• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.747-750
• /
• 1998

The application of spent liquor(BSL) obtained from alkaline sulfite-anthraquinone cooking of pine bark to cement mortar significantly improved the water-reducing ability and decreased the rate of cement hardening. However, the compressive and flexural strength of BSL addition to cement mortar were lower than that of PLAIN. The application of 0.2% antifoamer to BSL slightly decreased water-reducing ability, but remarkably improved the compressive and flexural strength of cement mortar. On the other hand, BSL decreased the rate of hardening of cement, which exhibited the protperties of the lignosulfonated based retarding water-reducing type. but the setting time of cement could be controlled by addition of Na2CO3 could be used to convert BSL to normal or accelerating concrete admixtures.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.1013-1018
• /
• 2009

Several rheological terms were introduced to estimate the properties of cooked noodles with different starch content using tensile tests. Ring-shaped specimens were prepared by connecting both ends of the noodle strip before cooking. Hencky strain and rate, as well as true stress were applied in constant deformation tests. The elastic region on the curves of strain vs. stress was not clearly identified. Strain hardening in the subsequent plastic region was more prominent in low-starch noodles. Elongational viscosities at lower strain rates were used to differentiate noodles with different starch content, representing the dominant effect of protein content in the range of lower strain rates. In stress relaxation tests, the reciprocal of Peleg's constant $K_1$ (initial decay rate) and $K_2$ (asymptotic level) increased and decreased respectively, with an increase in starch content. This indicated that addition of starch contributed to the noodles becoming viscous liquid rather than elastic solid.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.9-12
• /
• 2000

The importance of the role of plastic spin in the rate-dependent response of materials at large deformations is the main objective of this work. After a brief presentation of a general consitutive framework for visco-rigid plasticity at large strains an isotropic/kinematic hardening and a visco-rigid plastic model are used to analyze the stress-strain response under simple shear. A clear understanding of the role of plastic spin is achieved by obtaining numerical analyzed results for different stress values in which the plastic spin consititutive parameters interrelaste with the strain rate and other more conventional model constants, Especially this paper is concerned with introducing behaviors of Al7075

• 소성∙가공
• /
• 제22권8호
• /
• pp.450-455
• /
• 2013

In the current study, a new dynamic recrystallization model for predicting high temperature flow stress is developed based on a physical model and the mean field theory. In the model, the grain aggregate is assumed as a representative volume element to describe dynamic recrystallization. The flow stress and microstructure during dynamic recrystallization were calculated using three sub-models for work hardening, for nucleation and for growth. In the case of work hardening, a single parameter dislocation density model was used to calculate change of dislocation density and stress in the grains. For modeling nucleation, the nucleation criterion developed was based on the grain boundary bulge mechanism and a constant nucleation rate was assumed. Conventional rate theory was used for describing growth. The flow stress behavior of pure copper was investigated using the model and compared with experimental findings. Simulated results by cellular automata were used for validating the model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.115-116
• /
• 2011

This study aimed at establishing the fundamental data needed to evaluate the applicability and practicability in using a bamboo activated carbon as a construction material. The experiment on the flow of mortars mixed with a bamboo activated carbon before the hardening was carried out for the evaluation of basic properties. The compressive and bending strength of mortar mixed with bamboo activated carbon after the hardening was measured. the thermal conduction rate and density were also measured. An comparative analysis on mortars mixed with pine charcoals was conducted to compare it with exiting materials.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.9-18
• /
• 2021

The cutting force in a cutting simulation is determined by the cutting conditions, such as cutting speed, feed rate, and depth of cut. The cutting force changes, depending on the material and cutting conditions, and is affected by the heat generated during cutting. The physical properties for predicting the cutting force use constitutive equations as functions of the hardening term, rate-hardening term, and thermal-softening term. To accurately predict the thermal properties, it is necessary to accurately predict the thermal-softening coefficient. In this study, the thermal-softening coefficient was determined, and the cutting force was predicted, using the response-surface method with the cutting conditions and the thermal-softening coefficient as factors.

• Nuclear Engineering and Technology
• /
• 제10권2호
• /
• pp.73-78
• /
• 1978

온도 및 연신율변화 (strain-rate change)가 $\alpha$-uranium의 변형거동에 미치는 영향을 30$0^{\circ}C$에서 55$0^{\circ}C$까지 연구하였으며, strain rate sensitivity, activation volume, strain rate sensitivity exponent 및 dislocation velocity exponent을 조사하였다. 40$0^{\circ}C$이하에서 strain rate sensitivity exponent는 strain의 증가에 따라 증가하였으나 50$0^{\circ}C$이상에서는 strain의 증가에 따라 감소하는 경향을 나타냈다. 40$0^{\circ}C$이하에서는 strain에 의해 생기는 가공경화로 인한 내부 용력의 증가가 strain rate sensitivity exponent에 영향을 미치나 50$0^{\circ}C$이상에서는 많은 slip system이 변형에 기여하게 되므로 가공경화 보다는 thermal softening이 더 큰 영향을 미쳐서 strain rate sensitivity가 감소된다고 추측된다.

