• 한국안전학회지
• /
• 제19권2호
• /
• pp.104-111
• /
• 2004

The aim of this study was to investigate the influence of inorganic pigments on the physical properties of cement mortar. For this purpose, the compressive strength and absorption test were carried out on cement mortar imxed with inorganic pigments by changing the proportion of cement mortar, water-cement ratio, and ratio of pigment. The result of this study can be summarized as follows: the compressive strength of colored mortar rapidely increased in red and yellow mortar, as the mix ratio of pigment increased. In case of green and black mortar, however, the compressive strength decresed as the mix ratio incresed. In case of red and yellow mortar, the absorption of colored mortar increased as the mixing ratio increased, if the mean particle diameter of the pigment is small. In case of green and black mortar, the absorption ratio decreased as the mix ratio increased. After investigating the overall physical properties of colored mortar, it was confirmed that the proper mix ratio of pigment securing the properties of colored mortar was below 6% of the weight of the cement to be used.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권6호
• /
• pp.35-42
• /
• 2006

본 연구는 시멘트/Fe(II) 시스템에서 TCE의 환원성 탈염소화에 관여하는 유효반응성분을 규명하기 위하여 수행되었다. 먼저 시멘트 자체에 존재하거나 혹은 그 수화물에 존재하는 성분을 다량 함유하고 있는 hematite(${\alpha}-Fe_2O_3$), lepidocrocite(${\gamma}$-FeOOH), akaganeite(${\beta}$-FeOOH), ettringite($Ca_6Al_2(SO_4)_3(OH)_{12}$)를 대상으로 TCE 분해실험을 수행하여 이러한 물질이 시멘트/Fe(II) 시스템에서 탈염소반응에 관여할 수 있는지 고찰한 결과, hematite가 잠재적 유효반응성분으로 선정되었다. 각 시스템의 반응속도상수를 비교해 본 결과 200 mM Fe(II)에 hematite와 CaO를 1 : 4(몰비)로 주입한 시스템($k\;=\;0.637\;day^{-1}$)이 기존의 cement와 Fe(II)을 이용한 경우($k\;=\;0.645\;day^{-1}$)와 가장 비슷한 동력학적 분해경향을 보인다는 것을 알 수 있었다. 처음에 pH 조절이 주목적으로 주입되었던 CaO 역시 분해반응에서 중요한 역할을 담당하는 것으로 나타났는데, CaO 첨가량이 증가할수록 hematite/CaO/Fe(II) 시스템의 분해능은 증가하다가 CaO 양이 일정 수준에 다다르면 증가세가 둔화되는 경향을 보여 주었다. SEM(Scanning Electron Microscopy) 분석을 통해서는 hematite/CaO/Fe(II) 시스템 내에서 분해능이 커질수록 육각형 판상의 결정이 새롭게 형성된다는 것을 확인 할 수 있었으며 이 결정은 portlandite, green rust($SO_4$), Friedel's salt 등일 가능성이 높은 것으로 판단되었다. 그리고 동일 시료의 XRD(X-Ray Diffraction) 분석을 통해서는 hematite, magnetite/maghemite, green rust($SO_4$)의 존재를 확인할 수 있었다. SEM 및 XRD 분석에서 공통적으로 나타나는 green rust($SO_4$)가 유효반응성분일 가능성이 높다고 판단되었다.

