• 제목/요약/키워드: growth and distortion

검색결과 104건 처리시간 0.026초

응력제거 열처리 공정조건이 적층제조한 Ti-6Al-4V 합금의 잔류응력 및 경도에 미치는 영향 (Effect of stress relief heat treatment on the residual stress and hardness of additively manufactured Ti-6Al-4V alloy)

  • 송영환
    • 한국결정성장학회지
    • /
    • 제33권6호
    • /
    • pp.282-287
    • /
    • 2023
  • 본 연구에서는 Laser Powder bed fusion(L-PBF) 공정을 사용하여 제작된 Ti-6Al-4V 합금 적층성형품의 응력제거 열처리 온도와 시간의 변화에 따른 미세조직, 잔류응력 그리고 경도의 변화를 연구하였다. 잔류응력 제거를 위한 열처리 시험 결과 823 K에서는 240분, 873K에서는 60분 이상 열처리시 치수변화 및 기계적 특성 저하를 야기하는 결정립 성장 및 상변화 발생 없이 대부분의 잔류응력이 3 0 MPa 이하로 감소되는 것을 확인하였다. 또한, 열처리 온도 및 시간의 증가와 함께 경도가 증가하는 경향을 보였다. 이러한 결과는 XRD 및 SEM-EBDS의 phase map 분석을 통해 확인되지 않지만, 773~873 K 온도범위에서 등온 열처리시 국부적인 침상 Martensitic α' 상의 미세화가 원인으로 추정된다.

임상가를 위한 특집 4 - 안면비대칭의 외과적 교정 (Facial asymmetry: Critical element of clinical successful treatment)

  • 홍종락
    • 대한치과의사협회지
    • /
    • 제52권10호
    • /
    • pp.623-632
    • /
    • 2014
  • 안면비대칭의 주원인은 하악골이며, 하악골의 비대칭 성장에 대한 상악골의 보상성장에 따라 교합면 경사 등이 초래된다. 디지털 사진과 삼차원 CT 등 다양한 방법으로 정확한 진단을 하고 수술을 포함한 치료계획을 세운다. 술전 교정 치료는 상악골과 하악골 치열의 치성 보상(dental compensation)을 제거하면서 상악 치열의 중심은 상악골의 정중선에, 하악 치열의 중심은 하악골 정중선에 맞게 이동하여 술후 상하악 치열궁이 일치하면서 동시에 안모 정중선에 일치하게 맞추어야 한다. 악교정 수술은 일반적으로 상하악 동시 수술을 하게 되며 우각부 풍융도 교정과 이부 성형술(genioplasty) 등을 부가적으로 할 수 있으며, 교합면 경사 교정과 수평 회전 등의 이동이 상하악 위치에 서로 영향을 주면서 수술 후 안모 변화에 대한 예측을 어렵게 만들기 때문에, 다양한 분석을 통해 정확한 예측으로 최선의 결과를 얻는 것이 가장 중요하다.

Crystal Structure and Physical Property of Tetragonal-like Epitaxial Bismuth Ferrites Film

  • Nam, Joong-Hee;Biegalski, Michael;Christen, Hans M.;Kim, Byung-Ik
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
    • /
    • pp.7-8
    • /
    • 2011
  • Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

  • PDF

Aluminium이 팥(Vigna angularis) 유식물의 생장, 엽록소함량, ALAD활성 및 뿌리와 경엽부의 형태에 미치는 영향 (Effects of Aluminium on Growth, Chlorophyll Content, ALAD Activity and Anatomy of Root rind Shoot in Azuki Bean (Vigna angularis) Seedlings)

