2$ is estimated by XRD. The anatase phase forms at $500^{\circ}C$ and phase transformation to the rutile phase occurs at $1200^{\circ}C$. Increase in the particle size is observed upon increasing the reaction temperature, and the phase ratio of the rutile phase is determined from a comparison with the calculated XRD data. Thus, we show that anatase and rutile $TiO_2$ powders could be synthesized using AHFT as a raw material, and the obtained data are utilized for developing a new process for producing high-quality $TiO_2$ powder.

• 한국식품과학회지
• /
• 제24권5호
• /
• pp.463-469
• /
• 1992

열공정이 생선단백질의 조직 형성에 미치는 영향을 단백질 sol의 열안정성과 가열시의 rigidity 형성 및 최종 겔의 구조적인 측면으로 살펴보았다. 가열하는 동안에 나타나는 변성 피크는 소금첨가에 따라서, 가열속도에 따라서 또한 낮은 온도에서의 전처리에 따라 변성온도가 사라지거나 낮은 쪽으로 이동하였고 단백질의 열용량도 줄어들고 불안정한 상태로 변하였다. $4^{\circ}C$에서의 전처리는 가열시 조직의 굳기형성에 지속적인 상승효과를 가져왔고 많은 탄성력의 증가를 가져왔으나, $40^{\circ}C$에서의 전처리는 일시적으로 조직강도의 증가만 가져왔다. 그러나 낮은 온도($4^{\circ}C$ 나 $40^{\circ}C$)에서의 전처리 후 생성되는 겔 내부조직은 큰 집성물이 보이는 구조적 유사성을 보였으며, SH기를 변형시킨 겔의 구조도 조직의 강도변화를 나타내는 특징을 나타내었다.

• 열처리공학회지
• /
• 제33권3호
• /
• pp.99-106
• /
• 2020

Selective laser melting (SLM) is an additive manufacturing process by melting metallic powders and stacking into layers, and can product complex shapes or near-net-shape (NNS) that are difficult to product by conventional processes. Also, SLM process is able to raise the efficiency of production by creating a streamlined manufacturing process. For manufacturing in SLM process using Ti-6Al-4V powder, analysis of microstructural evolution and evaluation of mechanical properties are essential because of rapid melting and solidification process of powders according to high laser power and rapid scan speed. In addition, it requires a post-processing because the soundness and mechanical properties are degraded by defects such as pore, un-melted powder, lack-of-fusion, etc. In this study, hot isostatic press (HIP) was conducted as a post-processing on SLM-printed Ti-6Al-4V alloy. Microstructure of post-processed Ti-6Al-4V alloy was compared to as-built Ti-6Al-4V, and the evolution of quasi-static (Vickers hardness, room temperature tensile characteristic) and dynamic (high-cycle fatigue characteristic) mechanical properties were analyzed.