• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.96-100
• /
• 2007

There was no difference in total light transmissivity of covering materials. But the light transmittance of J-2 in greenhouse was by 78.25 which was higher than any other film. The high light transmittance of J-2 was come from low water condensation and dust attached in film surface. The ultraviolet light of J-3 was completely intercepted. The ultraviolet transmittance rate of others was from 62 to 76%. In no heating oriental melon cultivation, the air temperature in tunnel was 15 to $21^{\circ}C$ higher than outer, and the soil temperature in tunnel was 20 to $25^{\circ}C$ higher than outer. Air temperature and soil temperature of J-2 were higher than any other film.

• Journal of Plant Biotechnology
• /
• v.36 no.2
• /
• pp.174-178
• /
• 2009

Presently, we report a simple, reproducible and high frequency plant regeneration in Hibiscus syriacus L. using axillary buds. H. syriacus was regenerated from axillary buds directly or through a callus phase. Regenerated shoots were directly induced from young and fresh axillary buds cultured on Murashige and Skoog medium (MS) supplemented with 0.01 mg/L of the growth regulator thidiazuron (TDZ) after 2 weeks of culture. Directly induced shoots were transferred to hormone-free MS medium and root development was observed after 6 weeks. On the other hand, old and stale axillary buds were regenerated to shoots via callus induction on MS medium containing 0.01–2 mg/L TDZ after 4 weeks. A TDZ concentration of 0.01 mg/L was most effective in callus formation. Green callus was transferred to MS medium containing 0.01 mg/L α-naphthalene acetic acid (NAA) and 0.5 mg/L benzylaminopurine (BA). After 4 weeks, callus had developed into multiple shoots. Plantlets were formed from 10 week cultures of single shoots on hormone-free MS medium. Regenerated plantlets were cultured on MS medium for one month and then transferred to pots containing garden soil. Potted plants were acclimatized for one month and grown to maturity under greenhouse conditions. The present study has shown that various concentrations of plant growth regulator can be effective for in vitro plant regeneration of H. syriacus. The direct and indirect regeneration protocol presented here will be useful for understanding the manipulation and propagation of H. syriacus.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.783-786
• /
• 2000

This study was carried out to examine the effect of root-zone temperatures on seedling growth, mineral contents and antioxidative enzyme activities of grafted watermelon. The grafted watermelon seedlings were grown in greenhouse bed for 20 days at root-zone day temperatures of 10, 15, $25^{\circ}C$ while night temperature was maintained at $10^{\circ}C$. Growth such as shoot height, leaf length, leaf number, stem diameter, and fresh and dry weights increased as increasing root-zone temperatures, and leaf area with $25^{\circ}C$($52.79mm^2$) was two times that of control($21.50mm^2$). As increasing the root-zone temperatures, Mn, Ca, Fe contents increased, K, P, Mg were non significant, and Na decreased. The activities of ascorbate peroxidase(APX) and guaiacol peroxidase(GPX) known as antioxidative enzyme were higher at $10^{\circ}C$ than $25^{\circ}C$.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.20-26
• /
• 2018

This study was conducted to develop a device for measuring the air flow by space variation through monitoring program, which acquires data by each point from each environmental sensor located in the greenhouse. The distribution of environmental factors(air temperature, humidity, wind speed, etc.) in the greenhouse is arranged at 12 points according to the spatial variation and a large number of measurement points (36 points in total) on the X, Y and Z axes were selected. Considering data loss and various greenhouse conditions, a bit rate was at 125kbit/s at low speed, so that the number of sensors can be expanded to 90 within greenhouse with dimensions of 100m by 100m. Those system programmed using MATLAB and LabVIEW was conducted to measure distributions of the air flow along the greenhouse in real time. It was also visualized interpolated the spatial distribution in the greenhouse. In order to verify the accuracy of CFD modeling and to improve the accuracy, it will compare the environmental variation such as air temperature, humidity, wind speed and $CO_2$ concentration in the greenhouse.

• Journal of Environmental Science International
• /
• v.27 no.3
• /
• pp.195-202
• /
• 2018

The present study was carried out to investigate the effects of spermine treatment on the growth, yield and quality in strawberry under low-temperature condition, and thereby develop a chemical method to minimize damages by low temperature in greenhouse cultivation. Spermine treatment significantly improved the growth of strawberry in terms of leaf number, leaf area, leaf length, leaf diameter, plant height and plant weight. The highest effect was observed in the 250 uM spermine treatment and the effect tended to be maintained during the entire growth period of 90 days. Fresh weight and dry weight were significantly different depending on the concentrations of spermine. Strawberry plants treated with 250 uM spermine showed higher fresh weight and dry weight compared to untreated control plants during the growth period. Fruit weight, fruit length and fruit diameter were relatively higher when treated with $100{\mu}M$ spermine compared to other treatments. The fruit yield was the highest with 14 fruits per plant at $250{\mu}M$ spermine treatment and the coloration of the fruit was the best at this treatment with the Hunter a and b values of 46.56 and 28.75, respectively. The hardness of strawberry fruit tended to increase higher than 2N at $250{\mu}M$ and $500{\mu}M$ 250 uM spermine treatment. The sugar content of strawberries treated with $250{\mu}M$ spermine was $9.5^{\circ}$ Bx which was $1.6^{\circ}$ Bx higher compared to that in untreated control. However, spermine treatment did not affect the acidity of fruit and it remained 0.68-0.76% regardless of treatment concentrations. These results suggest that spermine treatment has a positive effect on the growth and productivity of strawberry fruit under abnormal low-temperature condition. The positive effect was the highest at $250{\mu}M$ spermine treatment and gradually decreased in the order of $100{\mu}M$, $500{\mu}M$, and untreated control.

