• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.627-631
• /
• 2011

[ $[Li_{0.04}(Na_{0.54}K_{0.46})_{0.96}](Nb_{1-0.04-X}TaxSb_{0.04})O_3$ ]lead-free piezoelectric ceramics have been prepared by normal sintering at $1,100^{\circ}C$ for 5 h. X-ray diffraction analysis indicated that specimens demonstrate orthorhombic symmetry when $Ta\leq5$ mol%. While transforming into tetragonal symmetry when $x\geq20$ mol%. These suggest that the orthorhombic and tetragonal phases co-exist in the ceramics with 5 mol% $cm^3$. As the result of SEM images, the grain growth was decreased with the increase of Ta substitution. The ceramics become 'softening', leading to improvements in $k_p$, $\varepsilon_r$ and $d_{33}$, but a decrease in $Q_m$. Excellent properties of $k_p$= 0.46, $d_{33}$= 293 pC/N, ${\varepsilon}_r$= 1,583 and Tc= $340^{\circ}C$ were obtained when Ta= 15 mol%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.521-522
• /
• 2006

In this paper, hybrid air-water discharges were used to develop an optimal condition for providing a high level of water decomposition for hydrogen yield. Electrical and optical phenomena accompanying the discharges were investigated along with feeding gases, flow rates, and point-to-plane electrode gap distance. The primary focus of this experiment was put on the optical emission of the near UV range, with the energy threshold sufficient for water dissociation and excitation. The $OH(A^{2+},'=0\;X^2,"=0$) band's optical emission intensity indicated the presence of plasma chemical reactions involving hydrogen formation. In the gaseous atmosphere saturated with water vapor the OH(A-X) band intensity was relatively high compared to the liquid and transient phases although the optical emission strongly depended on the flow rate and type of feeding gas. In the gaseous phase discharge phenomenon for Ar carrier gas transformed into a gliding arc via the flow rate growth. OH(A-X) band's intensity increased according to the flow rate or residence time of He feeding gas. Reciprocal tendency was acquired for $N_2$ and Ar carrier gases. The peak value of OH(A-X) intensity was observed in the proximity of the water surface, however in the cases of Ar and $N_2$ with 0.5 SLM flow rate peaks shifted to the region below the water surface. Rotational temperature ($T_{rot}$) was estimated to be in the range of 900-3600 K, according to the carrier gas and flow rate, which corresponds to the arc-like-streamer discharge.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.852-857
• /
• 1996

Crystallization characteristics of titanium oxide thin film during post-annealing of reactive sputter deposition were studied. Amorphous phases of as-deposited films were crystallized into rutile after annealing at $900^{\circ}C$ and anatase at $500^{\circ}C$, respectively when $O_2$ concentration during sputtering was more than 15%. However, rutile was the only phase obtainable after annealing if %$O_2$ was less than 10%. For these films, Magneli phase($Ti_nO_{2n-1}$) were crystallized below $500^{\circ}C$ at first place due to slow oxidation of nonstoichiometric films but $500^{\circ}{\sim}600^{\circ}C$ anatase with nonstoichiometry was crystallized for a short period. It was, therefore, concluded that crystal growth can proceed without phase transition if stoichiometric phase is formed at the first stage of crystallization, and that rutile, the most stable phase, was resulted from any oxygen deficient nonstoichiometric films.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.874-879
• /
• 1995

Magnetic properties of FeMoN, FeMoTaN, FeTaN and FeTaC films deposited by DC magnetron reactive sputter were investigated, and correlated with their microstructure. FeMoN films were not showen the soft magnetic prop¬erties, because of generated $Fe_{2}Mo$, $Fe_{3-2}N$ and $Fe_{4}N$ phases. Ta added films, however, effectivly retarded the $\alpha$-Fe grain growth and suppressed the generation of Fe nitrides or carbides during heat treatement. The soft magnetic properties of $B_{s}:15\;kG,\;H_{e}:0.25\;Oe,\;\mu':4000(at\;5\;MHz),\;and\;B_s:14.5\;kG,\;He:0.25\;Oe,\;\mu':2700(5MHz)$ were observed in $Fe_{78.8} Ta_{8.5}N_{12.7}\;and\;Fe{75.6}Ta_{8.1}C_{16.3}$ films, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.2
• /
• pp.96-101
• /
• 2021

NaNbO₃:Eu³⁺ phosphor thin films were grown on quartz substrates by radio-frequency magnetron sputtering at a growth temperature of 100 ℃, with subsequent annealing at temperatures of 800, 900, and 1000 ℃. The effects of annealing temperature on the structural, morphological, and optical properties of the thin films were investigated. The NaNbO₃:Eu³⁺ sputtering target was synthesized by a solid-state reaction of raw materials Na₂CO₃, Nb₂O₅, and Eu₂O₃. The X-ray diffraction patterns exhibited that the thin films had two mixed phases of NaNbO₃ and Eu₂O₃. Surface morphologies were investigated by using field emission-scanning electron microscopy and indicated that the grains of the thin film annealed at 1000 ℃ showed irregular shapes with an average size of approximately 300 nm. The excitation spectra of Eu³⁺-doped NaNbO₃ thin film consisted of a strong charge transfer band centered at 304 nm in the range of 240-350 nm and two weak peaks at 395 and 462 nm, respectively, resulting from the ⁷F₀→⁵L₆ and ⁷F₀→⁵H₂ transitions of Eu³⁺ ions. The emission spectra under excitation at 304 nm exhibited an intense red band centered at 614 nm and two weak bands at 592 and 681 nm. As the annealing temperature increased from 800 ℃ to 1000 ℃, the intensities of all the emission bands and the band gap energies gradually increased. These results indicate that the higher annealing temperature enhance the luminescent properties of NaNbO₃:Eu³⁺ thin films.

• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.1-5
• /
• 2019

In this study, porous Mo-5 wt% Cu with unidirectionally aligned pores is prepared by freeze drying of camphene slurry with $MoO_3-CuO$ powders. Unidirectional freezing of camphene slurry with dispersion stability is conducted at $-25^{\circ}C$, and pores in the frozen specimens are generated by sublimation of the camphene crystals. The green bodies are hydrogen-reduced at $750^{\circ}C$ and sintered at $1000^{\circ}C$ for 1 h. X-ray diffraction analysis reveals that $MoO_3-CuO$ composite powders are completely converted to a Mo-and-Cu phase without any reaction phases by hydrogen reduction. The sintered bodies with the Mo-Cu phase show large and aligned parallel pores to the camphene growth direction as well as small pores in the internal walls of large pores. The pore size and porosity decrease with increasing composite powder content from 5 to 10 vol%. The change of pore characteristics is explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.

• Journal of Communication Design
• /
• v.62
• /
• pp.302-311
• /
• 2018

Fonts are digitized into a file and recognized as a intellectual property by the revision of the design protection act in 2005. Fonts are passed on to the users and are developed into design products. In this study, we have developed a model of font usage system as a design product based on Ahn Se Yoon's brand value system model. Based on the usage system model of the typeface, the lifecycle as a design product of the typeface was defined and analyzed as four different phases (introduction, growth, maturity, and decline.) In this study, To investigate the lifecycle of fonts, we selected the Gulim-chae which is most widely used as digital font files in Korea and are now in decline phase. Through this study, We hope that it will be useful for developing fonts, licensing system, and establishing brand strategies.

• International Journal of Knowledge Content Development & Technology
• /
• v.8 no.4
• /
• pp.33-53
• /
• 2018

Since business startups are known to have positive effects on the economic growth of a country, it is necessary to review the factors influencing the willingness to start new businesses for the people to act on business startups. In this regard, the study sought to reexamine the findings of previous research showing that the innovative, initiative, and risk-taking characteristics, which are the constitutive elements of entrepreneurships, influence the willingness to start up. Furthermore, in this study, attempts were made to empirically analyze the direct and indirect relationships of self-leadership influencing the willingness to start new businesses. Consequently, first, it showed that college students' entrepreneurship has positive effects on the willingness to start new businesses. Second, the significance of the gender of college students was not confirmed as to playing a regulating role in the relationship between entrepreneurship and the willingness to start up. Third, the relationship between self-leadership and the willingness to start new businesses was validated to be significant in a positive direction. Fourth, no mediating effect of self-leadership in the relationship between entrepreneurship and the willingness to start new businesses was observed. Such research results have the following significances. First, while there is an awareness that the concepts of business start- up, entrepreneurship, and leadership carry masculinity, the lack of regulating effect of gender may reflect the changing phases of time and society where women's participation has been increasing. Second, self-leadership is a concept by which one pioneers his or her own life and an influencing factor on the willingness to start up; however, since it has enormous impacts on the entrepreneurship and willingness to start up, relevant mediating effects were not observed and the magnitude of the important influence between entrepreneurship and the willingness to start up were confirmed.

• ALGAE
• /
• v.34 no.2
• /
• pp.71-90
• /
• 2019

A new encrusting red alga was found growing abundantly on glass debris items that drifted ashore along the coasts of Oregon and Washington. These included discarded fluorescent tubes, incandescent light bulbs, capped liquor bottles, and ball-shaped fishing-net floats. Field collections and unialgal cultures of the alga revealed that it consisted of two morphological phases: a young loosely aggregated turf and a mature consolidated mucilaginous crust. The turf phase consisted of a basal layer of globose cells that produced erect, rarely branched, uniseriate to multiseriate filaments up to $500{\mu}m$ long with closely spaced cells lacking pit-plugs. These filaments expanded in size from their bases to their tips and released single cells as spores. At maturity, a second phase of growth occurred that produced a consolidated crust, up to $370{\mu}m$ thick. It consisted of a basal layer of small, tightly appressed ellipsoidal-to-elongate cells that generated a mucilaginous perithallial matrix containing a second type of filament with irregularly spaced cells often undergoing binary division. At the matrix surface, the original filaments continued to grow and release spores but often also eroded. Individual cells, examined using confocal microscopy and SYBR Green staining, were found to contain a central nucleus, a single highly lobed peripheral chloroplast without a pyrenoid, and numerous chloroplast nucleoids. Morphological data from field and culture isolates and molecular data (rbcL, psbA, and SSU) show that this alga is a new genus and species which we name Viator vitreocola, "a traveller on glass."