• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.250-260
• /
• 2015

Purpose: Dual cylindrical microwave chambers equipped with an ohmic heating tube were designed and fabricated to maximize the electric field strength for expeditious heat treatment of particulate foods. Methods: The efficacy of the combination heater was investigated by simulating the electric field distribution by using COMSOL Multiphysics software. Results: All components of the designed microwave heating unit were suitable for transmitting maximal microwave power to the load. The simulated electric field distribution implied that single-mode microwave heating would be sufficient for the steady generation of a highly localized heating zone in the cavity. During impedance matching, the calculated reflection coefficient ($S_{11}$) was small, possibly implying minimal power loss and wave reflection in the designed microwave heating chamber. Conclusions: This study demonstrates the possibility of concentrating the microwave power at the centerline for a single-frequency microwave, for thermal treatment of multiphase foods without attenuating the microwave power.

• Journal of Korea Foundry Society
• /
• v.19 no.1
• /
• pp.24-32
• /
• 1999

A series of investigations for Austempered Ductile Iron (ADI) castings were carried out by using the specimens with various chemical compositions and heat treatment conditions. The rolling wear characteristics of alloyed austempered ductile irons under an unlubricated dry rolling condition was evaluated by the Amsler type test with 9.09% sliding ratio. Generally, the wear amount was increased with the austempering temperature and decreased when the hardness of the matrix was higher. The alloying elements also influenced the austempering reaction, the microstructure and the mechanical properties. In this study, the mechanical properties (i.e.) ultimate tensile strength (UTS), hardness, elongation) and the wear resistance are analysed to show the relationship between the alloying elements and the austempering temperatures. Mo, Cu and Ni are alloyed individually or in combination. It has been found that when Cu and Ni alloyed individually to a casting, the wear amount is increased than others with elements alloyed in combination. The amount of rolling wear loss was decreased when Mo was alloyed in cast iron, individually or in combination.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.60-67
• /
• 2005

Compared with conventional welding, laser spot welding offers a unique combination of high speed, precision and low heat distortion. This combination of advantages is attractive for manufacturing industries including automotive and electronics companies. In this paper, a real time monitoring scheme fur a pulsed Nd:YAG laser spot welding was suggested. Acoustic emission (AE) signals were collected during welding and analyzed for given process conditions such as laser power and pulse duration. A back propagation artificial neural network, with AE frequency content inputs, was used to predict the weldability of stainless steel sheets.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.65-70
• /
• 2010

Large oro-facial defects result from cancer treatment consequences in serious functional as well as cosmetic deformities. Acceptable cosmetic results usually can be obtained with a facial prosthesis. However, retention of a large facial prosthesis can be challenging because of its size and weight. This article describes prosthetic rehabilitation of a 57-year-old man having a right lateral mid-facial defect with intraoral-extraoral combination prosthesis. A modified technique to fabricate a hollow substructure in heat-polymerizing polymethyl-methacrylate to support silicone facial prosthesis was illustrated. The resultant facial prosthesis was structurally durable and light in weight facilitating the retention with magnets satisfactorily. This technique is advantageous as there is no need to fabricate the whole prosthesis again in case of damage of the silicone layer because the outer silicone layer can be removed and re-packed on the substructure if the gypsum-mold is preserved.

• Journal of Korean Medical classics
• /
• v.20 no.3
• /
• pp.23-32
• /
• 2007

For the purpose of understanding the feature of earlier prescriptions before Jeonhan-era(前漢時期), we invastigated "Osibi-byeongbang Jeobyeong(五十二病方 疽病)" and come to the follwing conclusions. 1. Hwanggi and Baeglyeom were combined in many cases of prescriptions. And Warming and Heating herbs such as Gye(桂), Gang(薑), Cho(椒) are the main herbs in combination of the herbs and adjusting the portions. 2. Out of inspection of the Current prescriptions of Jeobyeong(疽病), we find that the remedies were very diverse at that time. There are the synthetic methods of expelling toxin from within the body method, elimination from within method, sweat-inducing method, replenish Eum and Heat-reducing method. 3. The principles of combinations of prescriotions in "Osibi-byeongbang Jeobyeong(五十二病方 疽病)"are simple and have obvious orientations in remedies.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.763-769
• /
• 2018

In this research, in order to improve the heat retention of greenhouse, comparative analysis of the heat flux of the marketed multi-later insulating curtain was carried out. Experiments is conducted by fabricating a test apparatus for investigating the heat flux characteristics. The multi-later insulating curtain used for the experiment was compared using the P, N, S, U and T company, which are commercially available, and the heat flux due to temperature difference between the experimental apparatus and the outside was compared and analyzed. When the internal temperature of the experimental result is the maximum temperature $60^{\circ}C$, the heat flux of multi-later insulating curtain is T Co.($73.1W/m^2$) > S Co.($119.5W/m^2$) > U Co.($155W/m^2$) > N Co.($163.1W/m^2$) > P Co.($177.7W/m^2$). The heat flux means the quantity of heat passing through the unit time per unit area, and the higher the numerical value, the higher the quantity of heat passing through the multi-layer insulating curtain. This can be determined that high heat fluxes produce low heat resistance. Further, it has been found that the weight of the insulating curtain is largely unrelated to the heat insulating property, and the heat insulating curtain having a thickness containing a high internal air layer is excellent in the heat insulating property. In the future when manufacturing a heat insulating curtain, It is judged that it is desirable to manufacture a combination of heat insulating materials that contain a high internal air layer content and that can maintain the air layer even for long-term use while minimizing the volume.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.77-81
• /
• 1997

