Nursery pig building is imperative to provide environmental conditions favorable to maintenance of piglet health and the efficiency of growth rate. To meet the ultimate goal, it is necessary to apply proper ventilation design and construction to a confinement livestock building. This study was conducted to investigate the performance of a modified ventilation system in terms of devised slot-inlet (modification I) and exhaust fan (modification II) to improve air change rate in a confined nursery pig building, with dimension of 5.9 m(W) ${\times}$ 12.6 m(L) ${\times}$ 2.2 m(H) in an Darby Genetic Station. The experiment was carried out in August, especially when the outdoor peak temperature were above $30^{\circ}C$ and the measured indoor environmental factors were temperature, air velocity, humidity and ammonia concentration which have been known to affect the piglet health and growth. There was no difference in indoor temperature between the original and modified ventilation systems, however the air velocity and ammonia concentration in confined nursery pig building with modified ventilation system were, in most cases, better performance than original ventilation system. Therefore, it was concluded that the slot-inlet system that kept indoor environmental factors pertinent and had an economic advantage, should be considered as a ventilation system for decreasing sensible heat from piglet in confined nursery pig building during extreme summer season.
4-Hydroxynonenal (4-HNE) is a stable end product of lipid peroxidation, which has been shown to play an important role in cell signal transduction, while increasing cell growth and differentiation. 4-HNE could inhibit phosphatase and tensin homolog (PTEN) activity in hepatocytes and increased levels have been found in human invasive breast cancer. Here we report that 4-HNE increased the cell growth of breast cancer cells as revealed by colony formation assay. Moreover, vascular endothelial growth factor (VEGF) expression was elevated, while protein levels of hypoxia inducible factor 1 alpha (HIF-$1{\alpha}$) were up-regulated. Sirtuin-3 (SIRT3), a major mitochondria NAD+-dependent deacetylase, is reported to destabilize HIF-$1{\alpha}$. Here, 4-HNE could inhibit the deacetylase activity of SIRT3 by thiol-specific modification. We further demonstrated that the regulation by 4-HNE of levels of HIF-$1{\alpha}$ and VEGF depends on SIRT3. Consistent with this, 4-HNE could not increase the cell growth in SIRT3 knockdown breast cancer cells. Additionally, 4-HNE promoted angiogenesis and invasion of breast cancer cells in a SIRT3-dependent manner. In conclusion, we propose that 4-HNE promotes growth, invasion and angiogenesis of breast cancer cells through the SIRT3-HIF-$1{\alpha}$-VEGF axis.
The method of treatment in skeletal Class III malocclusion must be chosen according to an etiology and timing of the treatment. Maxillry protraction has been used as an effective treatment method in growing children with maxillary deficiency. The efficacy of maxillary protraction has been viewed as a result of downward-backward displacement of mandible and compensatory dental displacement during the treatment rather than forward -downward growth of maxilla itself. In this study, 104 subjects treated with maxllary protraction, and 19 males and 21 females with known annual growth amount have been chosen longitudinally as treated group and normal group, respectively. And changes in position of maxilla, mandible and dentition have been comparatively analyzed on the lateral cephalometric radiographs by age. The results were as follows : 1. Treated group showed more forward movement of maxilla compare to the normal group and the mandible displaced backward compare to the normal group. 2. Downward movement of maxilla in treated group was similar to that of normal group with statistical signigicance in female 12 year old group and downward movement of mandible in treated group was similar to that of normal group. 3. In treated group, maxillary central incisor moved more forward than the normal group with statistical significance in male 8, 10 year-old groups and female 8, 9, 10 year-old groups. In treated group, downward movement of maxillary central incisor was similar to that of the normal group with statistical significance in male and female 7,8 year-old groups. Considering the above results and the duration of the treatment, the forward movement of maxilla due to maxillary protraction was effective compared to normal growth amount of the normal group.
Single pulse of 2.0 to 3.5 kJ from $150{\mu}F$ capacitor was applied to the cp Ti rod for its surface modification and heat treatment. Under the conditions of using 2.0 and 2.5 kJ of input energy, no phase transformation has been occurred. However, the hardness and tensile strength decreased and the elongation increased after a discharge due to a slight grain growth. By using more than 3.0 kJ of input energy, the electro discharge made a phase transformation and the hardness at the edge of the cross section increased significantly. The Ti rod before a discharge was lightly oxidized and was primarily in the form of $TiO_2$. However, the surface of the Ti rod has been instantaneously modified by a discharge into the main form of TiN from $TiO_2$. Therefore, the electro discharge can modify its surface chemistry in times as short as $200{\mu}sec$ by manipulating the input energy, capacitance, and discharging environment.
The purpose of this study is to suggest objective basic data for the apartment interior landscape project through the quantitative analysis of the apartment residents' satisfaction on the apartment interior landscape. 1. The major variables related to the interior landscape expert's satisfaction were the interest of the broadcasting of the interior landscape, garden belong to oneself, the intention of the modification of the apartment framework for the interior plantscape, the illumination for the indoor Plants, the season feeling through the int erior plantscape, the psychological effect of the indoor plants, income, the apartment framework and interior plants, the experience and knowledge about the indoor plants, floor space, utilizing veranda as a garden. 2. The major variables related to the general residents' satisfaction included the experience and knowledge on the indoor plants, veranda space, the season feeling through the interior plantscape, the illumination for the interior plants, the interest of the broadcasting of the interior landscape, the intention of the modification of the apartment framework for the interior plantscape. 3. According to the multiple regression analysis, the 'R2'of the major variables related to the experts' satisfaction has been obtained as 75.55%, and that of the varibles related to the general residents' satisfaction, 23.49 %. 4. Such variables as the season feeling through the interior plantscape, the Interest of the broadcasting of the interior landscape, and the intention of the modification of the apartment framework for the interior plantscape for the exports and the general residents are supposed that we develope new interior plants as well as the interior plantscape for the growth of the plants regarding the apartment framework. 5. The interior landscape experts were more positive than the general residents in using the interior landscape materials including indoor plants. 6. The feelings about building layout and the satisfaction in exterior spaces expended the interior landscape, visually, were reasons for the satisfaction of the apartment interior landscape.
