• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.340-342
• /
• 1995

We prepared $LiCo_{1-x}Ni_{x}O_2$ by reacting stoichiometric mixture of LiOH.$H_2O$, $CoCO_3$.$xH_2O$ and $Ni(OH)_2$(mole ratio respectively) and heating at $850^{\circ}C$ for 5n. In the result of X-ray diffraction analysis, along fluctuation of the function of x in $LiCo_{1-x}Ni_{x}O_2$(003) peak and (104) peak indensities and ratio were varied. We awared through XRD that from 0 to 0.5 at x in $LiCo_{1-x}Ni_{x}O_2$ is well formed for hexagonal structure at one step heat treatment($850^{\circ}C$), but if Ni involve at $LiCo_{1-x}Ni_{x}O_2$ hexagonal structure is not well formed. In the result of charge/discharge tests charge/discharge capacity and effiency is different about various cathode. Therefore, the appropriate charge/discharge method must be selected for good characteristics.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.149-154
• /
• 2001

The emission characteristics, flame stability, the composition of the flame zone and temperature profile were studied experimentally. The compositions of oxydant were varied by substituting $N_2$ with $CO_2$ at the constant $O_2$ concentration. Results showed that flame became unstable due to the high heat capacity, low transport rate and strong radiation effect of $CO_2$ in comparison with those of $N_2$. The reaction zone was cooled, broadened, as the conversion ratio of $CO_2$ to $N_2$ was increased. Temperature has a large effect on the NOx emission. The concentration of NOx in flue gas decreased due to the decreased temperature of reaction zone. It was also shown that the reaction was delayed by the cooling effect. As the conversion ratio of $CO_2$ to $N_2$ was increased, the emission of CO and the higher temperature zone increased due to the decrease of reaction rate by the cooling effect.

• 대한기계학회논문집B
• /
• 제32권4호
• /
• pp.307-316
• /
• 2008

The objective of this study is to provide numerical and experimental data that can be used to investigate the performance characteristics of a flat plate fin-tube evaporator in household and commercial refrigerators under frosting conditions. Computer simulations with variations of operating conditions such as air inlet temperature, relative humidity, and geometries were performed to find out optimal design parameters of a fin-tube evaporator for household and commercial refrigerators. The tube-by-tube method was used in the simulation and the frost growth model was considered under frosting conditions. The developed analytical model predicted the decreasing rates of heat transfer capacity and air flow rate ratio within ${\pm}$10% compared to the experimental results for a refrigerator under real operating conditions. As a result, the frost thickness at $3^{\circ}C$ & 80% is increased 40% than that of $-3^{\circ}C$ & 80%, and the frost thickness at $3^{\circ}C$ & 90% is increased 30% than that of $3^{\circ}C$ & 60%. Accordingly, the operating time of the evaporator in the refrigerator was reduced with the increase of the decreasing rate of air flow rate ratio at each condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.517-520
• /
• 2004

Concrete Filled steel Tube pipe structure is a rational type of structure that maximizes performance by combining the strong points of steel frame and concrete. In the structure, the confining effect of steel pipes increases the bearing power of infilled concrete and the strengthening of local bucking of steel pipes by infilled concrete increases the bearing power of members. and these result in the reduction of cross-sectional area and high transformation capacity. Moreover. the structure is economically efficient and widely applicable that it is used from super-high buildings to residential, business and apartment buildings. It enables the construction of multi-story buildings with long spans using columns of small cross-sectional area. In case of diaphragm, however, it is difficult to confirm the compactness of the closed inside of steel pipes. The present study examined the properties of super-high strength concrete over 80MPa by comparing it with 40MPa concrete through heat conductivity and length change tests based on a mixture ratio satisfying the mixture goal presented in the guideline for the design and construction of concrete-filled steel pipe structure. and evaluated the performance of super-high strength concrete according to the shape and size of the aperture ratio of diaphragm.

