• 디자인학연구
• /
• 제19권3호
• /
• pp.105-116
• /
• 2006

In product manufacturing industries, a recent issue is the green concept. The green concept is a complicated area. If the green concept is for products, its serious issues have to be criticized. Although the importance of the green concept has overflowed, its influences have not been disputed vigorously. So this study is to critic the serious issues of the green concept in aesthetics in product design, manufacturing, and products' prices. The green environment has four representative elements: systems, policies, minds, and technologies, but they are not in the field of design. An element of the green concept, green design is also a sub concept for design, so it should be based on aesthetics. It is green aesthetics. But since green design first appeared, it has never approached by aesthetics because it has mostly had social meanings and expectations. So for green aesthetics, to think about what makes a product, and what can be aesthetic issues among them are important. Products consist of form, structure, material, and technology. Form means different shapes in a structure, but there cannot be any specific directions for a green concept. Structure has two kinds: interior and exterior structure. While interior structure has a technological character, exterior structure is deeply related with aesthetics, but it has also no chance for green concept. Material can be divided as two also: aesthetic and technological. Aesthetics materials mean the colors, opacity, and tactile sense of materials, but they are not aesthetic issues. Technological materials are recycled materials or non-recycled materials. Even if recycled materials are used today, they are close to systems or policies rather than aesthetics. With this result, green aesthetics is a very difficult concept. Second, green products are usually 30% more expensive than general products. But every consumer has his or her own economical conditions, and nobody can coerce consumers into buying expensive green products for green environments. And green products without good quality cannot satisfy consumers. This means that green concept is not accomplished by just manufacturing green products. Third, although a lot of proposals have appeared as green design in exhibitions, most of them are close to craft because they are so hard to be manufactured. Manufacturing is the first consideration for products. These three issues are enough to explain why green concept is complicated in manufacturing products. If they are not solved, the green concept is just a fiction. So if this study proposes a turning point against blind green-oriented atmosphere, it will be meaningful enough.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.198-201
• /
• 2009

Due to piezoelectric property of regenerated cellulose paper, a green energy harvester using an electro-active paper (EAPap) was studied. In order to design the green energy harvester, we simulated cymbal type energy harvesting structures for single and multi-stacked layers of EAPap films. From the simulation, the optimized material orientation, thickness of harvesting structure was selected. By measuring of the induced output voltage by applying stress on energy harvester will be explained in detail. Therefore we propose the feasibility of the nature-friendly piezoelectric EAPap as a new green energy harvesting material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.301-302
• /
• 2009

The Green emitting OLED was fabricated with the structure of ITO(plasm treatment)/TPD($400\;{\AA}$)/$Alq_3(600\;{\AA})$/LiF($5\;{\AA}$)/Al($1200\;{\AA}$). Turn-on voltage of PMOLED was 7 V and luminance was 7,371 cd/$m^2$ at the RF power of 25W. O2 plasma treatment of ITO surface was result in lowering the operating voltage and improving luminance of green OLED.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.355-357
• /
• 2001

ZnO thin films were deposited on (001) sapphire substrate at various ambient gas pressure by pulsed laser deposition(PLD). Oxygen was used as ambient gas, and oxygen gas pressure was varied from 1.0${\times}$10$\^$-6/ Torr to 500 mTorr during the film deposition. As oxygen gas pressure increase in the region below critical pressure photoluminescence(PL) intensity in UV and green region increase. As oxygen gas pressure increase in the region above critical pressure photoluminescence(PL) intensity in UV and green region decrease. Each of critical ambient gas Pressures was 350 mTorr for UV emission and 200 mTorr for green emission.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.33-37
• /
• 2013

The properties of LTCC green sheets formed by the MLS-22 powder of NEG Inc. were investigated for acrylic binders with different PVB and Tg in the variation of temperature. The elongation of the green sheets showed large variation depending on the temperature, and was rapidly decreased near the Tg of the sheets. With the increase of the ratio of plasticizer/binder (P/B), large elongation of the sheets was observed due to the decrease of the Tg. In the stacking process of the multilayer ceramic, the optimal control of the temperature is highly required depending on the Tg of the binder and the ratio of P/Buniform coating.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.127-131
• /
• 2006