• Advances in concrete construction
• /
• 제14권5호
• /
• pp.341-354
• /
• 2022

Treatment of solid waste building materials is a crucial method of disposal and an area of ongoing research. New standards for the treatment of solid waste building materials are necessary due to multisource features, huge quantities, and complicated compositions of solid waste. In this research, sustainable nanomaterial mixtures containing nano-paper waste (NPW) and nano-metakaolin (NMK) were used as a substitute for Portland cement. Portland cement was replaced with different ratios of NPW and NMK (0%, 4%, 8%, and 12% by weight of cement) while the cement-to-water ratio remained constant at 0.4 in all mortar mixtures. The fresh properties had a positive effect on them, and with the increase in the percentage of replacement, the fresh properties decreased. The results of compressive strength at 7 and 28 days and flexural strength at 28 days show that the nanomaterials improved the strength, but the results of NMK were better than those of NPW. The best replacement rate was 8%, followed by 4%, and finally 12% for both materials. The combination of NMK and NPW as a replacement (12% NMK + 12% NPW) showed less shrinkage than the others because of the high pozzolanic reactivity of the nanomaterials. The combination of NMK and NPW improved the microstructure by increasing the hydration volume and lowering the water in the cement matrix, as clearly observed in the C-S-H decomposition.

• Current Photovoltaic Research
• /
• 제6권2호
• /
• pp.62-67
• /
• 2018

Multi-wire busbar-type bifacial n-type Si solar cells have been used for the fabrication of monofacial and bifacial photovoltaic (PV) module, where bifacial module was equipped with transparent backsheet while monofacial module was prepared using white backsheet. The comparison of six-day accumulated power production obtained from outdoor test under gray cement ground conditions using 60cell monofacial and bifacial PV modules suggested the bifacial gain of over 20% could be achieved. Furthermore, the outdoor evaluation tests of bifacial modules with different ground conditions such as cement (reference), green paint, white paint and green artificial grass, were performed. It turned out white paint showed the best albedo and thus the highest power production, while green paint and artificial grass showed less power generation than cement ground.

• Advances in materials Research
• /
• 제11권2호
• /
• pp.121-146
• /
• 2022

In the recent years, the use of agricultural waste in green cement mortar and concrete production has attracted considerable attention because of potential saving in the large areas of landfills and potential enhancement on the performance of mortar. In this research, microparticles of palm oil fuel ash (POFA) obtained from a multistage thermal and mechanical treatment processes of raw POFA originating from palm oil mill was utilized as a pozzolanic material to produce high-performance cement mortar (HPCM). POFA was used as a partial replacement material to ordinary Portland cement (OPC) at replacement levels of 0, 5, 10, 15, 20, 25, 30, 35, 40% by volume. Sand with particle size smaller than 300 ㎛ was used to enhance the performance of the HPCM. The HPCM mixes were tested for workability, compressive strength, ultrasonic pulse velocity (UPV), porosity and absorption. The results portray that the incorporation of micro POFA in HPCMs led to a slight reduction in the compressive strength. At 40% replacement level, the compressive strength was 87.4 MPa at 28 days which is suitable for many high strength applications. Although adding POFA to the cement mixtures harmed the absorption and porosity, those properties were very low at 3.4% and 11.5% respectively at a 40% POFA replacement ratio and after 28 days of curing. The HPCM mixtures containing POFA exhibited greater increase in strength and UPV as well as greater reduction in absorption and porosity than the control OPC mortar from 7 to 28 days of curing age, as a result of the pozzolanic reaction of POFA. Micro POFA with finely graded sand resulted in a dense and high strength cement mortar due to the pozzolanic reaction and increased packing effect. Therefore, it is demonstrated that the POFA could be used with high replacement ratios as a pozzolanic material to produce HPCM.

