• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.1
• /
• pp.14-37
• /
• 2014

Objectives: Since information on biological factors in the workplace are currently lacking, I wanted to create a handbook of these factors that would be viewable at a glance as a means to more effectively prevent occupationally-infected diseases. Proper information on biological hazards in the workplace allowing the appropriate recognition of the harmful factors is desperately needed. Methods and Results: In this study, I intended to create a high-utility handbook of biologically hazardous agents in the workplace. To ensure its effectiveness, information and references about biologically hazardous agents in the workplace were analyzed and classified and pathogen safety data sheets(PSDS) sourced from the Public Health Agency of Canada were included. I intended to make it accessible from the point of view of workers and their employers. A more effective classification system of occupational infectious diseases is presented, and biologically hazardous agents were classified according to occupations, industries, infectious diseases, and so on. The handbook consists of 60 major kinds of biologically infectious occupational factors that are expected to be generated in workplaces in Korea, and are focused on practical utility. The pathogen safety data sheets(PSDS) of 192 species were also included. To allow more effective management, domestic and foreign laws and regulations are presented. Conclusions: This case report presents general information on the history and contents of the handbook and PSDS, it will also be useful in workplaces if download from the homepage of OSHRI, KOSHA(oshri.kosha.or.kr/bridge?menuID=901).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.67-75
• /
• 1998

The objectives of this study were both to evaluate the level and correlations of hazardous agents and to suggest measures to control industrial hygiene problems caused by using water-soluble metalworking f1uids(MWF). Geometric mean of formaldehyde(0.039 ppm) was higher than criteria of NIOSH(0.016ppm). Formaldehyde, originally existed in the biocide, is released and used to kill microbes in soluble MWF. Microbe concentrations were above $10^4No./mL$ in 14 MWF tanks among 20 tanks surveyed. Nitrosamines that is formed by reaction of nitrosating group and amines was detected to $18.4-47.1{\mu}g/m^3$. Formaldehyde concentration was low when microbes were abundant(r=-0.67, p=0.011), and high when open tank area was wide(r=0.75. p=0.012). The significant relationship between pH and microbes(r=-0.76. p=0.003) was also observed. The predominant bacteria species in MWF were Pseudomonas spp., Bacillus spp., Comamonas testosteroni, Acinetobacter haemolyticus, Bordertella bronchiseptica in order. Therefore, hazardous agents emitted by using water-soluble MWF seems to be correlated microbial growth. In order to minimize worker's exposure to several hazardous agents by an water-soluble MWF and to increase productivity, microbial growth must be controlled to the lowest level as possible. Administrative control as well as engineering control must comprehensively be applied to control microbe's growth in water-soluble MWF.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2016

Objectives: The aim of this study is to review the results of exposure to chemicals and to extremely low frequency(ELF) magnetic fields generated in wafer fabrication operations in the semiconductor industry. Methods: Exposure assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until the end of 2015. The key words used in the literature search were "semiconductor industry", "wafer fab", "silicon wafer", and "clean room," both singly and in combination. Literature reporting on airborne chemicals and extremely low frequency(ELF) magnetic fields were collected and reviewed. Results and Conclusions: Major airborne hazardous agents assessed were several organic solvents and ethylene glycol ethers from Photolithography, arsenic from ion implantation and extremely low frequency magnetic fields from the overall fabrication processes. Most exposures to chemicals reported were found to be far below permissible exposure limits(PEL) (10% < PEL). Most of these results were from operators who handled processes in a well-controlled environment. In conclusion, we found a lack of results on exposure to hazardous agents, including chemicals and radiation, which are insufficient for use in the estimation of past exposure. The results we reviewed should be applied with great caution to associate chronic health effects.

• Journal of Yeungnam Medical Science
• /
• v.37 no.1
• /
• pp.22-31
• /
• 2020

There has been a growing concern and subsequent interest surrounding numerous reproductive toxic agents found in various working and non-working environments. Meanwhile, there have been many efforts in medical fields such as toxicology and epidemiology applying experimental studies to elucidate reproductive toxic agents' characterization and health effects. However, there remains insufficient research data and inadequate evidence in humans. Adverse reproductive outcomes vary from transient, moderate health effects to severely detrimental consequences, such as permanent infertility or childhood cancer of one's offspring. Furthermore, upon exposure to toxic agents, the latent period before reproductive health effects are observed is relatively short compared to other occupational diseases (e.g., occupational cancer); instant action is required once exposure to reproductive toxic agents is detected. Therefore, it is very important for workers and healthcare professionals to know about the reproductive toxic agents they are likely to be exposed to. In this review, we discuss the general epidemiology of reproductive health in Korea, and the information regarding these reproductive toxic agents.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.249-256
• /
• 2018

This article aims to provide a systematic review of the exposure assessment methods used to assign wafer fabrication (fab) workers in epidemiologic cohort studies of mortality from all causes and various cancers. Epidemiologic and exposure-assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until 2017. The studies found various outcomes possibly linked to fab operations, but a clear association with the chemicals in the process was not found, possibly because of exposure assessment methodology. No study used a tiered assessment approach to identify similar exposure groups that incorporated manufacturing era, facility, fab environment, operation, job and level of exposure to individual hazardous agents. Further epidemiologic studies of fab workers are warranted with more refined exposure assessment methods incorporating both operation and job title and hazardous agents to examine the associations with cancer risk or mortality.

