• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.677-684
• /
• 2020

Miscentering in the left and right X axis direction during CT examination affects dose and quality. When the CT Gantry Isocenter and the center of the examination objective are matched using the Lateral Sliding Table, the image quality is improved and the exposure dose is reduced. CTDI Head Phantom (Kimda, Korea) and dosimeter (Ray Safe, Sweden) were used to measure dose comparison CTDI (mGy) due to center deviation, and Water Phantom (HITACHI, Japan) was used to measure noise to see the difference in uniformity due to center deviation. Measurements of doses for dose comparison CTDI (mGy) with a deviation showed that doses were consistently reduced and exact dose was not projected until they were moved to 80 mm by 20 mm from the Isocenter. SD values were measured to see the difference in uniformity due to center deviation and the noise continued to increase until it was moved by 20 mm to 80 mm. The range of collimation has increased by the extent of deviating from the center and the range of exposure has increased. Using the Lateral Sliding Table, you can easily adjust the Isocenter, increase the quality of the image by adjusting the Isocenter in areaa such as the cardiac examination of the location away from the Isocenter, Extreme bone and Shoulder, and greatly reduce the collimation to the Isocenter, so it can be used to reduce unnecessary exposure dose.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.6
• /
• pp.45-58
• /
• 2015

The aim of this study is to suggest a semi-empirical equation for estimating the hydraulic conductivity of sands using geoelectrical measurements technique. The suggested formula is based on the original Kozeny-Carman equation; therefore varying factors affecting the Kozeny-Carman equation were selected as the testing variables, and six different sands with varying particle sizes and particle shapes were used as the testing materials in this study. To measure both hydraulic and electrical conductivities, a series of constant head permeameter tests equipped with the four electrodes conductivity probe was conducted. Test results reveal that the effects of both pore water conductivity and flow rate in relation between hydraulic conductivity and formation factor (=pore water conductivity / measused conductivity of soil) of tested materials are negligible. However, because the variations of hydraulic conductivity of the tested sands according to particle sizes are significant, the estimated hydraulic conductivity using the formation factor varies with particle sizes. The overall comparison between the measured hydraulic conductivity and the estimated hydraulic conductivity using the suggested formula shows a good agreement, and the variation of hydraulic conductivity with varying Archie's m exponents is smaller compared with varying porosities.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.65-73
• /
• 2008

The present work deals with subjective assessments to propose the objective parameter related to the subjective attribute of reverberation in the coupled room varied the aperture opening size. A 1/10 scale model was built and used for the measurements and subjective assessments. For the subjective tests, binaural impulse responses(BIRs) were measured using a dummy head and the measured BIRs were convolved with anechoic recorded music for the presentation over the headphones. The results showed that the perceived reverberation was the largest in the aperture opening size 12.5%(1.97% of mail) room surface area)and decreased with increasing the aperture opening size over 25% (3.94% of main room surface area) in the main room coupled with the secondary reverberant room. In the main room coupled with the secondary absorptive room, there was no changes in the perceived reverberation up to the aperture opening size 6.25%(0.99% of main room surface area) and it gradually decreased with increasing the aperture opening site over 12.5%. The objective parameter, T30/T15, showed a very low correlation with the perceived reverberation in the coupled room varied the aperture opening size but showed a high correlation with a new objective parameter, T30/Tbp, proposed by the authors. Because the late part decay energy more rapidly increases with increasing the aperture opening site than the early and middle part decay energy, the LDT/EDT or T3/T1 is a better quantifier to measure double slopes in the coupled room than the T30/T15.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.69-77
• /
• 2020

Korea's golf fever is as good as the United States, Europe and Japan, which are called golf powers. The senior golf population over 55 years old has exceeded 2.5 million, and they are more interested in improving golf performance than participating in golf. So, this study aims to emphasize the importance of dynamic preparation exercise by identifying the effects of dynamic preparation exercise on golf physical strength and golf batting in order to suggest a way to help the elderly men's golf performance. The experimental group(n=13) and the control group(n=14) were divided into two groups and repeated measurements were conducted by two-way ANOVA with pre- and post-design. As a result of the analysis, the flexibility factor showed a positive effect on golf physical strength, and in golf batting, head speed, distance, and attack angle showed interaction effect, which led to the conclusion that dynamic preparation exercise helped the golf performance of the elderly male. Therefore, the continuous dynamic preparation exercise led to positive transition to head speed and attack angle due to the increase in the flexibility of the body, which led to the improvement of distance and the increase in performance level.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.455-474
• /
• 1993