• 자원환경지질
• /
• 제44권6호
• /
• pp.513-523
• /
• 2011

이 연구에서는 최근에 발표되고 국제기구에 의해 공인된 protocol에 따라 인공 지열 저류층 생성 기술(EGS)을 통한 우리나라 지열발전의 잠재량을 평가하였다. 잠재량 추정에 필요한 입력 자료인 암석 밀도, 비열 및 열전도도는 1,516개 암반 시료의 측정값을 이용했으며, 열생산율은 180개 자료, 지열류량은 352개 자료, 그리고 지표면 온도는 54개 자료를 사용하였다. 내륙을 34,742개의 $1'{\times}1'$ 크기 격자로 나누어 3-10 km 깊이 범위에 걸쳐 1 km 깊이 구간별로 온도 분포를 계산하고 이로부터 열에너지 부존량을 계산하였다. 지하 3-10 km 범위의 이론적 잠재량은 6,975 GW로 계산되었고 이는 2010년 우리나라 총 발전용량인 76 GW의 약 92배에 달한다. 기술적 잠재량은 3-6.5 km 깊이, 개발행위가 가능한 지역만을 고려하고 또한 암반으로부터의 열 회수율(0.14)과 발전시설의 온도 특성까지 포함해서 산출되었다. 온도하강요소 $10^{\circ}C$를 고려할 때 총 기술적 잠재량은 19.6 GW로 나타나고 있다. 만약 온도하강요소를 경제적 잠재량에 포함시킬 수 있도록 제외한다면 기술적 잠재량은 56 GW로 늘어난다.

• 공업화학
• /
• 제32권1호
• /
• pp.83-90
• /
• 2021

본 연구에서는 저온 열처리 탄소의 물리·화학적 특성이 이차전지 음극재로서의 전기화학적 거동에 미치는 영향에 대하여 고찰하였다. 석유계 핏치의 코크스화를 위하여 600 ℃ 열처리를 수행하였으며 제조된 코크스는 700~1500 ℃로 탄화 온도를 달리하여 저온 열처리 탄소 음극재로 제조되었다. 탄소 음극재의 물리 화학적 특성은 N2 흡·탈착 등온선, X-ray diffraction (XRD), 라만 분광(Raman spectroscopy), 원소 분석 등을 통하여 확인하였으며,저온 열처리 탄소의 음극 특성은 반쪽 전지를 통한 용량, 초기 쿨롱 효율(ICE, initial Coulomb efficiency), 율속, 수명 등의 전기화학적 특성을 통하여 고찰하였다. 저온 열처리 탄소의 결정 구조는 1500 ℃ 이하에서 결정자의 크기와 진밀도가 증가하였으며 비표면적은 감소하였다. 저온 열처리 탄소의 물리화학적 특성 변화에 따라 음극재의 전기화학 특성이 변화하였는데 수명 특성은 H/C 원소 비, 초기 쿨롱 효율은 비표면적, 율속 특성은 진밀도의 특성에 기인하는 것으로 판단되었다.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.603-610
• /
• 2016

본 논문에서는 석탄으로부터 생성된 합성천연가스(SNG)의 다양한 연료 조성에 대한 배기가스 배출 특성 및 희석제에 대한 NOx배출 저감에 대해 기술하였다. 예혼합거리가 짧은 부분 예혼합 가스터빈 연소기에서 SNG 연료조성에서의 수소 비율과 입열량, 당량비를 조절해 가며 연소특성을 관찰하였다. 수소 비율에 따른 NOx 배출지수는 유사하게 나타났고, 화염가시화를 통해 화염의 특성을 파악할 수 있었다. CO 배출의 경우 당량비 1 구간에서 특이점이 나타났으며, 이를 화염의 자발광 이미지와 자발광 강도를 통하여 원인을 파악할 수 있었다. 또한 높은 NOx 배출을 저감하기 위하여 질소($N_2$)와 이산화탄소($CO_2$) 희석제를 사용하여 희석제 공급량에 대한 저감 효과를 파악하였다. 이로부터 희석제의 비열과 열용량이 연소로부터 발생한 연소열을 흡수하여 열화에 의한 NOx 배출을 저감하는 효과를 확인하였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2010년도 춘계학술논문발표회 논문집
• /
• pp.371-376
• /
• 2010