  • 구서영;홍정희
    • 한국환경과학회지
    • /
    • 제5권6호
    • /
    • pp.813-826
    • /
    • 1996
  • 발아후 7일된 팥유식물에서 alumlnlum(Al)이 생장, 엽록소 함량, ALAD활성 및 뿌리와 경엽부의 형태에 미치는 영향을 조사하였다. 저농도(50, 100 $\muM)의$ Al처리에 의해 뿌리와 경엽부의 신장이 매우 감소되었으며 농도가 증가함에 따라 생장이 더욱 억제되었다. 따라서 생장억제는 농도의존적이었다. 뿌리신장은 Al 처리 24시간에서 감소되었으며 7일간의 저농도처리에 의해 억제효과가 회복되는 경향을 보여주었다. Al의 독성증상과 생장반응은 경엽부에 비해 뿌리에서 더 크게 나타났다. Hematoxylin 염색법에 의해 Al 분포를 조사한 결과 Al은 근단을 통해 표피와 피층세포에 축적되어 있음을 알 수 있었다. 한편 Al처리는 엽록소함량을 감소시켰으며, ALAD활성 또한 억제시켰다. 엽록소 함량과 ALAD 활성 간에는 양의 상관관계가 나타났다. Al 처리에 의한 뿌리의 형태변화를 보면 표피세포 및 피층세포의 변형 또는 파괴가 관찰되었으며, 뿌리직경과 피층의 체적도 매우 감소되었다. 경엽부에서도 Al처리는 직경과 세포크기의 감소를 보여주었다. 그러나 잎에서의 형태적 변화는 엽록체수와 크기변화 이외에는 거의 관찰되지 않았다. 이와 같은 결과에서 Al의 독성효과는 1차적으로 뿌리에서 나타나며, 뿌리형태의 변화는 뿌리의 생장패턴과 관련이 있음을 알 수 있었다. 따라서 Al은 팥유식물에서 특히 뿌리의 형태와 기능적 손상을 일으키는데 큰 영향을 미치는 것으로 생각된다.

  • PDF

$Mn_xCd{1-x}Ga_2Se_4(0 {\leq}X {\leq}1)$ 반자성 반도체의 결정성장과 구조특성 연구 (Crystal Growth and Structural Properties of$Mn_xCd{1-x}Ga_2Se_4(0 {\leq}X {\leq}1)$ Semimagnetic Semiconductors)

  • 신동호;정해문;김창대;김화택
    • 한국진공학회지
    • /
    • 제1권3호
    • /
    • pp.346-352
    • /
    • 1992
  • 반자성 반도체인 MnxCd1-xGa2Se4의 단결정을 조성비 ( $0leq$ $X \leq$ 1) 영역에서 TVTP(time-varying temperature profile)에 의한 화학수송법으로 성장하였다. 성장된 단결정 은 자연면을 갖은 경면으로 성장되었으며, X = 1.0 경우인 단결정의 크기는 12 $\times$ 6 $\times$ 1.5mm3이었다. MnxCd1-xGa2Se4의 결정구조는 defect chalcopyrite 구조이었으며, 조성비 X 가 증가함에 따라 격자상수 a는 선형적으로 감소하고, 격자상수 c는 증가하였다. 또한 distortion factor 2-(c/a)는 감소하였다.

  • PDF

Sol-Gel 법에 의한 LiMn$_2$O$_4$의 합성 및 리튬이차전지용 전극물질로의 특성 (The Synthesis of LiMn$_2$O$_4$by sol-gel method and properties as electrode materials for lithium secondary battery)

  • 이진식;박용성;우제완
    • 한국결정성장학회지
    • /
    • 제10권3호
    • /
    • pp.219-225
    • /
    • 2000
  • 스피넬형의 $LiMn_2$O$_4$는 출발물질로 LiOH와 Mn($CH_3$COO)$_2$.$4H_2$O를 사용하여 졸-겔법으로 합성한 xerogel을 $150^{\circ}C$로 1차 열처리한 후 $350^{\circ}C$로 2차 열처리하여 합성하였다. 그러나 $350^{\circ}C$ 이상으로 열처리할 경우 $Mn_2O_3$가 생겼으며, 이로 인해서 Li/lM $LiClO_4$(in PC)$LiMn_2O_4$cell을 구성하여 0.25 mA/$\textrm{cm}^2$의 전류밀도로 충.방전 실험을 한 결과 $350^{\circ}C$에서 열처리한 것은 15 cycle후에 88 mAh/g에서 56 mAh/g으로 35.7%의 용량감소가 나타났으나 $500^{\circ}C$에서 열처리한 것은 89 mAh/g에 51 mAh/g으로 42.5%의 용량감소가 나타났으며 이는 $Mn^{3+}$ 의 증가로 인한 Jahn-Teller distortion의 결과로 볼 수 있다.

