• Journal of the Korean Solar Energy Society
• /
• v.35 no.5
• /
• pp.1-10
• /
• 2015

Whereas recent domestic buildings and industrial facilities are being constructed as large as possible, the daylighting systems for the large space have rarely been developed. Domestic situation has been reported as only several small or medium sized daylighting systems have been developed, and the large scaled systems have entirely being imported from abroad. We have developed a large scaled daylighting system for the big space. The developed system have been evaluated in terms of the average system efficiency and daylighting factor. Each results are shown with tabulated experimental data.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.118-128
• /
• 2014

This study examines how green operations affect firm's environmental performance with green innovation as a mediator in the context of electronic industry. We carry out an empirical study with 141 valid questionnaires collected from high-tech manaufactures in Taiwan. The results show that positive relationships exist among green operations, green innovation and environmental performance (in both operational performance and managerial performance). However, an integration of green operations with green innovation would influence firm's environmental performance more positively than the sole effects of green operations. It suggests that high-tech manufacturers should pay greater attention to green innovative strategies in order to cope with customer demand and, thereby, enhancing customer satisfaction and sustainable operations. This study has contributed to the extant literature by providing valuable academic references and pragmatic guidelines for firms to gain competitive advantages through green operations and green innovation.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.129-137
• /
• 2012

This thesis introduced an azimuth tracking prismatic daylighting system. The system improved several issues of the previous passive prismatic daylighting system: low efficiency at sunrise and sunset, glare effect and polarized. The system was developed to track the movement of sun with azimuth tracking device, and it has its own power from the attached solar cells. We compared the with previous passive one in terms with system efficiency and daylighting factors(DF).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.309-312
• /
• 2016

Green Internet of Things (IoT) is the study and practice of eco-friendly sustainable computing. The basic goal of green computing is to reduce the use of materials and maximize energy efficiency with reliable and secure communications. The paper presents various technologies and issues regarding green IoT. It also studies the green Information and Communication Technology (ICT) such as green M2M, green Cloud Computing (CC), and green Data Center (DC). In addition, this paper mentions about the reliability in IoT Communication and and issues to achieve green IoT communication by applying efficient activity scheduling technique for energy saving. Finally, we propose the green IoT-Home Service (GIHS) model which provides efficient energy management in home automation system.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.302-309
• /
• 2009

The effectiveness of Building Information Modeling (BIM) tools and processes has been recognized by the industry and owners are beginning to adopt Triple Bottom Line accounting practices, to enhance economic performance and environmental and social performance. However, the widespread and practical application of Green BIM remains largely unrealized. The authors identify that lack of understanding of the applicability of sustainability metrics to BIM design process is a significant barrier to this adoption. Through literature review this paper outlines the various sustainability metrics available to construction and elaborates on the potential of BIM for sustainable design. The paper maps and correlates applicable concepts of sustainability evaluation systems to BIM and describes the constraints in current BIM tools.

• Advances in nano research
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2021

Synthesis of nanoparticles using green technology using plants is gaining significant attention as it is an environmentally friendly substitute to conventional physical and chemical methods. The present study was focused on the chemical and green synthesis of Iron Oxide nanoparticles from ferric chloride. The green synthesis was achieved by utilizing the bio components of Hibiscus rosa-sinensis. The Fe3O4 nanoparticles with the size range of 87-400 nm were synthesized by wet chemical reduction technique which are unstable, prone to aggregation while in green synthesis the phytochemicals present in the leaf extract acts as the capping as well as the reducing agent thus the green synthesized iron (III) oxide nanoparticles were naturally stabilized, spherical shaped and are in the size range of 2-80 nm. The results of both the protocols are compared and presented briefly.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.595-599
• /
• 2011

ALC(Autoclaved Lightweight Concrete) is produced using quartz sand, lime and cement and water. And aluminum powder is used for blowing agent. ALC is manufactured by autoclave chamber under high-temperature and high-pressure. Generally, ALC is 1/4 levels lighter than concrete and mortar, because it has a lot of pores. So density of ALC is about 0.45~0.65 g/$cm^3$. But, ALC has a weakness, typically low strength, with its porous structure. So, it is necessary to excellent strength properties for extensive apply of ALC materials in high porosity. In this study, melamine resin was used to improve the strength characteristics of ALC materials. We performed compressive and bending strength measurements. Compressive strength of ALC with 2% melamine resin increased 26.88% than 'melamine-free' ALC. Also we performed functionality evaluation such as thermal conductivity, sound absorption, and flame-resistance.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.56-63
• /
• 2013

Daylighting system is an alternative lighting system using daylight collecting device, light transformer and light diffuser. In this paper, we developed a daylighting system in which the collecting device composed by dual parabolic reflectors, the silica optical fiber adapted to the light transformer and light diffuser made of the polyglass square sheet. We have estimated the system efficiency and general color rendering index(Ra) of the developed system. The system efficiency measured to 23.8% and Ra was revealed as 95. Ra number of the developed system is bigger than the number(65) of the previous fresnel lens based sunlight collector.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.89-94
• /
• 2012

ALC was fabricated using cement, lime and quartzite by hydrothermal reaction. The kind of quartzite was reviewed for ALC properties and returned slurry was recycled in this study. Munkyung and Kumpyung quartzite was used and quartzite powder was experimented. The major mineral phase of Munkyung quartzite was quartz and muscovite crystal but that of Kumpyung was quartz. It was certain that crystallinity of Kumpyung quartzite was superior to Munkyung quartzite. Compressive strength and A-number of ALC with Kumpyung quartzite was higher than that of ALC with Munkyung quartzite under similar specific gravity. These results was resulted from major mineral phase, crystallinity and minor components of quartzite.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.5
• /
• pp.240-245
• /
• 2013

We developed a parabolic reflector based daylighting system which can be used as an alternative indoor daytime lighting device such as for fluorescent lamps. The system comprises three main components : a daylight concentrator made of 4 pairs of parabolic reflectors and mirrors, a silica optical fiber bundle based light transmitter, and 4 light diffusers for the final indoor delivery of the collected daylight. We analyzed the performance of the system and revealed the system efficiency and daylighting factor. All test methods follow the rule, NR PV601 : 2007-daylighting system, governed by Korea Energy Management Corporation.