• 패션비즈니스
• /
• 제11권6호
• /
• pp.24-34
• /
• 2007

This study aims to suggest basic data for the production of hats for aged women. The subjects were 151 females who are 60 years old or above and live in Busan. Their hat-wearing reality was inquired and their head parts were measured, which led to the following conclusion: 1. Results of Hat-Wearing Reality Inquiry 64.9% answered they are unsatisfied with the size system of the available hats at present, implying the necessity for improving the current dimension system. 92.7% responded hat dimensions need to be subdivided, while 97.4% were for the necessity of hat size system. 74.8% expressed their will to buy ordered hats because they can find the hats of right sizes and designs. 2. Results of Head-Part Measurement Experiments According to head-part measurement, head circumference A was 53.26cm, head circumference B 54.19cm, and head circumference C 57.69cm on the average. Cluster analysis revealed three types. Type 1 (24%) with small head length and circumference is the smallest head with a wide upper part. Type 2 (33%) has long head height, short bitragion arc A, and thick head breadth. Type 3 (43%), owing to big head circumference and length as well as high values in vertical items. Considering head circumference B (HCB) and bitragion arc A (BAA), a new hat size system of 3 sizes (HCB: BAA) was chosen: S (52cm: 29cm), M (53-55cm: 30cm), and L (56-57cm: 31cm).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.155-156
• /
• 2007

This paper presents the vision-based camber and optimal cutting line detection algorithm for hot-rolling process. It is important to measure the camber of head and tail part of strips because many problems are caused by the camber in the hot-rolling process. The hot-rolling process has time constraints. The camber detection algorithm of head and tail parts requires fast and less complex for satisfying time constraints. The proposed algorithm consists of two parts: measurement of the camber in the head and tail part of strips and decision part of the optimal cutting line of hot-rolled strip. First, we obtain the camber value of the strip from the difference between the real center line and the center line of head, tail part. Second, the head and tail part of strips isn't suitable for strips connections. Therefore, the cutting process is needed in the hot-rolling process. The optimal cutting line is determined by the head and tail images obtained from cameras. The algorithm is applied into the vision system with two area cameras, Matrox image processing board and host PC for verification.

• Journal of International Society for Simulation Surgery
• /
• 제2권1호
• /
• pp.13-16
• /
• 2015

Purpose We conducted a study on the reconstruction of the head's shape in 3D using the ToF depth sensor. A time-of-flight camera (ToF camera) is a range imaging camera system that resolves distance based on the known speed of light, measuring the time-of-flight of a light signal between the camera and the subject for each point of the image. The above method is the safest way of measuring the head shape of plagiocephaly patients in 3D. The texture, appearance and size of the head were reconstructed from the measured data and we used the SDF method for a precise reconstruction. Materials and Methods To generate a precise model, mesh was generated by using Marching cube and SDF. Results The ground truth was determined by measuring 10 people of experiment participants for 3 times repetitively and the created 3D model of the same part from this experiment was measured as well. Measurement of actual head circumference and the reconstructed model were made according to the layer 3 standard and measurement errors were also calculated. As a result, we were able to gain exact results with an average error of 0.9 cm, standard deviation of 0.9, min: 0.2 and max: 1.4. Conclusion The suggested method was able to complete the 3D model by minimizing errors. This model is very effective in terms of quantitative and objective evaluation. However, measurement range somewhat lacks 3D information for the manufacture of protective helmets, as measurements were made according to the layer 3 standard. As a result, measurement range will need to be widened to facilitate production of more precise and perfectively protective helmets by conducting scans on all head circumferences in the future.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1268-1278
• /
• 2004

Measurement of noise is not only to know the information of acoustic pressure but to assess human response to noise. To find human response to transportation noise through the laboratory study we have to measure and reproduce noise. The method of noise reproduction is largely divided into monaural and binaural techniques. But human fundamentally hears sound through both ears, referred as binaural hearing. Binaural signal is different from monaural signal because it includes more information of physical phenomena like acoustical reflection, diffraction and refraction. Especially head and pinna play an important role in perceiving change of signal origin. So, the amplitude of binaural signal is higher than that of monaural signal and spectrum of both signals is discriminated. Most of assessment and regulation of transportation noise are, however, based on monaural measurement techniques. The quantitative difference between monaural and binaural measurement is investigated in this study. Comparison on several transportation noisesshows defect of information in monaural measurements.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.291-300
• /
• 1996

This study is to determine the biomechanical characteristics of Korean. Male 58 and Female 54 were participated for the measurement which was performed by immersion method and reaction board method. Body parts were head with neck, trunk, upper arm, forearm, hand, thigh, leg, and foot. Their volumes were measures by immersion method. Their weight were determined by using Dempster(1995), Drills and Contini(1969) density data. Each center of body part weight were determined by specific posture on the reaction board. The postures were asked to the subject forearm- lifted posture, total let- lifted posture, foot-lifted posture. According to each posture, the center of each part were calculated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1349-1354
• /
• 2008

In this study, we try to find the root cause of water condensing failures in a headlamp using chemical and mechanical analysis. Through the surface inspection by OM, SEM and CT, it was found that water infiltrate into the headlamp through hotmelt adhesive debonding part caused by adhesion force degradation and poor quality. IR spectra shows that adhesion force degradation are characterized by increase of some functional group(1742, 1710, 1649, 1016). Through the ESPI measurement, it is turned out that bonding structural change by thermal expansion and degradation of adhesive can be the cause of void generation. So it is recommended that cooling passage and the bonding part should be redesigned to give a guarantee of less thermal stress and high adhesion quality.

