• 원예과학기술지
• /
• 제35권1호
• /
• pp.1-10
• /
• 2017

본 연구는 기후변화에 대응한 마늘(Alliumsativum L.)의 생육 전반에 미치는 온도 스트레스의 영향을 밝히고 적합한 재배온도를 알아보기 위하여 주야간 온도를 달리한 SPAR 챔버 내에서 마늘을 재배하고 그 생육 특성과 광계II 활성, 수확기 인경 및 인편의 특성 등을 조사하였다. 온도처리 초기에는 온도가 높을수록 지상부 생육이 양호하였다. 그러나 수확기에는 $14/10-17/12^{\circ}C$에서 엽초경이 크게 감소하여, $14/10-17/12^{\circ}C$가 인경의 정상적인 발육에 적합함을 알 수 있었다. 수확기 인경 두께와 인경 길이는 $14/10-23/18^{\circ}C$에서 크게 발달하였으며, 인경의 중량은 $17/12-20/15^{\circ}C$에서 가장 무거웠다. 인경 당 인편 발생률도 $17/12-20/15^{\circ}C$에서 가장 높았으나, 인경 당 정상적인 인편 발생률은 그보다 낮은 $14/10-17/12^{\circ}C$에서 가장 양호하였다. 인편의 크기와 무게도 $14/10-17/12^{\circ}C$에서 재배하였을 때 가장 크고 무거웠다. 광계II의 최대 광화학적 효율($F_v/F_m$)과 잠재적 광합성능($F_v/F_o$)은 $14/10-20/15^{\circ}C$ 범위에서 가장 높았고 그 이상 또는 이하의 온도에서는 감소하여, $14/10-20/15^{\circ}C$의 온도 범위가 마늘의 생육에 우호적임을 알 수 있다. 그러나, $20/15^{\circ}C$ 이상의 온도에서는 잎줄기가 터지거나 마늘통이 갈라지거나 벌마늘을 형성하는 등의 이차생장 현상을 관찰할 수 있었다. 따라서, 이차생장 발생률을 낮추면서 상품성이 높은 마늘을 생산하기 위해서는 재배기간 동안 $14/10-17/12^{\circ}C$에서 재배하는 것이 바람직한 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1446-1455
• /
• 2000

Fatigue crack initiation and propagation behavior under cyclic biaxial loading has been investigated using thin-walled tubular specimen with a hole. Two types of biaxial loading system, i.e. cyclic tensile loading with super-imposed static torsional load and cyclic torsional loading with superimposed static tensile load, with various values of the biaxial loading ratio, $\tau$ s/ $\sigma$ max (or $\tau$ max/ $\sigma$s) were employed. Fatigue tests show that fatigue crack near the hole initiates and propagates at 900 and 450 direction to the longitudinal direction of the specimen under cyclic tensile and torsion loading with static biaxial stress, respectively, and the static biaxial stress doesn't have any great influence on fatigue crack initiation and growth direction. Stress analysis near the hole of the specimen shows that the crack around the hole initiates along the plane of maximum tangential stress range. Fatigue crack growth rates were evaluated as functions of equivalent stress intensity factor range, strain energy density factor range and crack tip opening displacement vector, respectively. It is shown that the biaxial mode fatigue crack growth rates can be relatively consistently predicted with these cyclic parameters.

• 한국식품영양학회지
• /
• 제19권4호
• /
• pp.352-357
• /
• 2006

Lactobacillus helveticus ATCC 55163을 MRS 및 6%, 12% 유청 배지와 각각에 효모 추출물을 1% 첨가한 유청 배지에서 배양하여 흡광도, pH, 총 산도 값을 측정하므로서 생육특성을 분석하였다. MRS 및 유청 배지에서의 대수기는 $3{\sim}21$시간으로 나타났고, 유청 배지에서의 pH는 $3{\sim}24$시간에 급격한 감소현상을, 총 산도 값은 이 시간대에 급격히 증가하는 반비례 현상을 보였다. 같은 시간대에 12% 유청 배지에 효모추출물을 1% 첨가하였을 때 다른 시험구보다 높은 생균수, 낮은 pH 값과 높은 총 산도 값을 보여 유청 농도와 효모 추출물이 균의 증식에 영향을 주었다.

• 대한기계학회논문집A
• /
• 제31권3호
• /
• pp.344-354
• /
• 2007

The objective of this study is to investigate the effect of arbitrarily located defect around the circular hole in the aircraft structural material such as Al/GFRP laminates and monolithic Al alloy sheet under cyclic bending moment. The fatigue behavior of these materials may be different due to the defect location. Material flaws in the from of pre-existing defects can severely affect the fatigue crack initiation and propagation behavior. The aim of this study is to evaluate effects of relative location of defects around the circular hole in monolithic Al alloy and Al/GFRP laminates under cyclic bending moment. The fatigue behavior i.e., the stress concentration factor($K_t$), the crack initiation life($N_i$), the relationship between crack length(a) and cycles(N), the relationship between crack growth rate(da/dN) and stress intensity factor range(${\Dalta}K$) near a circular hole are considered. Especially, the defects location at ${\theta}_1=0^{\circ}\;and\;{\theta}_2=30^{\circ}$ was strongly effective in stress concentration factor($K_t$) and crack initiation life($N_i$). The test results indicated the features of different fatigue crack propagation behavior and the different growing delamination shape according to each location of defect around the circular hole in Al/GFRP laminates.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.53-64
• /
• 1996