• Proceedings of the SCSK Conference
• /
• 1992.09a
• /
• pp.97-114
• /
• 1992

In these days sun products are developed and produced by the cosmetic scientists in the world. Peoples need strongly to protect themselves from the hazardous UV rays dued to the destruction of ozone layer. Therfore, we, cosmetic scientists must have an effort to produce the more effective goods. In this article the market survey of sun-products as well as the currency of sunscreen agents was investigated. It was found that Benzophenone - 3 and Ocytyl methoxy cinnamate were widely used. The lotions, using Benzophenone - 3 as the chemical agents, and TiO$_2$and micro TiO$_2$ as the physical agents, were measured the UV-Spectrum in the Dilution and Application method. Photoprotective activity of chemical agents can usually be measured in solution state. However, that of the insoluble physical agents such as TiO$_2$is hardly measured in this state. Photoprotective ability of the insoluble physical agents was able to be measured by application of lotions to the surface of UV cells. It was found by this method that micro TiO$_2$showd stronger UV scattering effect than TiO$_2$in this method.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.73-86
• /
• 1999

This study was performed to find out factors affecting degree of satisfaction with workers' working environment. The study subjects were 165 workers who were working at painting process of twelve furniture manufacturing factories in Incheon area. We used self-administered questionnaire containing general characteristics, working conditions, the degree of satisfaction with working environment, and the degree of satisfaction with working condition. In addition, we measured the exposure levels of occupational hazardous agents. The results were as follows; 1. Correlations between the degree of satisfaction with workers' working environment and the measured of occupational hazardous agents did not affect the degree of satisfaction with workers' working environment. 2. Factors affecting the degree of satisfaction with workers' working environment were not the exposure levels of occupational hazardous agents, but the degree of satisfaction with working condition, size of industry, health status, and types of ventilation system. As the degree of satisfaction with working condition was increased, the degree of satisfaction with working environment was increased. Also, for the workers who had good health status, the degree of satisfaction with work environment was appeared to be high. To increase the degree of satisfaction, with workers' working environment, firstly, effective work management and production control are required. Also, the worker's effort to negotiate continuously with top manager on improving working conditions is required. Secondly, developing heath promotion program to be appropriate for the characteristics of worksite is required. Moreover, leading worker's participation in health promotion program is very important to increase the degree of satisfaction with workers' working environment.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.1
• /
• pp.49-56
• /
• 2002

Objectives : To identify the relationship between the use of medical services by workers with three types of respiratory diseases(total respiratory diseases, acute upper respiratory infections and chronic lower respiratory diseases) and exposure to hazardous agents after controlling for other factors affecting medical services use, such as characteristics of the enterprises(scale, industry type) and employee demographics (sex, age). Methods : The study population comprised 28,882 workers who had undergone general or special medical examinations at the industrial health center at least once between Jan 1995 and Dec 1997 and had possessed medical insurance during the period. We combined medical examination data with medical insurance data in order to analyze the relationship between exposure to hazardous agents and respiratory diseases, Results : Among the 28,882 study subjects, 17,454 employees(60.4%) used medical services more than once during 3-year study period, owing to more than one kind of respiratory diseases. In logistic regression analysis, sex, age and the size of the enterprises proved to be significant variables on the use of medical services for all three types of respiratory disease; The use of medical services increased with employee age. Women used more medical services than men and the employees in the large-scale enterprises used more services than employees in small-scale enterprises. However, exposure to dust or organic solvents did not affect medical service use due to total respiratory diseases or acute upper respiratory infections. Only in the case of chronic lower respiratory diseases did workers exposed to dusts(OR=1.12, 95% CI=1.01-1.24) or organic solvents(OR=1.19, 95% CI=1.05-1.35) use more medical services than those not exposed. Conclusions : Workers exposed to dusts or organic solvents are particularly apt to suffer from chronic lower respiratory diseases and use medical services more often than those not exposed. That is, chronic exposure to hazardous agents such as dusts and organic solvents is believed to be harmful and to cause respiratory symptoms and diseases.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.4
• /
• pp.215-221
• /
• 2011

Objectives: This study was conducted to evaluate the exposure level of hazardous chemical agents for dental technicians in Ulsan. Methods: We measured airborne total dusts and metals such as Nickel, Manganese, Cobalt, and Chromium in 10 dental laboratories by the NIOSH Methods 0500 and 7300, respectively. Methyl methacrylate (MMA), a key ingredient in acrylic resin, was also monitored using passive samplers for long-term sampling and Tenax tubes for short-term sampling. Results: Measured levels of all items were below 10% of the Korean exposure limit except for Nickel. The geometric mean concentration and geometric standard deviation of total dust, Nickel, and MMA were $0.14mg/m^3$ (2.16), $165.3{\mu}g/m^3$ (3.31), and 0.2 ppm (2.5) respectively. Airborne Nickel concentration of two dental laboratories exceeded the exposure limit ($1000{\mu}g/m^3$). The major emission sources of Nickel were metal trimming and casting processes. Conclusions: We found that Nickel, a carcinogen, should be controled most urgently to protect dental technicians.

• Safety and Health at Work
• /
• v.5 no.2
• /
• pp.43-52
• /
• 2014

Because information on biological agents in the workplace is lacking, biological hazard analyses at the workplace to securely recognize the harmful factors with biological basis are desperately needed. This review concentrates on literatures published after 2010 that attempted to detect biological hazards to humans, especially workers, and the efforts to protect them against these factors. It is important to improve the current understanding of the health hazards caused by biological factors at the workplace. In addition, this review briefly describes these factors and provides some examples of their adverse health effects. It also reviews risk assessments, protection with personal protective equipment, prevention with training of workers, regulations, as well as vaccinations.