Degenerative joint disease(DJD) has hun known as one of the diseases which affect the middleor old-aged people. But as orthodontists are getting interested in the adult orthodontics, it is not rare for them to meet the open-bite patients with the TMJ DJD in their clinics. The purpose of this article is to investigate the cephalometric characteristics of the open-bite cases with TMJ DJD. Twelve TMJ DJD patients($15.1\~39.5$ years old) were selected from the patients who visited Department of Orthodontics, Seoul National University Hospital. Cephalograms were taken and means from 60 measurements were compared by t-test with those of the fifty four healthy adults($20.0\~26.7$ years old) who have normal occlusion and TMJ. In this study male and female are compared respectively, for in the normal samples 26 measurements showed significant differences between the male and the female. The results and conclusions axe as follows: 1 In DJD group, ANB and Angle of convexity decreased, which means the retruding of the mandible. The interincisal angle was smaller than that of the normal group. The means of the overbite were -2.1mm in male and -3.0mm in female, and the means of the overjet were 5.6mm in male and 6.7mm in female. The profile was similar to that of Angle's Class II div.1 open-bite. 2. SN-GoMe and FMA increased in DJD but SN-PP and FH-PP did not show any significant difference. In TMJ DJD open-bite cases, the bony structure lower than the palatal plane seemed to play an important role in developing open-bite. 3. In DJD group, PH-ArGo, SArGo and Y-sxis angle increased significantly, but genial angle showed no significant difference. The means of hか were 50.1mm in male and 40.2mm in female, which were significantly smaller than those of the normal(56.5mm in male, 50.9mm in female). These findings seemed to indicate the posterior rotation of mandible resulted from the shortening of the ramus height. 4. Anterior faical height(AFH), upper anterior facial height(UAFH) and lower anterior facial height (LAEH) of DJD showed no significant increase as compared with those of the noraml group. There was no significant difference in the ratio of upper anterior facial height to lower anterior facial height(UAFH/LAFH). But, lower posterior facial height(LPFH) was significantly smaller than that of the normal group. 5. It was thought that the peculiar profile of the TMJ DJD open-bite was resulted from the posterior rotation of mandible as the ramus became short following the degerative destruction of of the condylar head and neck.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.630-641
• /
• 2002

The purpose of this study is to suggest the standard of bodytype which offers various data with regard to three-dimensional characteristics of body, and which offers the criterion for the sizes and shapes to interpret various bodytypes, to estimate filling, and to construct ready-made clothing. In this study, standard bodytype was defined as a typical type with beautiful proportion and shape which a large number of people have, too. In order to continue this study, there were two ways of analyzing bodytypes of subjects in the view of statistics and beauty. We primarily carried on statistical analysis in this report. Taken as a sample, the subjects were ninety-seven females who were between the ages of 18 and 24 years o1d. They were measured on November 1999. The data of seven hundred and few females, 18∼24 year-old, from the National Somatometry Survey of 1997 were used for analysis, too. Three kinds of classification methods were used for statistical analysis. The first method was based on the lateral view of the body, the second was based on the Factor and Cluster analysis of the photographic measurements of each of the anterior and lateral body, and the third was based on the Factor and Cluster analysis of the anthropometric measurements of the whole body. From the analysis on the distribution of R hrer Index the difference of width, the difference of depth, the proportion of height and head height, the High-frequency Proportion(H.P.)range were selected. The straight type from the lateral view, High-frequency type from each method, and subjects in H.P. range were compared with each other. As the result, it was confirmed that it is proper to base on the size and shape of subjects in H.P. range to analyze the standard bodytype.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.174-188
• /
• 1999