In this paper, rotating bending fatigue tests have been carried out to investigate the growth behabiors of surface fatigue crack initiated from a small artificial surface defect, that might exist in real structures, on 2024-T3 and 6:4 brass. The test results are analysed in the viewpoints of both strength of materials and fracture mechanics, it can be concluded as follows. The effect of a small artificial surface defect upon the fatigue strength is very large. The sensitivity of 2024-T3 on the defect is higher than that of 6:4 brass. The growth behavior of the surface fatigue crack of 2024-T3 is different from that of 6:4 brass. The growth rate of the surface fatigue crack of 2024-T3 is considerably rapid in the early stage of the fatigue life and apt to decrease in the later stage. It was impossible to establish a unifying approach in the analysis of crack growth begabior of 2024-T3 and 6:4 brass using the maximum stress intensity factor because of their dependence on stress level. But if the elastic strain and cyclic total strain intensity factor range were applied to obtain the growth rate of surface fatigue cracks of the materials, the data were found to be nearly coincided.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.8-13
• /
• 2013

Fatigue crack growth tests were conducted on urban railway wheel steel under mode I and mixed-mode conditions. Fatigue crack growth rates were evaluated in terms of equivalent stress intensity factor ranges, using both the extended and projected crack lengths. The equivalent stress intensity factor range with the growth rate results obtained under mode I loading conditions can be used to predict the crack growth rate under mixed-mode loading conditions. Extended crack length rather than projected crack length is appropriate for the prediction of the crack growth rate under the mixed-mode loading conditions.

• 유통과학연구
• /
• 제15권9호
• /
• pp.85-93
• /
• 2017

Purpose - The volume and valence of online word-of-mouth(eWOM) have become an important part of the retailer's market success for a wide range of products. This study aims to investigate how the growth of eWOM has generated the product's final financial outcomes in the introductory period influences. Research design, data, and methodology - This study uses weekly box office performance for 117 movies released in the South Korea from July 2015 to June 2016 using Korean Film Council(KOFIC) database. 292,371 posted online review messages were collected from NAVER movie review bulletin board. Using regression analysis, we test whether eWOM incurred during the opening week is valuable to explain the last of box office performance. Three major eWOM metrics were considered after controlling for the major distributional factors. Results - Results support that major eWOM variables play a significant role in box-office outcome prediction. Especially, the growth rate of the positive eWOM volume has a significant effect on the growth potential in sales. Conclusions - The findings highlight that the speed of eWOM growth has an informational value to understand the market reaction to a new product beyond valence and volume. Movie distributors need to take positive online eWOM growth into account to make optimal screen allocation decisions after release.

• 한국강구조학회 논문집
• /
• 제8권4호통권29호
• /
• pp.133-133
• /
• 1996

Application of the relationship $da/dN=C({\Delta}K)^{m}$ is effective in the analysis of fatigue crack growth life. The values of material constant C and m have great influences on the predicted fatigue life and the relationship between fatigue crack growth rate(da/dN) and stress intensity factor range(${\Delta}K$) is effective in fatigue crack growth behavior. In this paper, fatigue crack growth behavior of the welded joints in HT60 grade TMCP(Thermo Machanical Control Process) steel have been studied. To evalute the fatigue crack growth rates of HT60 grade TMCP steel, fatigue test was performed by base metal(BM), heat affected zone(HAZ) and weld metal(WM) in TMCP steel at room temperature. We determined the relationship of $da/dN-{\Delta}K$ by correlation between C and m obtained from the Paris-Erdogan power law data supplied HT60 grade TMCP steel. The obtained results from this study indicate that fatigue crack growth rate of TMCP steel is not influenced by softening effect which occurs in the HAZ when high heat input weld is carried out. Softening effects, which affect fatigue properties. are shown that it is not affected to the fatigue growth rates significantly.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1242-1251
• /
• 2018

Not all loads contribute to fatigue crack propagation in the welded detail of steel bridges when they are subjected to variable amplitude loading. For fatigue assessment, therefore, non-contributing stress cycles should be truncated. However, stress range truncation is not considered during typical fatigue reliability assessment. When applying the first order reliability method, stress range truncation occurs mismatch between the expected number of cycles to failure and the number of cycles obtained at the time of evaluation, because the expected number of cycles only counts the stress cycles that contribute to fatigue crack growth. Herein, we introduce a calibration factor to coordinate the expected number of cycles to failure to the equivalent value which includes both contributing and non-contributing stress cycles. The effectiveness of stress range truncation and the proposed calibration factor was validated via case studies.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.247-247
• /
• 2012

Gd-doped ZnO thin films were prepared with different growth temperatures by using a radio-frequency magnetron sputtering method. The deposited samples were characterized by using the X-ray diffractometer, the scanning electron microscopy, and the photoluminescence spectroscopy. All of the films show an average transmittance of about 85% in the wavelength range from 400 to 1100 nm.