• Current Research on Agriculture and Life Sciences
• /
• v.20
• /
• pp.9-18
• /
• 2002

A total of 31 C. chinense lines selected from 2000 screening were tested again for resistance to P. capsid but resistance was not found in tile lines. A total of 26 selections from Korean land races tested 2001 spring were tested again for resistance to P. capsici, KC180, KC230, KC195 and KC194 showed moderate resistance to P. capsid. However, it was apparent on the basis of horticultural characteristics that KC180 and KC230 had been naturally crossed with AC2258 and CM334, respectively. CM334 and AC2248 seed lots that were increased in different years were taken out and tested for resistance to improve their genetic purity because the resistant genetic resources have been showing some off-types in tile population. Off-types began to be found in 1992 seed lots and tile proportion and degree of tile offs was increasing with time up to 2001. Plants true to the type in 1992 seed lots were selected and their inbred seeds were mass produced in a net cage in the greenhouse. AC2258 included in the experiment together was uniform. In 1995 seed lots of CM334, plants with resistance to P. capsici and low or no number of lateral branching at cotyledonary axil, although they were off from tile original CM334, were found and selection was applied to breed lines fixed in tile characters.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.64-70
• /
• 2018

In this study, eleven major coastal areas were selected and the climate environment and the greenhouse direction were analyzed. This research investigates the greenhouse heat loss according to the wind environment at target areas. The target areas were selected based on heated greenhouse cultivation area and wind environment standard. Temperature, wind speed, and wind direction among weather data for 30 years were collected and analyzed. The data were divided into the minimum, average, and maximum temperatures and the Meteorological Agency criteria applied to the weather and wind direction criteria. Data were collected in the range of $0{\sim}180^{\circ}$ considering the symmetry of the shape of the greenhouse. In addition, the wind direction is different for each region and the applied wind direction can be different when referring to the longitudinal direction of the greenhouse and the data are collected in the range of $0{\sim}90^{\circ}$. The results of this study are expected to be used to calculate the heating load of greenhouse installed in places wind speed high.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.285-292
• /
• 2020

Because the inner environment of greenhouse has a direct impact on crop production, many studies have been performed to develop technologies for controlling the environment in the greenhouse. However, it is difficult to apply the technology developed to all greenhouses because those studies were conducted through empirical experiments in specific greenhouses. It takes a lot of time and cost to develop the models that can be applicable to all greenhouse in real situation. Therefore studies are underway to solve this problem using computer-based simulation techniques. In this study, a model was developed to predict the inner environment of glass greenhouse using CFD simulation method. The developed model was validated using primary and secondary heating experiment and daytime greenhouse inner temperature data. As a result of comparing the measured and predicted value, the mean temperature and uniformity were 2.62℃ and 2.92%p higher in the predicted value, respectively. R² was 0.9628, confirming that the measured and the predicted values showed similar tendency. In the future, the model needs to improve by applying the shape of the greenhouse and the position of the inner heat exchanger for efficient thermal energy management of the greenhouse.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.225-233
• /
• 2019

In the summer season, natural ventilation is commonly used to reduce the inside air temperature of greenhouse when it rises above the optimal level. The greenhouse shape, vent design, and position play a critical role in the effectiveness of natural ventilation. In this study, computational fluid dynamics (CFD) was employed to investigate the effect of different roof vent designs along with side vents on the buoyancy-driven natural ventilation. The boussinesq hypothesis was used to simulate the buoyancy effect to the whole computational domain. RNG K-epsilon turbulence model was utilized, and a discrete originates (DO) radiation model was used with solar ray tracing to simulate the effect of solar radiation. The CFD model was validated using the experimentally obtained greenhouse internal temperature, and the experimental and computed results agreed well. Furthermore, this model was adopted to compare the internal greenhouse air temperature and ventilation rate for seven different roof vent designs. The results revealed that the inside-to-outside air temperature differences of the greenhouse varied from 3.2 to $9.6^{\circ}C$ depending on the different studied roof vent types. Moreover, the ventilation rate was within the range from 0.33 to $0.49min^{-1}$. Our findings show that the conical type roof ventilation has minimum inside-to-outside air temperature difference of $3.2^{\circ}C$ and a maximum ventilation rate of $0.49min^{-1}$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.6
• /
• pp.45-52
• /
• 2009

This study was conducted in the process that the basic plan of the formation of the thermal energy complex in the Iwon reclaimed land of Taean was being made. Targeting for the large-sized greenhouse to be made in this area, it examined the cooling and heating load and the amount of ventilation, and also analyzed the economic efficiency of heating. The research results are as per the below: The minimum ambient temperature of this area was measured on January 7, 2001, which was $-18.7^{\circ}C$, and the maximum ambient temperature of this area was measured on July 24, 1994, which was $36.7^{\circ}C$. The maximum heating load was 39,011 MJ/h, but the date when the maximum heating load was not consistent with the date when the minimum temperature was measured. The maximum cooling load was 88,562MJ/h, It was approximately 2.3 times of the maximum heating load, which was measured at 14:00 hours on September 4, 2000. The maximum amount of ventilation heat was 138,639MJ/h. Assuming the rate of solar heat use as 10%, 20%, 50%, and 100%, the total sum of cost-benefit would be ￦-193,450,000, ￦-634,930,000, ￦-3,372,960,000, and ￦-9,850,420,000, respectively 20 years later. The break-even point of the geothermal heat pump would be about 4 years for 10% use, about 3 years for 20% or 50% use, and approximately 6 years for 100% use. It was found that 50% use would be most advantageous. In case two systems are combined, the break-even point will be 10 years, 8 years, and 11 years respectively.