The purpose of this study is to evaluate the precision and accuracy of a three dimensional cephalogram constructed by using the frontal and lateral cephalogram of twelve human dry skulls. After achieving the three dimensional image reconstruction program, we tried to apply this program to two dentofacial deformity patients. 1. Conventional nasion relator in cephalostat was used to reproduce the same head position for the same dry skull. The mean difference of the three dimensional cephalogram for the same dry skull was $0.34{\pm}0.33mm$. Closeness of repeated measures to each skull reveals the precision of this method for the three dimensional cephalogram. 2. Concerning the accuracy, the mean difference between the three dimensional reconstruction data and actual lineal measurements was $1.47{\pm}1.45mm$ and the mean magnification ratio was $100.24{\pm}4.68%$. This Diffrerence is attributed mainly to the ill defined cephalometric landmarks, not to the positional change of the dry skull. 3. Cephalometric measurement of lateral and frontal radiographs had no consecutive magnification ratio because of the different focus-object distance. The mean difference between the frontal and lateral cephalogram to the actual lineal measurements was $4.72{\pm}2.01mm$ and $-5.22{\pm}3.36mm$. Vertical measurements were slightly more accurate than horizontal measurements. 4. Applying to the actual patient analysis, it is recommendable to use this program for analyzing the asymmetry or spatial change after operation. The orthodontic bracket would be a favorable cephalometric landmark for constructing the three dimensional images.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.157-164
• /
• 2014

The contact force between the pantograph and the catenary is a key factor determining the current collection quality, as they can ensure stable electrical power to the train. In this study, we analyzed the dynamic contact force for HEMU-430X depending on the train speed. It was confirmed through the results that the standard deviation of the contact force increases with an increase in the train speed. It was also verified that the span of the catenary system is a very important factor with regard to the contact force when analyzed with frequency analysis. To secure stable power in speed that exceeds 400km/h, the statistical variation of the contact force should be minimized. To realize this, the catenary tension was increased and the mass of the pan-head was decreased. The ensuing effects were then quantitatively analyzed in terms of the contact force. In addition, the differences in the contact force between a tunnel and an open field were analyzed based on a frequency analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06a
• /
• pp.65-81
• /
• 2003

During the last few decades in Korea, the development of hillside or mountain areas has rapidly increased for infrastructure construction such as railroads, highways and housing. Many landslides have occurred during these constructions. Also, the amount and scale of damage caused by landslides have increased every year. In the case of Far East Asia including Korea, the damage of landslides is consequently reported during the wet season. In this paper, the effect of stabilizing piles on slope stability is checked and the behavior of slope soil and piles are observed throughout the year by field measurements in the large-scale cut slopes. In particular a large-scale cut slope situated on the construction site for the express highway in Donghae, Korea. First of all, The behavior of the slope soil was measured by inclinometers during slope modification. Landslides occurred in this area due to the soil cutting for slope modification. The horizontal deformations of slope soil gradually increased and rapidly decreased at depth of sliding surface indicating that the depth of sliding surface below the ground surface can be predicted. On the basis of being able to predict the depth of the sliding surface, stabilizing piles were designed and constructed in this slope. To ensure the stability of the reinforced slope using stabilizing piles, an instrumentation system was installed. The maximum deflection of piles is measured at the pile head and it is noted that the piles deform like deflection on a cantilever beam. The maximum bending stress of piles is measured at the soil layer. The pile above the soil layer is subjected to lateral earth pressure due to driving force of the slope, while pile below soil layer is subjected to subgrade reaction against pile deflection. As a result of research, the effect and applicability of stabilizing piles in large-scale cut slopes could be confirmed sufficiently.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.237-245
• /
• 2012

Objective: The aim of the study is to analyze female adult's body shape characteristics and to provide the basic information for clothing manufacturing. Background: The comparative study among the age groups is very fundamental to understand the body characteristics of each subjects group. Therefore, comparison of body measurements in age groups was applied in this study. Method: The study was fulfilled by the comparison between the data of the $5^{th}$ Anthropometry of Size Korea (2004) and the $6^{th}$ Anthropometry of Size Korea(2010). The subjects were 2,213 female adults aged 20~59 of the 5th Size Korea anthropometric survey and 2,025 female adults aged 20~59 of the 6th Size Korea anthropometric survey. Results: The differences indicated the decreased values in widths, depths, girths regarding the torso region and BMI. "Head height to Stature ratio" decreased significantly in the 6th data, on the other hand, "Crotch height to Stature ratio" increased in the 6th data. Through the distribution characteristic of the age groups by Stature groups, it was convinced that 160cm stature group is the most frequent among all age groups of the 6th Size Korea. Conclusion: As a summary, the meaningful differences were showed between the 5th anthropometric data and the 6th data. According to the 6th Size Korea, the distribution tendency of obesity is very similar to the 5th Size Korea data. But the percentage of obese women declined significantly. Application: These findings from the study can be utilized women's wear design and construction that reflect body characteristics.