• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.26-33
• /
• 1990

To study the wood quality factors of Populus nigra $\times$ maxmowiczii known a rapidly growing species, the variations of green moisture contents, bulk density, wood fibre dimensions, microfibril angles, and number of leaf knot in stem wood were investigated. The heartwood contained a higher moisture content than the corresponding sapwood. Bulk density in radial patterns variations decrease outward from the pith, then increase toward the bark. The wood-fiber length and diameters had somewhat smaller values than on Populus alba $\times$ glandulosa or Populus euramericana. The microfibril angles decreased rapidly toward the outside, and their mean values were about 16 degree. The grain angles run nearly parallel to the cell axies. Number of leaf knot showed a fluctural change above ground level to a point near the base of the crown and then increased rapidly to the top of tree and average number of leaf knot varied exclusively from tree to tree.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.737-745
• /
• 2013

Offshore wind farms are rapidly growing owing to their comparatively more stable wind conditions than onshore and land-based wind farms. The power capacity of offshore wind turbines has been increased to 5MW in order to capture a larger amount of wind energy, which results in an increase of each component's size. Furthermore, the weight of the marine turbine components installed in the nacelle directly influences the total mechanical design, as well as the operation and maintenance (O&M) costs. A reduction in the weight of the nacelle allows for cost-effective tower and foundation structures. On the other hand, longer transmission distances from an offshore wind turbine to the load leads to higher energy losses. In this regard, DC transmission is more useful than AC transmission in terms of efficiency because no reactive power is generated/consumed by DC transmission cables. This paper describes some of the challenges and difficulties faced in designing high-power-density power conversion systems (HPDPCSs) for offshore wind turbines. A new approach for high gain/high voltage systems is introduced using transformerless power conversion technologies. Finally, the proposed converter is evaluated in terms of step-up conversion ratio, device number, modulation, and costs.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.57-69
• /
• 2011

This study examined the relationship between Phragmites australis' growth and sediment properties at mud tidal flat of Donggum-ri, Gilsang-myeon, Gangwha-gun, Incheon city. Field survey was carried out from May, 2010 to October, 2010. Water content, soil texture, electric conductivity and water table depth for sediment, density, height, dry weight and flowering for P. australis were examined at several plots from the starting point (the coastal embankment) to the end point of the two populations. The result was as follows. Firstly, the water table increased along distance from the embankment at one line (N-line) but was similar at the other line (S-line) in a P. asustralis population. Water tables were higher out of than within a P. australis population at two populations. Secondary, in N-line, the height and dry weight of P. australis decreased along the distance from embankment but, in S-line, those were similar in its population. P. australis' growth was dependent on electric conductivity at lower layer (water table level) rather than upper one (the surface). Thirdly, density of P. australis changed during growing season and was similar in a population, except for the end point of patch. In summary, the growth and distribution of P. australis were dependent on salt content of tidal flat's sediment (water table level) and this was affected by fresh water of the inland.

• 한국화재소방학회논문지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2000

절연재료의 내부에서 부분방전이 발생하면 국부파괴와 완전절연파괴의 원인이 된다. 부분방전으로 생기는 트리잉은 절연재료를 열화시키고 절연 수명을 단축시키는 중요한 원인이 된다. 따라서 절연파괴의 예측과 절연재료의 수명을 진단할 수 있는 방법에 대한 연구는 매우 중요하다. 고전압 하에서 일어나는 트리잉 현상에 대해서 저밀도 폴리에틸렌의 트리잉 개시 전압과 그 진전 과정을 진성파괴의 견해에서 고찰하였다. 이러한 관점에서 본 연구는 고전압하에서 일어나는 트리잉현상에 대해서 저밀도폴리에틸렌에서 트리형상의 전계의존성에 관하여 고찰하였다. 결과로서 트리의 성장을 그 내부가 각각 유전체 혹은 도체라고 가정했을 때의 중간적인 특성을 갖는다는 추리하에 이론적으로 검토한 결과, 실험결과와도 잘 일치됨을 알 수 있었다.

• Preventive Nutrition and Food Science
• /
• 제12권4호
• /
• pp.217-221
• /
• 2007

Within the elderly population, the use of calcium supplements and the intake of calcium from food are on the rise in order to maintain health. Calcium is absorbed as an ion in vivo, leading to speculation that absorption efficiency is affected by the solubility of the calcium consumed. In our study, the bioavailability of two types of calcium supplements with different solubilities was evaluated. Experimental animals were fed water-soluble or insoluble calcium supplements for 6 weeks. We found that blood alkali phosphatase activity, osteocalcin content, and urine crosslinks values were not different between the groups. Similarly, the degree of apparent calcium absorption between the two calcium supplements was not significantly different. The bone mineral density and bone mineral content of the femur and the tibia increased in the group that consumed insoluble calcium compared with those of the water-soluble calcium supplemented group. However, when considering body weight, the bone mineral density value for all areas, including the spine, was significantly higher in the group that consumed the water-soluble calcium supplement.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.349-354
• /
• 2009

