• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.3
• /
• pp.53-66
• /
• 2005

The objective of this study is the classification of priority areas for the implementation of green roof by evaluating environmental deterioration in Seoul. Non-permeable pavement, air pollution, habitual floods, energy use, heat island and green space are considered in this assessment indicators. The expert questionnaire survey was conducted in order to determine the most important indicators. These indicators were then, thoroughly evaluated. As a result, high priority areas for the implementation of green roof were deduced in the following order of the districts : Jung, Sungdong, Jungrang, Youngdungpo, Jongro and Kangnam. The highest priority areas were determined to be crowded business-commercial areas. Low priority areas are analyzed in the following order of the districts : Kwanak, Nowon, Seocho and Dobong. The result of this study can be utilized for environmental planning and decision of related policies. Additionally, it can be promoted that awareness of implementing green roof of citizens, policy makers and building owners and effect of green networking between inside and outside Seoul can be increased.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.5
• /
• pp.1-10
• /
• 2015

Whereas recent domestic buildings and industrial facilities are being constructed as large as possible, the daylighting systems for the large space have rarely been developed. Domestic situation has been reported as only several small or medium sized daylighting systems have been developed, and the large scaled systems have entirely being imported from abroad. We have developed a large scaled daylighting system for the big space. The developed system have been evaluated in terms of the average system efficiency and daylighting factor. Each results are shown with tabulated experimental data.

• Computers and Concrete
• /
• v.10 no.2
• /
• pp.95-104
• /
• 2012

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.401-414
• /
• 2012

The adoption of Green Frame is expected to provide economic benefits, since construction costs are reduced by the in-situ production of precast concrete column and beam. The cost reduction can ultimately be realized by saving transportation costs and the overhead and profit of PC plants. The cost structure of Green Frame, which is built up using composite precast concrete members, is similar to that of a bearing-wall structure, but the difference in construction process has resulted in some cost differences for a few items. In particular, production and installation is the principal work involved in Green Frame made by precast concrete members, while form and concrete work is the principal work for a bearing-wall structure. As such, the rental time and fee for a tower crane should be compared through time analysis. To verify reliability, this study focused on developed residential projects to estimate the construction costs. Through this analysis, it was found that the costs of Green Frame were 1.57% lower than the costs of bearing-wall structure. The results of this study will help in the development of a management plan for the structural work of Green Frame.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.4
• /
• pp.1-10
• /
• 2000

This study aims at the new design system development of landscape architecture structures, as soundproof wall using reinforced soil block. This structures, that is new soundproof wall system, have to be maintained stability on acting critical wind load, which is combined exist soundproof wall system and soundproof wall system using environmental green stone block. To the harmony of this system, the post block, so-called landscape block or cast block, is manufactured. It's possible to stand of the post bearing system combined with post-pile and post block. Through the comparison with a serious code for the acting wind load on the soundproof wall, the reasonable wind load could be calculated. Also, the mechanical stability on the green stone block was checked by the Lab. tests based on the UBC (Uniformed Building Code). Because the critical height of soundproof wall system using green stone generally was restricted, the new system demands to combination of the exist system and the new system. For the stability analysis of them, the utility program, SAP2000, was used. And, a semi-auto program on the design system of the new soundproof wall using green stone was developed, which can be easily use because of the simplification.

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.49-59
• /
• 2012

The development of green IT for business will open up exciting opportunities for finding new and efficient way of doing businesses. This study is to contribute to a better understanding of green IT by carrying out the survey among IT users on the factors of green IT and IT users' perception to the GIT. Based on the literature study, a conceptual framework of green IT will be developed to investigate the relationship between green IT and the user's intention to use GIT.

• 보존과학연구
• /
• s.20
• /
• pp.121-137
• /
• 1999

Among pigment used at work of Dan-Chung, Emerald Green is specific illuminating fluorescent light of green. It is very difficult to change other organic or inorganic pigment. All of the internal high class pigment has rare light. But Emerald Green is superior to fresh color and stability out of industrial chemical products. It forms over 50% of quantity and importance of a pattern painting. Emerald Green prohibited to produce because of its toxicpollutants, so required to changing pigment development. It is characterized to excellent color, convenient work, economical, against-sunlight, against-air pollutant and durability. The result of a test is follows; 1. We are investigated into producing internal natural Emerald Green, import external pigment and industrial synthesis method etc. but unable to buy because of its toxic pollutant. 2. We are made six samples by yellowish and green is hpigment mixing. We tested on against sunlight and air pollutant. The best mixing ratio is follows. Titanium Dioxide R760 : 18g- Chalk, White Wash : 10g- Permanent Yellow : 7g- Cyanine Green : 8g- Chrome Yellow : 3g- Resin(Vehicle) : Acryl Emulsion(Styrene + 2-Ethyl HexylAcrylate + Methyl Meth Acrylate) 8%

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• Journal of Distribution Science
• /
• v.22 no.10
• /
• pp.1-12
• /
• 2024

Purpose: Despite significant commitments between corporations and the government on green supply chain, green logistics and sustainable production, the adoption of green and sustainable trading innovation in Vietnam continues to face many obstacles. The objective of this study is to approach the decision to adopt green and sustainable trading innovation from the perspective of the enterprise. Research Design, Methodology and Approach: A cross-sectional study with the participation of 651 employees and managers at distribution enterprises such as logistics, supply, and delivery enterprises in southern Vietnam was conducted to assess business innovation decisions through innovation awareness. Partial least squares structural equation modelling (PLS-SEM) was proposed to evaluate the structural relationships of the model. Results: The research results show that the decision to innovate an enterprise is directly positively affected by the perception of marketing innovation, process innovation and organizational innovation; in which process innovation and organizational innovation are mediators for the perception of marketing innovation. Conclusions: This study makes a significant contribution by demonstrating the impact of marketing innovation awareness on the entire process that leads to enterprise innovation decisions to fulfil customer expectations and competitive pressure in the context of the green supply chain, green logistics and sustainable production.

• The monthly packaging world
• /
• s.192
• /
• pp.42-43
• /
• 2009