• 소성∙가공
• /
• 제9권1호
• /
• pp.72-79
• /
• 2000

Dynamic recrystallization (DRX), which may occur during hot deformation, is important for the microsturctural evolution of 304 stainless steel. Especially, the current interest in modelling hot rolling demands quantitative relationships among the thermomechanical process variables, such as strain, temperature, strain rate, and etc. Thus, this paper individually presents the relationships for flow stress and volume fraction of DRX as a function of processing variables using torsion tests. The hot torsion tests of 304 stainless steel were performed at the temperature range of 900~110$0^{\circ}C$ and the strain rate range of 5x10-2~5s-1 to study the high temperature softening behavior. For the exact prediction of flow stress, the equation was divided into two regions, the work hardening (WH) and dynamic recovery (DRV) region and the DRX region. Especially, The flow stress of DRX region could be expressed by using the volume fraction of DRX (XDRX). Since XDRX was consisted of the critical strain($\varepsilon$c) for initiation of dynamic recrystallization (DRX) and the strain for maximum softening rate ($\varepsilon$*), that were related with the evolution of microstructure. The calculated results predicted the flow stress and the microstructure of the alloy at any deformation conditions well.

• 한국건축시공학회지
• /
• 제15권3호
• /
• pp.265-271
• /
• 2015

본 연구는 재령 6시간에 압축강도 10MPa 이상을 만족하는 조강형 콘크리트를 개발함에 스팀양생 공정을 생략한 PC(Precast Concrete)부재를 생산하고자 하였으며, 거푸집의 회전율을 높임에 경제성을 확보하는데 목적이 있다. 이에, $C_3S$의 함유량이 높은 조강시멘트와 $C_3S$의 수화작용을 촉진시키는 분말형 경화촉진제를 사용하였으며, 경화촉진제 혼입율 0%, 1.2%, 1.6%, 2.0%에 따른 콘크리트의 특성을 평가하였다. 경화촉진제 혼입율에 따라 슬럼프 및 공기량 시험에는 큰 차이를 나타내지 않았으며, 1.6%이상을 혼입하였을 때, 재령 6시간에 10MPa를 만족하였다. 자기(건조)수축 길이변화 시험 및 소성수축 시험결과, 경화촉진제의 혼입으로 수화반응 속도에 따른 차이는 있지만, 균열 및 내구성에 대한 문제가 발생되지 않을 것으로 나타났으며, 동결융해 및 탄산화 침투에 대한 저항성도 우수한 것으로 나타났다.

• 한국건축시공학회지
• /
• 제13권4호
• /
• pp.407-415
• /
• 2013

본 연구에서는 초 조강 콘크리트 개발에 앞서서 본 연구에서 사용되는 경화촉진제에 대한 역학적 성능평가 및 미세분석을 통하여 시멘트 페이스트 내에서 경화촉진제의 성능을 검증하는 것이 목적이다. 따라서 상온양생 하에 $C_3S$를 다량 함유한 조강시멘트와 경화촉진제를 사용하는 콘크리트 재료기술에 초점을 맞추어 실험적인 연구를 수행하였다. 연구결과 경화촉진제는 시멘트와의 수화반응시 Ca이온의 포화도를 높여 초기에 $Ca(OH)_2$를 생성 시키는 것을 시차열 분석법으로 검정 하였다. 또한 $C_3S$의 수화생성물이 모세관 공극을 채워 공극률 또한 빠른 시간내에 감소되는 것을 확인 할 수 있었으며 미소수화열측정시험기로 실험을 한 결과 경화촉진제를 1, 3% 혼입하였을 경우에는 조강시멘트에 비해 1차 피크점이 사라지기 전 이미 2차 피크점을 향해 수화속도가 증가하는 것을 알 수 있었다. 이는 촉진제를 첨가함에 따라 시멘트성분 중 $C_3S$의 수화속도를 촉진 시킨 결과로 판단 할 수 있다. 수화 생성물을 육안으로 관찰하기 위해서 SEM찰영을 한 결과 촉진제의 첨가량에 따라 $Ca(OH)_2$의 생성과 재령에 따라 C-S-H의 형상을 관찰할 수 있었다. 따라서 본 연구에서 사용된 경화촉진제는 초기강도발현 시키는 것에 대해 효과적인 것을 확인 할 수 있었다.