초고층 건물의 안전성 및 사용성을 합리적으로 확보하고 유지하기 위해서 부재의 구조 반응 모니터링은 필요하다. 이러한 대형 건물의 건전도 모니터링은 최근 들어 많은 연구자들에 의해서 관심 되어지고 있지만 건물 특성상 계측 대상 부재가 많고 하중과 구조반응의 관계가 복잡하기 때문에 센싱 부재 선정의 어려움으로 그 적용에 한계가 있다. 본 논문에서는 부재의 변위기여도 및 변형에너지밀도를 기반으로 초고층 건물의 안전성 모니터링을 위한 구조반응 계측 부재 선정에 대한 연구를 수행하였다.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.848-852
• /
• 2008

Characteristics of microcrystalline-silicon thin-films deposited by plasma-enhanced chemical-vapor deposition (PECVD) method were studied. There were optimum values of RF power density and $H_2$ dilution ratio $(H_2/(SiH_4+H_2))$; maximum grain size of about 35 nm was obtained at substrate temperature of 250 $^{\circ}C$ with RF power density of 1.1 W/$cm^2$ and $H_2$ dilution ratio of 0.91. Larger grain was obtained with higher substrate temperature up to 350 $^{\circ}C$. Grain size dependence on RF power density and $H_2$ dilution ratio could be explained by etching effects of hydrogen ions and changes of species of reactive precursors on growing surface. Surface-mobility activation of reactive precursors by temperature could be a reason of grain-size dependence on the substrate temperature. Microcrystalline-silicon thin-films that could be used for flat-panel electronics such as active-matrix organic-light-emitting-diodes are expected to be fabricated successfully using these results.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.96-103
• /
• 2009

This study was fulfilled to investigate the forest fire risk of forest fuels based on the combustion characteristics of living leaves of coniferous trees and broadleaf trees naturally growing in Youngdong areas of Gangwon Province by using cone calorimeter and smoke density chamber. According to the result, Pinus densiflora and Pinus rigida among coniferous trees released a greater amount of heat release than other kinds. The total smoke release varied depending on the species, whereas Pinus koraiensis showed the largest amount of smoke release. With regard to maximum smoke density, it was much higher in coniferous trees than in broadleaf trees. With regard to smoke temperature, Pinus densiflora showed the lowest compared to other kinds up until 200s from the ignition, but all most trees uniformly maintained constant temperature of about $70^{\circ}C$ after 200s. The concentrations of CO and $CO_2$ release were drastically increased at about 150s and then gradually decreased thereafter. Pinus densiflora showed a bit higher CO release than broadleaf trees, but there was no distinct difference in $CO_2$ release among tress.

• Nano
• /
• 제13권11호
• /
• pp.1850136.1-1850136.12
• /
• 2018

Three-dimensional (3D) mixed phases NiSe nanoparticles growing on the nickel foam were synthesized via a simple one-step hydrothermal method. A series of experiments were carried out to control the morphology by adjusting the amount of selenium in the synthetic reaction. Meanwhile, the as-prepared novel column-acicular structure NiSe exist three advantages including ideal electrical conductivity, high specific capacity and high cycling stability. It delivered a high capacitance of $10.8F\;cm^{-2}$ at a current density- of $5mA\;cm^{-2}$. An electrochemical capacitor device operating at 1.6 V was then constructed using NiSe/NF and activated carbon (AC) as positive and negative electrodes. Moreover, the device showed high energy density of $31W\;h\;kg^{-1}$ at a power density of $0.81kW\;kg^{-1}$, as well as good cycling stability (77% retention after 1500 cycles).

• BMB Reports
• /
• 제47권9호
• /
• pp.506-511
• /
• 2014

We investigated the effects of high calorie and low calorie diets on skeletal integrity, and whether ${\beta}$-adrenergic blockade (BB) attenuates bone loss induced by dietary calorie alteration. Male 6-week-old C57BL/6 mice were assigned to either an ad-lib fed control diet (CON), a high calorie diet (HIGH), or a low calorie diet (LOW) group. In each diet group, mice were treated with either vehicle (VEH) or propranolol, a ${\beta}$-adrenergic antagonist. Over 12-weeks, ${\beta}$-blockade mitigated body weight and fat mass increases induced by the high calorie diet. Femoral trabecular bone mineral density and the expression levels of osteogenic marker genes in bone marrow cells were reduced in HIGHVEH and LOWVEH mice, and BB significantly attenuated this decline only in HIGH mice. In summary, the magnitude of bone loss induced by low calorie diet was greater than that caused by high calorie diet in growing mice, and ${\beta}$-blockade mitigated high calorie diet-induced bone loss.