The strength of steel material in a concrete filled steel tube (CFT) is reduced in fire, but the filled interior concrete structurally ensures the fire resistance due to its high thermal capacity. More, the contractibility of CFT is excellent since it can be constructed without form work. This research analyzed the interior concrete strength and deformation characteristics, which are the influence factors of the fire resistance of CFT, in proportion to the axial load ratio. The fire resistance performance according to changes of the axial load ratio showed great fluctuation. As $280{\times}280{\times}6$ CFT columns with the concrete strengths of 24 MPa and 40 MPa and the axial load ratios of 0.9, 0.6, and 0.2 in accordance with KS F 2257-1 and 7 were heated with loading to examine the fire resistance performance, the 24 MPa concrete exhibited the fire resistance time as 27, 113, and 180 minutes for the axial load ratios, 0.9, 0.6, and 0.2 respectively. In case of 40 MPa concrete, the fire resistance time were turned out to be 19 and 28 minutes for the axial load ratios, 0.9 and 0.6 respectively. The results of 40 MPa concrete showed the much lower fire resistance performance when comparing with those of 24 MPa concrete. The fire resistance performance was not increased significantly when the axial load ratio was reduced. Therefore, the deceased fire resistance performance of high strength concrete is assumed to be caused by the internal pressure increase upon the heat application.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4205-4209
• /
• 2011

The $Li_2Mn_{0.5}Fe_{0.5}SiO_4$ silicate was prepared by blending of $Li_2MnSiO_4$ and $Li_2FeSiO_4$ precursors with same molar ratio. The one of the silicates of $Li_2FeSiO_4$ is known as high capacitive up to ~330 mAh/g due to 2 mole electron exchange, and the other of $Li_2FeSiO_4$ has identical structure with $Li_2MnSiO_4$ and shows stable cycle with less capacity of ~170 mAh/g. The major drawback of silicate family is low electronic conductivity (3 orders of magnitude lower than $LiFePO_4$). To overcome this disadvantage, carbon composite of the silicate compound was prepared by sucrose mixing with silicate precursors and heat-treated in reducing atmosphere. The crystal structure and physical morphology of $Li_2Mn_{0.5}Fe_{0.5}SiO_4$ was investigated by X-ray diffraction, scanning electron microscopy, and high resolution transmission electron microscopy. The $Li_2Mn_{0.5}Fe_{0.5}SiO_4$/C nanocomposite has a maximum discharge capacity of 200 mAh/g, and 63% of its discharge capacity is retained after the tenth cycles. We have realized that more than 1 mole of electrons are exchanged in $Li_2Mn_{0.5}Fe_{0.5}SiO_4$. We have observed that $Li_2Mn_{0.5}Fe_{0.5}SiO_4$ is unstable structure upon first delithiation with structural collapse. High temperature cell performance result shows high capacity of discharge capacity (244 mAh/g) but it had poor capacity retention (50%) due to the accelerated structural degradation and related reaction.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권7호
• /
• pp.799-805
• /
• 2014

최근 대기오염 방지를 위한 각종 규정들이 강화되고, 연료유 가격의 상승으로 인해 LNG(Liquefied Natural Gas)를 선박의 추진연료로 사용하는 Gas Fuelled Ship의 등장은 필연적이게 되었다. 본 연구에서는 Gas Fuelled Ship에서 연료로 사용되는 LNG를 DF(Dual-Fuel)엔진에 공급하기 전 기화 시켜주기 위해 Eglycol water(Ethylene glycol water)를 가열매체로 사용한 재기화 시스템을 구성하고, Eglycol과 물의 혼합비율에 따른 시스템 특성을 분석하여 다음과 같은 결과를 얻었다. DF엔진으로 공급되는 천연가스의 압력과 온도 그리고 유량이 일정하게 유지될 때 Eglycol의 혼합비율이 증가할수록 Eglycol water의 혼합비열이 낮아지게 되면서 물만을 사용했을 때와 대비하여 1.65배 많은 cycle 유량과 1.54배의 펌프 소요 동력이 요구됨을 확인하였고, vaporizer의 크기를 고정한 후 Eglycol의 혼합비에 따른 DF엔진으로 공급되는 천연가스의 온도 및 vaporizer 출구측 Eglycol water의 온도를 산정하였다.