The effects of minor additives on the casting properties of AC4A aluminum alloys were investigated. Measurements of the cooling curve and microstructure observations were conducted to analyze the effects of Ti-B and Sr minor elements during the solidification process. A fine grain size and an increase in the crystallization temperature for the ${\alpha}-Al$ solution were evident after the addition of 0.1wt% Al-5%Ti-1%B additive. The modification effect of the eutectic $Mg_2Si$ phase with the addition of 0.05% Al-10%Sr additive was prominent. A fine eutectic $Mg_2Si$ phase and a decrease in the growth temperature of the eutectic $Mg_2Si$ phase were evident. Fluidity, shrinkage and solidification-cracking tests were conducted to evaluate the castability of the alloy. The combined addition of Al-5%Ti-1%B and Al-10%Sr additives showed the maximum filling length owing to the effect of the fine ${\alpha}-Al$ grains. The macro-shrinkage ratio increased, while the micro-shrinkage ratio decreased with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives. The macro-shrinkage ratio was nearly identical, while the micro-shrinkage ratio increased with the addition of the Al-10%Sr additive. The tendency of the occurrence of solidification cracking decreased owing to the effect of the fine ${\alpha}-Al$ grains and the modification of the $Mg_2Si$ phase with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives.
Biomaterials are frequently functionalized with Arg-Gly-Asp (RGD) peptides to provide cell adhesion sites. In this study, RGD peptides were enzymatically coupled on to the surface of fibroin microspheres. Papain exhibited a strong preference for dansyl phenylalanine for the peptide formation with fibroin microspheres. Thus, RGD1 peptide was designed to carry cysteine to both sides of the sequence, glycine as a spacer and two residues of phenylalanine at the C-terminal (CRGDCGFF). The enzymatic modification facilitated by an increasing amount of substrate and by the presence of organic solvent, dimethylsulfoxide at 25% (v/v). Microspheres coupled with RGD1, showed a significantly different precipitation property and an increased apparent volume, possibly due to the steric hindrance of RGD peptides on the surface. Transmission electron microscopy also confirmed the presence of cysteine residues in RGD1 coupled on the surface of microspheres stained with gold nanoparticles. RGD1-microspheres significantly facilitated the growth of murine fibroblast 3T3 cells even under non-adhesion culture conditions.
Foreign proteins, $endo-{\beta}-1,4-glucanase$ of Bacillus subtilis, preS1+S2 region of hepatitis B virus large surface antigen, human ${\beta}_2-adrenergic$ receptor ($h{\beta}_{2}AR$), and bovine growth hormone (bGH) were expressed in Saccharomyces cerevisiae and secreted into the medium. These proteins were expressed using the alcohol dehydrogenase I (ADH1) promoter of Saccharomyces cerevisiae and secreted by signal sequence of the 97 K killer toxin gene of doublestranded linear DNA plasmid (pGKL1) of S. cerevisiae. All these proteins underwent severe modifications; in particular, N-glycosylation in the case of $endo-{\beta}-1,4-glucanase$, $h{\beta}_2AR$, and preS1+S2. Seventy four percent of the expressed $endo-{\beta}-1,4-glucanase$ was secreted into the culture medium. Highly modified proteins were detected in the culture medium and in the cell. Expressed $h{\beta}_2AR$, which has seven transmembrane domains, remained in the cell. The degrees of secretion and modification and the states of proteins in the culture medium and in the cell were quite different. These results indicated that the nature of the protein has a critical role in its secretion and modifications.
Surface modification is a type of mechanical manipulation skills to achieve extensive aims including corrosion control, exterior appearance, abrasion resistance, electrical insulation and electrical conductivity of substrate materials by generating a protective surface using electrical, physical and chemical treatment on the surface of parts made from metallic materials. Such surface modification includes plating, anodizing, chemical conversion treatment, painting, lining, coating and surface hardening; this study conducted cavitation experiment to assess improvement of durability using anodizing. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant speed. In addition, using galvanostatic method, it was maintained at processing time of 40minutes for 10 to $30mA/cm^2$. The cavitation experiment was carried out with an ultra sonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1mm. The specimen after the experiment was cleaned in an ultrasonic bath, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the study, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with the anodizing process time.
In budding yeast, G2/M transition is tightly correlated with bud morphogenesis regulated by Swel and septin that plays as a scaffold to recruits protein components. BNI5 isolated as a suppressor for septin defect is implicated in septin organization and cytokinesis. The mechanism by which Bni5 regulates normal septin function is not completely understood. Here, we show that Bni5 phosphorylation is required for mitotic entry regulated by Swel pathway. Bni5 modification was evident from late mitosis to G1 phase, and CIP treatment in vitro of affinity-purified Bni5 removed the modification, indicative of phosphorylation on Bni5. The phosphorylation-deficient mutant of BNI5 (bni5-4A) was defective in both growth at semi-restrictive temperature and suppression of septin defect. Loss of Bni5 phosphorylation resulted in abnormal bud morphology and cell cycle delay at G2 phase, as evidenced by the formation of elongated cells with multinuclei. However, deletion of Swel completely eliminated the elongated-bud phenotypes of both bni5 deletion and bni5-4A mutants. These results suggest that the bud morphogenesis and mitotic entry are positively regulated by phosphorylation-dependent function of Bni5 which is under the control of Swel morphogenesis pathway.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.