For the early selection of heat-tolerant clones, the true potato seeds of 750 clones were obtained by several cross combinations : $CIP\;575015\;{\times}\;katahdin,\;CIP\;575015\;{\times}\;B6603-6,\;84\;I\;35-4\;{\times}\;katahdin,\;CIP\;575015\;{\times}\;NookSack,\;and\;CIP575015\;{\times}\;Superior.$ The ratios of in vitro tuberization at 3$0^{\circ}C$ were decreased by 43% in all cross combinations compared with at 2$0^{\circ}C$. In particular, tuberization rate of $CIP575015\;{\times}\;katahdin$ cross at 3$0^{\circ}C$ was only 21%. On the other hand, the rate of tuberization of $CIP575015\;{\times}B6603-6$ cross was 58 % at 3$0^{\circ}C$, so this cross combination was thought to be good heat-tolerant clone. To screen the heat-tolerant clones in lower land during high temperature period, microtubers were cultivated in Kangnung, and the characters of tubers and productivity were examined. Among screened clones, one clone at 2$0^{\circ}C$ and three clones at 3$0^{\circ}C$ were shown to be heat-tolerant. The yield of 89ML75-8 was 88% more than that of Superior, and dry weight rate of 89 ML64-11 was 18.8%. Therefore, 89ML64-11 clone was considered as a good cultivar for processing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.994-1001
• /
• 2007

Changes in shear force value, transverse sections, myofibrils and intramuscular connective tissue of bovine skeletal muscle exposed to the combination of high-pressure up to 400 MPa and heat (30 and $60^{\circ}C$) were studied. The shear force value decreased by pressure-heat treatment up to 200 MPa at 30 and $60^{\circ}C$, and then slightly increased over 200 MPa at $30^{\circ}C$. Shear force values of treated muscles were lower than those of untreated ones. Gaps between muscle fibers in the untreated muscle were a little clear, and then they became very clear in the treated muscles up to 200 MPa at 30 and $60^{\circ}C$. However, the gaps reduced significantly over 200 MPa at $30^{\circ}C$. The remarkable rupture of I-band and loss of M-line materials progressed in the myofibrils with increasing pressure applied. However, degradation and loss of the Z-line in myofibrils observed in the muscle treated at $60^{\circ}C$ was not apparent in the muscle treated at $30^{\circ}C$. The length of the sarcomere initially contracted by pressure-heat treatment of 100 MPa at $30^{\circ}C$ seemed to have recovered with increase of the pressure up to 400 MPa. In the muscle treated at $60^{\circ}C$, the length of sarcomere gradually decreased with increase of the pressure up to 400 MPa. In the treated muscles, changes in the honeycomb-like structure of endomysium were observed and accelerated with increase of the pressure. A wavy appearance clearly observed at the inside surface of endomysium in the untreated muscles gradually decreased in the treated muscles with increase of the pressure. Tearing of the membrane was observed in the muscles treated over 150 MPa at $30^{\circ}C$, as observed in the sample pressurized at 100 MPa at $60^{\circ}C$. The roughening, disruption and fraying of the membrane were observed over 200 MPa at $60^{\circ}C$. From the results obtained, the combination of high-pressure and heat treatments seems to be effective to tenderize tough meat. The shear force value may have some relationship with deformation of intramuscular connective tissue and myofibrils.

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.531-537
• /
• 2006

This study was conducted to evaluate the combined effect of heating and gamma irradiation on the shelf-stability and quality of kimchi during storage at $35^{\circ}C$. The optimum condition for heat treatment of kimchi was considered at $60^{\circ}C$ for 30 min. Irradiation after kent treatment was effective to inhibit the growth of microorganisms and prevent the quality change of kimchi during storage. In particular, microorganisms of kimchi co-treated with heat and 20 kGy-irradiation were not detected and sensory scores of that were the highest after storage at $35^{\circ}C$ for 14 days. Therefore, combination treatment of heat and irradiation was considered as the effective method to improve the shelf-stability of kimchi in the accelerated condition.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.130-143
• /
• 1997

A heat-pressed technique(IPS-Empress, Ivoclar) has been described to construct single unit crown, inlay/onlay and veneers using a partially pre-cerammed and pre-colored glass-leucite ingot that has the greateast strength by the combination of heat-pressed procedure through the smalldiameter sprue and heat treatment procedure. The purpose of this study was to evaluate the flexure strength of a heat-pressed ceramic material(IPS-Empress) without simulated firing treatments according to pontic designs. Two groups of 9 disks(1.4mm thick, 14mm in diameter) each using two types of sprues with different diameters($({\Phi}2.8\;,{\Phi}1.8)$) and numbers were prepared. The specimens were mounted in the testing jig. The flexural strengths were determined, by means of the bi-axial bending test, by loading the center of disk to failure using a universal testing machine(Zwick 145141, Zwick, Germany) at a cross-head speed of 1.0 mm/min. The means flexural strength value of one group using a sprue with ${\Phi}2.8$ was $140.4{\pm}8.0Mpa$. That of the other group using two sprues with ${\Phi}1.8$ was $151.8{\pm}10.3Mpa$. After analysis, results showed that there was a statistical difference between groups(t=2.33m p<0.05). No clnical implications were drawn from these data because of absence of simulated firing treatment.