Depot have a lagged behind structure in the side of building up the view. With this reason, people have been recognized depot as hatred facility causes to have car noise, air pollution. In the other hand, depot become a underground and complex facility as a higher-value added building, and moreover, it need to understand the environment that depot structure have a specific field condition to apply green roof system. 1) Analysis proper waterproofing material and root barrier apply to depot need root penetrating test method 2) Suggest root barrier and waterproofing material relate to maintain and construction for green roof system 3) Construction condition for depot have crack movement of structure by vehicle vibration and root penetrating force by plant growth

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.922-927
• /
• 2001

Single-layer green ELs was fabricated with using molecularly-dispersed Bu-PBD into poly-N-vinylcarbazole(PVK) which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PVK:Bu-PBD:C6(∼ 100nm)/Ca(20nm)/Al(20nm) was employed with variable doping concentration. The keys to obtain high quantum efficiency was excellent film forming capability of molecularly dispersed into PVK and appropriate combination of cathode for avoiding exciplex. We obtained the turn-on voltage of 4.2V and quantum efficiency of 0.52% at 0.lmol% of C6 concentration which has been improved about a factor of 50 in comparison with the undoped cell. The PL peak wavelengths wouldn\`t be turned by changing the concentration of the C6 dopant. Green EL emission peak and FWHM were 520nm and 70nm respectively. PL emission peak was obtained at 495nm.

• 에너지공학
• /
• 제29권3호
• /
• pp.50-56
• /
• 2020

Currently, 3D printing technology is a new revolutionary additive manufacturing process that can be used for making three dimensional solid objects from digital films. In 2019, this 3D printing technology spreading vigorously in production parts (57%), bridge production (39%), tooling, fixtures, jigs (37%), repair, and maintenance (38%). The applications of 3D printing are expanding to the defense, aerospace, medical field, and automobile industry. The raw materials are playing a key role in 3D printing. Various additive materials such as plastics, polymers, resins, steel, and metals are used for 3D printing to create a variety of designs. The main advantage of the green cement for 3D printing is to enhance the mechanical properties, and durability to meet the high-quality material using in construction. There are several advantages with 3D printing is a limited waste generation, eco-friendly process, economy, 20 times faster, and less time-consuming. This research article reveals that the role of green cement as an additive material for 3D printing.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.426-430
• /
• 2012

The properties of green sheet were investigated in order to understanding an effects of organic solvent mixture ratio for solid oxide fuel cells fabrication. The purpose of this work is to optimize the slurry condition using the design of experiment to improve green sheet properties. The elongation increased with increasing amount of binder and solvent. With increasing amount of solvent, the air permeability increased but the tensile strength decreased. The best properties of the green sheet appeared amount of the binder 17 wt%, solvent 35 wt% and powder 48 wt%. The optimum condition of green and sintered density for solid oxide fuel cells fabrication was obtained in the sample pressured at 800 $kgf/cm^2$.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1107-1113
• /
• 2004

Dry film method for large size of PDP(Plasma Display Panel) module has been actively investigated. This method for lead-free transparent dielectric formation depends on green sheet technology. By adjusting the composition of transparent dielectric powders and organics, uniformly dispersed slurry was fabricated, Viscosity of the slurry exhibited pseudoplastic behavior for tape casting, Cast green sheets were tested under tensile condition at room temperature. It was found that the increase in transparent dielectric powder and binder ratio leads to decrease in strain to failure of green sheets from 120 % to 34 % and from 255 % to 4 %, respectively. Tensile strength of green sheets decreased abruptly with increase of transparent dielectric powder ratio, with minimum at 0.13 MPa. On the other hand, tensile strength increased continuously from 0.1 MPa to 2.4 MPa with increase of binder ratio. The green sheets were attached on the glass substrate and heated by following firing schedule. As a result, the best result was obtained when fired at 580 $^{\circ}C$ for 15 min and had transmittance of 78 % in visible range 550 nm.