• 한국주거학회논문집
• /
• 제15권3호
• /
• pp.11-19
• /
• 2004

The purpose of this study is to explain the tectonic characteristics of 'Kan' which is an unit of composition in the head residence of Uisong Kims. Here, the 'Kan' is assumed as a conceptual framework to organize a house and also a maneuvering tool to control the spatial order with relationship between the whole and the part. Not limited to the simple conceptual aspects, but the interrelated elements such as the site conditions, modules, functions, structure and aesthetic factors. Through the process of the study, the role of 'Kan' is proved to be a tectonic tool for self-regulating architectural order by relation matrix of elements. 'Kan' is not only a fixed measuring tool for functions and material of a house but also a flexible device to control the building composition. 'Kan' is certainly a relative subject for measurement of form, space and aesthetic quality.

• PNF and Movement
• /
• 제21권2호
• /
• pp.265-272
• /
• 2023

Purpose: The purpose of this study was to investigate tactile sense perception of the lower extremities according to physical function in children with spastic cerebral palsy. Methods: This study was conducted on 15 children diagnosed with spastic cerebral palsy. Physical function measurement items included dynamic balance ability, gross motor function level, and lower extremity ankle spasticity. The lower extremity tactile sensation uses a monofilament to measure the sole of the first metatarsal head, the sole of the fifth metatarsal head, the heel, the anterior part of the shin midway between the patella and the ankle joint, the kneecap, the upper anterior iliac spine, and the knee. A total of six measurements were taken in the mid-femoral region of the bone. Spearman correlation analysis was performed to determine the degree of body function and lower extremity tactile perception. Results: As the physical function of children with spastic cerebral palsy deteriorated, there was a decrease in tactile sensation in the thigh area corresponding to the proximal lower extremity. (p <.05). Conclusion: Children with spastic cerebral palsy and poor physical function have sensory loss not only in the distal part but also in the proximal part, so a treatment approach that recognizes and improves it is necessary.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.363-368
• /
• 2002

An automobile hub is composed of a hollow cylindrical part with inner and outer diameters. These hub diameters must be precise, as any irregularities in them (diameters) can influence/degrade the motion of an automobile with this problem. Highly accurate and reliable hub inner and outer diameters measurement systems are therefore required for inspection of the diameters. In this research, an automobile hub inner and outer diameters measurement system has been developed and tested. The system consists of measuring heads with LVDT sensors, and associated software for automatic measurement and calibration of the diameters and the sensors respectively. The system has been evaluated in comparison with an existing measurement system, and the following outcomes have been achieved; .Improved and guaranteed quality and reliability .Increased productivity and cost reduction. These results prove the system developed in this research to be suitable for automobile hub inspection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.58-60
• /
• 2007

Magnetic Resonance Imaging(MRI) has become a very widely used medical procedur e. Clo.sed and open systems are typically used with static magnetic fields at or below 2 Tesla. BWhole body SAR(specific absorbsion rate) is the value of SAR averaged over the entire body of the patient over any period of 15 minutes. Head SAR is the value of SAR averaged over the head of the patient for any period of 10 minutes. SAR is a measure of the absorption of electromagnetic energy in the body' (typically in watts per kilogram (W/kg)). The normal operating mode comprises values of head SAR not higher than 3 W/kg. The second level controlled operating mode comprises values higher than 3 W/kg. Current FDA guidance limits the SAR in the whole body. including the head to a range of 1.5 to 4.0 W/kg, depending on the patient's clinical condition. SAR, limit restrictions are incorporated in all MRI systems. and domestic' s guidance limits the SAR in a part body. including the head to 3.2w/kg and less. The purpose of this study is to evaluate on change of head SAR in using MRI pulse sequence and to check if exceed 3.2(w/kg) level in domestic a part exposure through measured head SAR. 23 patient's the average head SAR of pulse sequence is that T2WI sagittal is 0.5375. T2WI axial(FSE) is 0.4817, T1WI axial(SE) is, 0.8179. FLAIR axial is 0.4580. GRE axial is 0.0077, Diffusion is 0.0824w/kg. The head SAR exposed per patient was proved 2.3845w/kg less than the international standard. Coefficient of correlation for the relations body weight and SAR or for the relations ETL(echo train length) and SAR is 1 value. Coefficient of correlation for the relations between TR(time to repeat) and SAR is -0.602 value. so SAR increased relative to weight body and ETL. But the relations between TR and SAR is negative definite.