  • PDF

국가발전과 지역균형발전에 관한 연구 - 경제성장과 지역균형발전의 상관관계를 중심으로 - (A Study on National Development & Balanced Development by Region - Mainly Interrelation between Economic growth and Balanced Regional Development -)

  • 김남일
    • 한국컴퓨터정보학회논문지
    • /
    • 제10권2호
    • /
    • pp.205-213
    • /
    • 2005
  • 지역균형발전이란 지역간 경제적 생산성 및 소득의 격차를 줄이고 국민들이 어느 지역에서나 비슷한 수준의 소득으로 비슷한 생활수준을 누릴 수 있게 한다는 점에서 경제적, 사회적으로 큰 의미를 가진다 그러나 우리나라는 지난 30여년동안 고도경제성장 위주의 국가경제 정책과 정치, 사회의 구조적 요인으로 인하여 서울을 중심으로 한 수도권 지역으로의 경제력 및 개발이 편중되면서 지역간 불균형 성장이 야기되어 국가발전에 커다란 장애요인으로 대두되었다 특히 지역간 불균형성장은 국민경제의 효율적인 자원배분을 왜곡시키고 특정지역주민들의 소외의식을 야기하였으며 이로 인해 사회적, 정치적 문제로 항상 비화되어 국민통합을 저해하는 사회적 갈등을 심화 시켰다 따라서 본 연구의 주된 내용은 국가발전의 개념을 구성하는 경제성장과 지역균형발전 관계를 규명하는데 있으며, 연구를 구체화하기 위한 분석의 대상을 경제성장과 지역간 인구 및 생활 편의시설의 변화 추이를 통한 지역간 인구격차 분석과 지역간 생활편익시설의 격차 등을 분석대상으로 삼았다. 분석을 위한 공간적 범위는 대한민국 국토 전역을 대상으로 삼았으며. 연구의 시간적 범위는 경제개발 5개년 계획을 추진하였던 1962년부터 지역균형개발을 실시하였던 2001년까지 10년 단위를 설정하였다.

  • PDF

표고 담자포자 유래 단핵균사의 A 교배형과 생장 속도 상관관계 (Correlation of A Mating Type with Mycelial Growth Rate in Basidiospore-derived Monokaryons of Lentinula edodes)

  • 박미정;유림;장영선;가강현
    • 한국균학회지
    • /
    • 제49권4호
    • /
    • pp.487-495
    • /
    • 2021
  • 표고는 사극성의 교배계를 갖는 담자균의 일종으로, 표고의 교배형은 A와 B라 불리는 서로 독립된 두 유전자좌에 의해 결정된다. 이론적으로 하나의 이핵균주는 네 개의 서로 다른 교배형을 갖는 담자포자를 1:1:1:1의 비율로 만들 수 있다. 과거 연구 결과에 따르면, 표고 담자포자에서 교배형이 편향된 분리비로 나타남이 보고되었다. 하지만 이러한 결과들은 꺽쇠연결과 같은 형태학적 특성만을 기반으로 교배형을 결정했다는 한계가 있다. 이에 본 연구에서는 교배형의 편향된 분리비가 표고에서 일반적인 현상인지 보다 명확하게 알아보기 위해서 최근에 보고된 DNA 마커를 활용하여 세 가지 표고 품종들의 담자포자에 대한 교배형 분석을 수행하였다. 그 결과 교배형의 편향된 분리비가 과거 보고와 일치하게 균주 특이적인 특성임을 확인하였다. 분석한 세 품종 중 한 품종을 제외하고 나머지 두 품종에서 편향된 분리비가 관찰된 것이다. 다음으로는 각 담자포자 유래 단핵균사들의 생장 속도와 교배형의 상관관계를 분석하였다. 그 결과 표고 단핵균사의 생장 속도는 B 교배형과는 관계가 없고, A 교배형과 관계가 있음을 확인하였다. 따라서 A 교배형 유전자좌에 존재하는 호메오도메인 전사인자 혹은 A 교배형 유전자좌와 연관된 유전자들이 단핵균사의 생장에 영향을 줄 것으로 보인다. 버섯 신품종 육성에서 교배형의 중요성을 고려할 때, 본 연구는 효율적인 신품종 육성 전략을 세우거나 단핵균사 생장 기작을 이해하는 데 도움을 줄 것으로 기대된다.

