• Earthquakes and Structures
• /
• v.19 no.1
• /
• pp.29-44
• /
• 2020

The effectiveness and the sensitivity of a Wireless impedance/Admittance Monitoring System (WiAMS) for the prompt damage diagnosis of two single-storey single-span Reinforced Concrete (RC) frames under cyclic loading is experimentally investigated. The geometrical and the reinforcement characteristics of the RC structural members of the frames represent typical old RC frame structure without consideration of seismic design criteria. The columns of the frames are vulnerable to shear failure under lateral load due to their low height-to-depth ratio and insufficient transverse reinforcement. The proposed Structural Health Monitoring (SHM) system comprises of specially manufactured autonomous portable devices that acquire the in-situ voltage frequency responses of a network of twenty piezoelectric transducers mounted to the RC frames. Measurements of external and internal small-sized piezoelectric patches are utilized for damage localization and assessment at various and increased damage levels as the magnitude of the imposed lateral cycle deformations increases. A bare RC frame and a strengthened one using a pair of steel crossed tension-ties (X-bracing) have been tested in order to check the sensitivity of the developed WiAMS in different structural conditions since crack propagation, damage locations and failure mode of the examined frames vary. Indeed, the imposed loading caused brittle shear failure to the column of the bare frame and the formation of plastic hinges at the beam ends of the X-braced frame. Test results highlighted the ability of the proposed SHM to identify incipient damages due to concrete cracking and steel yielding since promising early indication of the forthcoming critical failures before any visible sign has been obtained.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2038-2045
• /
• 2021

The main objective of this work is to propose a reliable routine standard operation procedures (SOP) for structural health monitoring and diagnosis of nuclear power plants (NPPs). At present, NPPs have monitoring systems that can be used to obtain the quantitative health record of containment (CTMT) buildings through system identification technology. However, because the measurement signals are often interfered with by noise, the identification results may introduce erroneous conclusions if the measured data is directly adopted. Therefore, this paper recommends the SOP for signal screening and the required identification procedures to identify the dynamic characteristics of the CTMT of NPPs. In the SOP, three recommend methods are proposed including the Recursive Least Squares (RLS), the Observer Kalman Filter Identification/Eigensystem Realization Algorithm (OKID/ERA), and the Frequency Response Function (FRF). The identification results can be verified by comparing the results of different methods. Finally, a preliminary CTMT healthy record can be established based on the limited number of earthquake records. It can be served as the quantitative reference to expedite the restart procedure. If the fundamental frequency of the CTMT drops significantly after the Operating Basis Earthquake and Safe Shutdown Earthquake (OBE/SSE), it means that the restart actions suggested by the regulatory guide should be taken in place immediately.

• Electronics and Telecommunications Trends
• /
• v.37 no.2
• /
• pp.30-41
• /
• 2022

As the society is superaging, the number of patients with movement disabilities due to musculoskeletal or nervous system illness is rapidly increasing. To improve public health and reduce medical expenses, it is essential to develop rehabilitation systems that allow patients to resume their daily-life activities. However, the existing musculoskeletal illness diagnosis and rehabilitation method is limited in terms of precision and efficiency because it is based on an empirical diagnosis and prescription without regard for individual characteristics. To overcome these limits, it is critical to design a novel concept of routine rehabilitation therapy device that is capable of inducing musculoskeletal balance by the precise analysis of musculoskeletal usage patterns via the motion and the muscle activity tracking of linked muscles. This study introduces the trend of on-skin sensor device technology for routine musculoskeletal monitoring and therapy. For on-skin rehabilitation systems, skin-adhesive and stretchable motion/posture, electromyography, pressure sensors, small-size and low-power wireless sensor interfaces, and user-friendly rehabilitation contents based on new algorithms are combined.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.436-438
• /
• 2007

As the sensors and communication technology get advance, the remote health diagnosis for patients and senior persons at home are possible now without visiting doctors in hospitals. A low-power ubiquitous health check device was developed adapting Real-Time Embedded Linux is developed. This ubiquitous device is consisted of three sensors. The wrist type health checking terminal acquires periodically the health data by using a blood pressure sensor, a pulse sensor and a body temperature sensor. It transmits the health data to the access point located at the home center through the ZigBee wireless communication modem. This health data collector or access point device sends the data again to the main server operated in a hospital or health care organization. The health server control continuously the input data and sends an alarm signal to the assigned. doctor and responsible persons using cellular SMS when any dangerous events occur. This wrist type health check device has an embedded linux OS using Intel PAX255 MPU. The developed U-Health system is applicable for checking patients health in remote at home. And their family or related persons in remote site can check the patients health status at any time. They can be assured by receiving SMS record and alarm of emergency case which is transmitted from the health server.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1211-1220
• /
• 2015

There exists dead zone from the aspects of health equity and health medical equity for maritime personnel. They could not have been benefited from disease prevention and health promotion in comparison with shore personnel due to the restricted medical accessibility caused by long voyage ship operation. Furthermore, the system of health management and medical assistance for maritime personnel is insufficient, the continuous health monitoring system does not exist, nor health diagnosis system, maritime industrial accidents and occupational disease control systems are adequate. The International Maritime Organization and the International Labour Organization recommend their Member Governments to take necessary measures in the management of seafarers' health and diseases through conducting continuous and systematic investigation. Thus, this study intends to propose action strategy and tasks for introducing marine telemedicine system aiming to provide seafarers with health management service for the years to come. The conclusions of this study can be given as follows. First, it is required that a systematic medical service system needs to be provided to promote seafarers' health. Second it is recommended to establish the marine telemedicine system incorporating U-Health technology. Third, it is necessary to revise the relevant laws and regulations to introduce the marine telemedicine system. Fourth, it is also necessary to provide various assistance system at the national level in the furtherance of global marketing of marine telemedicine system.

