• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.38-46
• /
• 1996

High temperature low cycle fatigue crack growth behavior is investigated over a range of two temperatures and various frequencies in SUS 304 stainless steel. It is found that low frequency and temperature can enhance time-dependent crack growth. With high temperature, low frequency and long crack length, ${\Delta}J_c/{\Delta}J_ f$, the ratio of creep J integral range to fatigue J integral range is increased and time-dependent crack growth is accelerated. Interaction between ${\Delta}J_f$ and ${\Delta}J_c$ is occured at high frequency and low temparature and ${\Delta}J_c$, creep J integral range is fracture mechanical parameter on transition from cycle-dependent to time dependent crack growth in creep temperature region.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.98-111
• /
• 1995

High temperature low cycle fatigue shows that cycle-dependent crack growth owing to cyclic plastic deformation occurred simultaneosly with time-dependent crack growth owing to intergranular deformation. Consequently, to estimate crack growth rate uniquely, many to investigators have proposed various kinds of parameters and theories but these could not produce satisfactory results. Therefore the goal of this study is focused on prediction of crack growth rate using predominant damage rule, linear cumulative damage rule and transitional parameter ${\Delta}J_c/{\Delta}J_f$. On the basis of these sinusoidal loading waveform at 600$^{\circ}C$ and 700$^{\circ}C$.

• 대한조선학회지
• /
• 제23권3호
• /
• pp.17-26
• /
• 1986

A new relationship between total acoustic emission counts per cycle and crack growth rate is derived in terms of stress intensity factor to explain the acoustic emission behavior due to fatigue crack growth. The experimental results of the total acoustic emission counts per cycle obtained from aluminium 5,000 series alloy specimens are compared with the theoretical values. Both experimental and theoretical total acoustic emission counts per cycle result in the linear relationship to the crack length.

• 기술혁신학회지
• /
• 제5권2호
• /
• pp.129-140
• /
• 2002

This study is try to do the empirical tests on the relationship among innovation cycle, investment cycle, and business cycle suggested in recent economic growth models. We apply co-spectra analysis to estimate dynamic correlations in the extraction HP filtered variables and first difference filtered variables in our data set. Our empirical results are; (i) an existing asynchronization between innovation cycle and investment cycle, (ii) in the long frequency, an existing positive correlation between innovation cycle and business cycle, (iii) in the short frequency, however, a finding the high negative correlation between the two cycle. Our empirical findings support the recent growth through cycle models and suggest some economic policy implementations for economic stabilization during a severe business cycle.

• 한국프랜차이즈경영연구
• /
• 제12권2호
• /
• pp.23-33
• /
• 2021

Purpose: The purpose of this study is to provide basic data such as development of sustainable support policies and performance management evaluation to support sustainable management of domestic franchises by deriving the sustainable growth cycle of domestic franchises. Research design, data, and methodology: This study is based on systematic review study. We combined search terms such as "Start-up", "Sustainability" and "Success" with four databases, RISS, KISS, e-article and DBpia and searched a total of 1,219 articles published by April 21, 2021. In the process, 35 studies were selected and analyzed after an expert review, excluding documents whose overlapping documents, gray zones (e.g., reports, conference presentations, etc.), degree papers, foreign language literature, and dependent variables were not related to the Sustainability factors. Using ERIS model, which is applied to research on the results of startup, and the franchise's growth cycle, which reflects the growth stage of franchises, we analyzed the factors behind the sustainability of franchise. Result: The results of the study are as follows. First, research on the sustainability of franchise has continued since 2009 in Korea, and has been conducted in various fields such as social welfare in addition to venture, start-up and management. Second, sustainability factors of franchise were analyzed from the ERIS performance model indicating the performance of venture, and the 68 subfactors were derived. Third, it is confirmed that there are important factors that affect the sustainable growth of franchise startups in each franchise's growth cycle. Conclusions: It is significant that through this study, we provided better understanding of the factors that sustain sustainability of franchises, policy suggestions, and presented the direction of future study. Theoretical suggestion is that the main reason for the continuous growth of franchise in each domestic franchise is based on the ERIS performance model. The practical implication is that the headquarters and Franchisor can use it to establish and evaluate performance indicators based on the business growth cycle. The results of this study are expected to be used as basic data for development and performance management evaluation of franchise start-up support policies to support the sustainable management of domestic franchises.

• 한국전자통신학회논문지
• /
• 제8권5호
• /
• pp.745-750
• /
• 2013

최근 수행된 많은 연구에서 시설 하우스나 식물 공장과 같이 실용적인 원예 시설에 대한 환경 제어 시스템이 다양하게 제시되었다. 그러나 아직까지도 식물의 전 생장 과정에 따른 온 습도 등 제어가 제대로 되지 않아 성장 장해 및 병충해에 노출되어 농가의 적지 않은 피해가 보고되고 있다. 공기 순환팬, 산업용 제습기 등을 활용하여 대책을 마련해 보고 있지만, 기대에 미치지 못하고 있다. 본 논문에서는 주기별 생장 인식 알고리즘을 이용하여 각 식물의 성장 단계를 인식하고 식물의 성장 단계에 따른 최적의 환경을 제공한다. 주기별 식물 생장 인식 자동 제어 모니터링 시스템을 이용하면 식물의 생장에 필요한 최적 환경을 제공하므로 생산성을 높일 수 있다.