비납계 (Na,K)NbO3-M(Cu,Nb)O3, (M = Ca, Sr, Ba) 압전 세라믹의 비정상 결정 성장 거동 비교 (Comparison of Abnormal Grain Growth Behavior of Lead-Free (Na,K)NbO3-M(Cu,Nb)O3, (M = Ca, Sr, Ba) Piezoelectric Ceramics)

  • 정승운;임지호;정한보;지성엽;최승곤;정대용
    • 한국재료학회지
    • /
    • 제30권7호
    • /
    • pp.343-349
    • /
    • 2020
  • NKN [(Na,K)NbO3] is a candidate lead-free piezoelectric material to replace PZT [Pb(Zr,Ti)O3]. A single crystal has excellent piezoelectric-properties and its properties are dependent of the crystal orientation direction. However, it is hard to fabricate a single crystal with stoichiometrically stable composition due to volatilization of sodium during the growth process. To solve this problem, a solid solution composition is designed (Na,K)NbO3-Ba(Cu,Nb)O3 and solid state grain growth is studied for a sizable single crystal. Ceramic powders of (Na,K)NbO3-M(Cu,Nb)O3 (M = Ca, Sr, Ba) are synthesized and grain growth behavior is investigated for different temperatures and times. Average normal grain sizes of individual specimens, which are heat-treated at 1,125 ℃ for 10 h, are 6.9, 2.8, and 1.6 ㎛ for M = Ca, Sr, and Ba, respectively. Depending on M, the distortion of NKN structure can be altered. XRD results show that (NKN-CaCuN: shrunken orthorhombic; NKN-SrCuN: orthorhombic; NKN-BaCuN: cubic). For the sample heat-treated at 1,125 ℃ for 10 h, the maximum grain sizes of individual specimens are measured as 40, 5, and 4,000 ㎛ for M = Ca, Sr, and Ba, respectively. This abnormal grain size is related to the partial melting temperature (NKN-CaCuN: 960 ℃; NKN-SrCuN: 971 ℃; NKN-BaCuN: 945 ℃).

The influence of sodium hypochlorite concentration on the fibrin structure of human blood clots and transforming growth factor-beta 1 release: an ex vivo study

  • Anisha Mishra ;Velmurugan Natanasabapathy;Nandini Suresh
    • Restorative Dentistry and Endodontics
    • /
    • 제47권4호
    • /
    • pp.42.1-42.11
    • /
    • 2022
  • Objective: This study investigated the effects of various concentrations of sodium hypochlorite (NaOCl) on human whole-blood clotting kinetics, the structure of the blood clots formed, and transforming growth factor (TGF)-β1 release. Materials and Methods: Human whole blood was collected from 5 healthy volunteers and divided into 4 groups: CG (control, 0.5 mL of blood), BN0.5 (0.5 mL of blood with 0.5 mL of 0.5% NaOCl), BN3 (0.5 mL of blood with 0.5 mL of 3% NaOCl), and BN5.25 (0.5 mL of blood with 0.5 mL of 5.25% NaOCl). The effects of NaOCl on clotting kinetics, structure of fibrin and cells, and release of TGF-β1 were assessed using thromboelastography (TEG), scanning electron microscopy (SEM), and enzyme-linked immunosobent assay, respectively. Statistical analysis was conducted using the Kruskal Wallis and Mann-Whitney U tests, followed by the post hoc Dunn test. A p value < 0.05 indicated statistical significance. Results: The blood samples in BN0.5 and BN3 did not clot, whereas the TEG of BN5.25 showed altered clot formation. Samples from the CG and BN3 groups could only be processed with SEM, which showed that the latter lacked fibrin formation and branching of fibers, as well as clumping of red blood cells with surface roughening and distortion. TGF-β1 release was significantly highest in BN3 when all groups were compared to CG (p < 0.05). Conclusions: Each concentration of NaOCl affected the release of TGF-β1 from blood clots and altered the clotting mechanism of blood by affecting clotting kinetics and cell structure.