• Smart Structures and Systems
• /
• v.4 no.4
• /
• pp.391-406
• /
• 2008

This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT), in which debonding is detected without relying on previously-obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectibility of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system. Comparisons with an electro-mechanical impedance method and an inferred imaging technique are provided as well.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.92-95
• /
• 2019

Automation control and the data for control of industrial equipment for the diagnosis and prediction is a key to success in the 4th industrial revolution. It increases process efficiency and productivity through data collection, realtime monitoring, and the data analysis. However, university and research environment are still suffering from logging the data in manual way, and we occasionally loss the equipment data logging due to the lack of automatic data logging system. State variable presents the current condition of the equipment operation which is closely related to process result, and it is valuable to monitor and analyze the data for the equipment health monitoring. In this paper, we demonstrate the collection of equipment state variable data via programmable logic controller (PLC) and the visualization of the collected data over the Web access supervisory control and data acquisition (SCADA). Test vehicle for the implementation of the suggested SCADA system is a relay switched physical vapor deposition system in the university environment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.117-126
• /
• 1994

Some of the important and vital roles performed by the Health Care Center of Pohang Iron & Steel Co., Ltd.(POSCO) are the periodic monitoring of the work sites as well as regular medical check-ups for each workers to ensure both pleasant and safe working conditions and to protect employees' health. Pohang Steel Works, which has 42 plants, 26 facilities and 12,000 employees, has an annual crude steel production capacity of 9,670,000 using 24,500,000 ton of raw materials. We have measured lots of areal and personal working environment according to Occupational Safety and Health Law semiannually. All data collected on industrial hygiene is stored and managed by personal computer. The developed of a computerized industrial hygiene control system linked to the company's main computer system will provide efficient evaluation of the working environment as well as critical informations on employees' health. Development of this system had begun in May, 1992 and was completed in March, 1994. The computerized industrial hygiene control system can; 1. store industrial hygiene data, providing key pertinent to the diagnosis of occupational related illnesses, and if necessary, the basis for improving the working environment, 2. decide type and time of medical examination of each work for exposure to specific agents, and supply proper protection periodically, 3. prevent occupational related illnesses through evaluation of environmental and biological monitoring, and performance of epidemiological surveillance, 4. facilitate proper job placement through linking of industrial hygiene control and personnel information systems, 5. monitor job processes. levels of chemical agents used, and new agents introduced, 6. and increase productivity by saving time resulting from the implementation of the computerized sysyte,

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.6
• /
• pp.575-582
• /
• 2016

Seoul city has high population density as well as high traffic congestion, which are vulnerable to exposure of environmental pollutions caused by car traffic. However, recent studies are only on local regions about road traffic and air pollution or health effect of road traffic on residents. Thus, comprehensive study data are needed in terms of overall Seoul regions. In this study utilized the nitrogen dioxide concentration through the national air pollution monitoring network data, 2012 to 2013. It also divided regions into high and low exposure districts via the Origin destination data developed by the Korea transport institute to quantify and evaluate the effect of transport policies and analyzed a correlation of asthma symptoms with high and low exposure districts through raw data of community health survey from the Korea centers for disease control and prevention. Based on the collected data, the pearson's correlation analysis was conducted between air pollution substance concentration and high exposure district and multiple logistic regression analysis was conducted to determine the effect of traffic environment and factors on asthma symptoms of residents. Accordingly, the following results were derived. First, the high exposure district was higher concentrations of nitrogen dioxide ($NO_2$) as per time compared to those of the low exposure district (p<0.01). Second, analysis on correlation between average daily environmental concentration in the air pollution monitoring network and road traffic showed that nitrogen dioxide had a significant positive correlation (p<0.01) with car traffic and total traffic as well as with truck traffic (p<0.05) statistically. Third, an adjusted odds ratio about asthma doctor's diagnosis in the high and low exposure districts was analyzed through the logistic regression analysis. With regard to an adjusted model 2 (adjusted gender, age, health behavior characteristics, and demographic characteristics) odds ratio of asthma doctor's diagnosis in the high exposure district was 1.624 (95% CI: 1.269~2.077) compared to that of the low exposure district, which was significant statistically (p<0.001).

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2202-2208
• /
• 2010

The railway in Korea has been one of important transportation means as the introduction of high-speed train and progress in subway systems. Also, as increases in the speed of train, the guarantee of safety becomes more important, especially, in the fields of railway vehicles and/or facilities. The structural health evaluation for the prevention and diagnosis of the accidents could be conducted using several types of nondestructive evaluation techniques such as ultrasonic developed using infrared thermography or optic fiber sensors. In this paper, the recent progress in structural health evaluation for railway systems has been introduced, and the case studies have been discussed.