• 한국환경과학회지
• /
• 제17권5호
• /
• pp.573-580
• /
• 2008

This study aims to measure and to analyze the characteristics of thermal environment of the various permeable pavement materials such as a break stone pavement (Green block cubic), soil protection pavement (Soil tector), soil cement pavement and ceramic brick pavement under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 9, 2006, $37.1^{\circ}C$) of the year. The albedo was the highest on the break stone pavement(0.8) from 12:00 to 14:00. The albedo of the ceramic brick pavement, a soil tector pavement and soil cement pavement were 0.35, 0.29 and 0.27 from 12:00 to 14:00, respectively. The peak surface temperature and long wave radiation was the highest on the soil protection pavements($56.6^{\circ}C$/627 W/$m^2$). The peak surface temperatures and long wave radiation on the ceramic brick pavement, a stone brick pavement and soil cement pavement were $51.7^{\circ}C$/627 W/$m^2$, $48.8^{\circ}C$/607 W/$m^2$ and $45.9^{\circ}C$/582 W/$m^2$, respectively. The heat environment was better on the break stone pavement than on the other pavements. This is mainly due to the high albedo of the break stone pavement(0.8) while the albedo value of a ceramic brick pavement, a soil tactor pavement and soil cement pavement were 0.35. 0.29 and 0.27. Large heat capacity($2,629kJ/m^3{\cdot}K$) of the stone brick pavements also contributes to this difference. The heat environment was better on the soil cement pavement than the soil tector pavement. This is mainly due to the evaporation of the soil cement pavement while the active evaporation of the soil tactor pavement was not continued after two days from the rainfall event. To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.237-238
• /
• 2009

본 연구에서는 Green SHCC 제조시 사용되는 규사를 대체하기 위하여 순환잔골재 치환율을 변수로 하여 직잡인장성능을 평가하고자 하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.209-210
• /
• 2012

Cement is an essential material for social infrastructure. Cement production process for cement itself is energy-intensive and requires a large amount of natural resources for fuel and raw materials. This study is to development of recycled cement from waste concrete powder in manufacturing process of recycled aggregate concrete. Recycled cement is low carbon and green growth materials concept for eco friendly construction environment. From the test results, waste concrete powder is same chemical proportion regardless of manufacturing process of recycled aggregate concrete.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.349-362
• /
• 2024

High-performance fiber-reinforced cement composites (HPFRCC) are new materials created and used to repair, strengthen, and improve the performance of different structural parts. When exposed to tensile tension, these materials show acceptable strain-hardening. All of the countries of the globe currently seem to have a need for these building materials. This study aims to create a low-carbon HPFRCC (high ductility) that is made from materials that are readily available locally which has the right mechanical qualities, especially an increase in tensile strain capacity and environmental compatibility. In order to do this, the effects of fiber volume percent (0%, 0.5%, 1%, and 2%), and determining the appropriate level, filler type (limestone powder and silica sand), cement type (ordinary Portland cement, and limestone calcined clay cement or LC3), matrix hardness, and fiber type (ordinary and oxygen plasma treated polypropylene fiber) were explored. Fibers were subjected to oxygen plasma treatment at several powers and periods (50 W and 200 W, 30, 120, and 300 seconds). The influence of the above listed factors on the samples' three-point bending and direct tensile strength test results has been examined. The results showed that replacing ordinary Portland cement (OPC) with limestone calcined clay cement (LC3) in mixtures reduces the compressive strength, and increases the tensile strain capacity of the samples. Furthermore, using oxygen plasma treatment method (power 200 W and time 300 seconds) enhances the bonding of fibers with the matrix surface; thus, the tensile strain capacity of samples increased on average up to 70%.

• 자원리싸이클링
• /
• 제20권6호
• /
• pp.71-77
• /
• 2011

용융클링커 제조용 혼합원료 중의 하나로 고로슬래그를 사용하였다. 고로슬래그를 사용한 혼합원료는 용융클링커 제조를 위해 1620에서 용융하였다. 냉각된 클링커는 XRD 패턴으로 클링커 광물의 생성여부를, 색도분석기로 색도를 분석하였다. 용융클링커는 XRD 분석을 통해 OPC 광물과 동등의 클링커 광물을 포함하고 있다는 것을 확인할 수 있었다. 용융시멘트는 OPC보다 백색도가 높아, 색상이 OPC보다 옅게 관찰되었다. 용융시멘트의 LSF 및 SM이 높아짐에 따라 백색도는 낮아졌다. 또한 슬래그를 용융시켜 제조한 시멘트 클링커는 고로 슬래그시멘트보다 백색도가 높았다.