• 한국식품영양학회지
• /
• 제25권1호
• /
• pp.205-213
• /
• 2012

This study investigated the life cycle of menus and made suggestions on the appropriate time for when new menus should be developed. For this purpose, a total of 636 customers who visited 'T' Restaurant more than 25 times in the past three years were used for analysis. After estimating product life cycles based on sales and selling period, an empirical study was conducted. In terms of product life cycle, a growth stage was observed in the category of pasta and pizza in both stores A and B, whereas sales in the rice category stayed constant. Regarding trend in seasonal sales, a big difference was detected between the two stores. While store A was already in the decline stage of the life cycle in all menu categories, store B remained in the growth stage. In terms of menu life cycle, the product life cycle of long-lived products was observed in the pasta category in both stores A and B. While the pizza category was in the growth stage, the product life cycle of long-lived products was observed in the rice category. It is expected that the results of this study could be useful in development of new menus and product life cycle management to fulfill diverse customer needs in the dining-out business.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.548-554
• /
• 1994

The high temperature fatigue crack growth behavior of SUS 304 stainless steel at $550^{\circ}C$ and $650^{\circ}C$ was investigated under various kinds of stress ratio and frequency in sinusoidal waveform on the basis of the non-linear fracture mechanics. The result arranging crack growth rate by modified J-integral J' showed influence of stress ratio and frequency. All the data obtained under the test at $550^{\circ}C$ were plotted within data band of da/dN-${\triangle}J_f$ relationship for cycle-dependent crack growth. On the basis of static creep and cycle-dependent data band; both time- and cycle-dependent crack growth behavior was observed under loading conditions at $650^{\circ}C$, but cycle-dependent crack growth behavior predominantly appeared and time-dependent crack growth behaviour was little observed under loading conditions at $550^{\circ}C$. Fractographic examinations for fracture surface indicated that the fracture mode was generally transgranular. The stripes were found on fracture surface and each stripe was accompanied by a crack tip blunting and an abrupt increase in the load-point displacement. The $J'_{an}$ had a validity in case of $650^{\circ}C, but scarcely had it in case of $550^{\circ}C$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권6호
• /
• pp.349-353
• /
• 2003

The physiological characteristics of cultures of very high cell mass (e.g. 10g cell mass/L), termed“ultrahigh cell density cultures”is reviewed. A close relationship was found between the length of the optical path (OP) in flat-plate reactors and the optimal cell density of the culture as well as its areal (g m$\^$-2/ day$\^$-1/) productivity. Cell-growth inhibition (GI) unfolds as culture density surpasses a certain threshold. If it is constantly relieved, a 1.0cm OP reactor could produce ca. 50% more than reactors with longer OP, e.g. 5 or 10cm. This unique effect, discovered by Hu et al. [3], is explained in terms of the relationships between the frequency of the light-dark cycle (L-D cycle), cells undergo in their travel between the light and dark volumes in the reactor, and the turnover time of the photosynthetic center (PC). In long OP reactors (5cm and above) the L-D cycle time may be orders of magnitude longer than the PC turnover time, resulting in a light regime in which the cells are exposed along the L-D cycle, to long, wasteful dark periods. In contrast, in reactors with an OP of ca. 1.0 cm, the L-D cycle frequency approaches the PC turnover time resulting in a significant reduction of the wasteful dark exposure time, thereby inducing a surge in photosynthetic efficiency. Presently, the major difficulty in mass cultivation of ultrahigh-density culture (UHDC) concerns cell growth inhibition in the culture, the exact nature of which is awaiting detailed investigation.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.96-104
• /
• 1992

Aircraft structures and engineering structures are always subject to variable amplitude loads. Variable amplitude loads include some kind of loading history; for example, constant amplitude load, single peak overload and block overload etc. Crack growth under variable amplitude loading exhibits retardation effect. In this study, the 4 point bending fatigue test was performed by hydrolic servo fatigue testing machine on 7075-T6 Al-alloy. The retardation effect of overload ratio and numbers of overload cycle was quantitatively studied. 1) Change of retardation effect against increment of overload ratio is more evident when the multiple overload is applied than single overload is done. 2) The number of overload cycle is very important factor about the crack growth retardation effect when the overload ratio is more than 1.75; that is not when the overload ratio is less than 1.75. 3) Overload affected zone size increased gradually by increment of crack growth retardation effect. 4) Crack driving force is more greatly reduced when the crack tip branched off two direction than it sloped to one direction.