• Journal of Plant Biotechnology
• /
• 제34권1호
• /
• pp.47-53
• /
• 2007

To assess the risk of genetically modified (GM) rice on the agricultural ecosystem, agronomic characteristics, pollen longevity and outcrossing rate between GM (Iksan 483 and Milyang 204) and non-GM (their wild types and female parents) varieties were investigated using the bar gene as a tracer marker in paddy field. The agronomic characteristics of two GM rice were similar to their female-parents (non-GM rice) except heading date and 1,000 grain weight of Iksan 483, and they did not show a difference by the introgression of the bar gene as the genetic traits of rice varieties. Pollen viability was more than 90% just after shedding, and it was rapidly decreased below 50% at 5 minutes after shedding both GM and non-GM varieties. The Pollen longevity was lost after 30 minutes of anthesis. When the distance of gene flow from GM to non-GM rice detected to 6 m from the edge of GM rice plant, the maximum distance of pollen dispersal was 4.5m and 3.9m in Iksan 483 and Milyang 204, respectively, and that was increased in order of west, south, east, and north to the dominant wind direction, west-south. Mean outcrossing rate was very low as 0.003 and 0.001% within 1.5 m from the edge of Iksan 483 and Milyang 204, and the GM hybrids by the pollen dispersal did not detected over 4.5 m from the edge of GM rice plant. The results may help to establish the strategy which reduce the risk of pollen-mediated gene flow between GM and non-GM rice.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.63-71
• /
• 2004

Recently, a sheet forming process of Mg alloys is highlighted again due to increasing demand for Mg wrought alloys in the applications of casings of mobile electronics and outer-skins of light-weight transportation. Microstructure control is essential for the enhancement of workability and formability of Mg alloy sheets. In this research, AZ31 Mg alloy sheets were prepared by hot rolling process and the rolling condition dependency of the microstructure and texture evolution was studied by employing a conventional rolling mill as well as an asymmetric rolling mill. When rolled through multiple passes with a small reduction per pass, fine-grained and homogeneous microstructure evolved by repetitive dynamic and static recrystallization. With higher rolling temperature, dynamic recrystallization was initiated in lower reduction. However with increasing reduction per pass, deformation was locallized in band-like regions, which provided favorable nucleation sites f3r dynamic recrystallization. Through post annealing process, the microstructures could be transformed to more equiaxed and homogeneous grain structures. Textures of the rolled sheets were characterized by $\{0002\}$ basal plane textures and retained even after post annealing. On the other hand, asymmetrically rolled and subsequently annealed sheets exhibited unique annealing texture, where $\{0002\}$ orientation was rotated to some extent to the rolling direction and its intensity was reduced.

• 대한지역사회영양학회지
• /
• 제7권6호
• /
• pp.794-802
• /
• 2002

This study was intended to evaluate the overall effects of nutritional education on adults having two or more symptoms of chronic degenerative disease. A nine week nutritional education program was provided for 65 adults with chronic diseases. We assessed the changes in dietary knowledge, eating behavior and socio-psychological factors. When we evaluated the nutrient intakes of the subjects, their energy intake was 79.4% of the Korean Recommended Dietary Allowances (RDA). Their dietary intake of other nutrients was also below the RDA level except for Vitamin C. Their knowledge of dietary therapy was slightly improved after the implementing of nutritional education. The dietary behavior of ‘night snacks before sleep’was significantly improved. While the overall fear due to disease was significantly increased, self-efficacy was not improved. Self-efficacy for eating “three regular meals” and “choosing fruit, vegetable and grain” were significantly decreased. Family support for “buying food which is good for my health” was also significantly increased, whereas “advises me to eat appropriate foods for health” was decreased. Biochemical analysis indicated that blood levels of triglyceride, cholesterol and blood pressure improved after nutrition education. Therefore, we concluded that nutritional education program for people with chronic degenerative diseases could change the diet therapy knowledge, dietary behavior, and the fear due to disease, support from family and behavior intention toward the direction to improve the chronic disease condition. However, it did not improve self-efficacy. Our study also indicated that nutritional education strategies to improve self-efficacy should be an important aspect in a long term education plan for patients to establish desirable eating habits.

• 한국해양학회지
• /
• 제4권1호
• /
• pp.9-16
• /
• 1969

금번 국내최대의 포항종합제철공장의 건립에 즈으하여 국내최대의 새로운 항만이 영일만내에 건설되고 있다. 항만의 건설의 외곽시설인 방파제 방사제 및 항입구의 배치계획에 기초자료가 된느 여러 조사업무중의 하나로 당 해역의 표사의 이동에 대한 조사가 실시되었다. 항만건설해역은 형산강과 냉천 사이의 해역으로써 이들 하천으로 부터의 유사가 표사이동에 미치는 영양도 아울러 조사되었으며, 표사의 공급원, 표사의 이동방향을 알기 위하여 광범위한 해역에 걸쳐 조사가 진행되었다. 표사는 해안을 따라 어떤 폭을 갖은 해변에서 발생하는 저질의 이동현상을 말하며, 하천의 유사와 마찬가지로 유체에 의한 물질의 운반작용이지만 그 운반기구는 하천의 유사에 비하여 대단히 복잡하여서 그의 정확한 선택파악은 대단히 어려운 문제이다. 최근 이와 같은 조사에 방사성물질이 추적자로 사용되고 있으며, 종래 사용되던 간접적인 방법에 비하여 비교적 간단히 그리고 직접적으로 표사의 실태를 파악할 수 있으미 확인되고 있다. 금번 조사에서는 방사성 추적자로서 Co-60을 사용하였다.

• 한국농공학회지
• /
• 제9권2호
• /
• pp.1301-1305
• /
• 1967

Ground water flow can be studied with model test. Model test of ground water works are necessary for economic and safe design of the works. Also influence of the ground water flow to the durability and safety of hydraulic structures can be studied with this model. a. Sand model ; Water flow through porous media is the principle of sand model. Darcy's formula is the basic equation, $q=k{\frac{dh}{ds}}^{\circ}. The effect of the ground water flow on the grain system itself is represented with this model only. b. Hele-Shaw model ; In this model use is made of the viscous flow analogy. Viscous fluid such as glycerine flowing through two parallel plates depends on Poiseuille law, $q=-c{\frac{dh}{ds}}$. The analogue can be used vertically and horizontally. c. Heat model ; This is based on the analogy of the Fourier's law for heat conduction and Darcy's law for ground water flow. Especially unsteady problem can be studied with this model. A difficulty of the construction of this model is the isolation, which has to prevent losses of the heat. d. Electirc model ; Ohm's law for electric current is analogous to Darcy's law. Resistance material such as metal foil, graphite block, water with salt added, gelatine with salt added, ete. is connected to electric sources and resistor, and equi-voltage line is detected with galvanometer, $N_aCl$, $CuSo_4$, etc. are used as salt in the model. e. Membrane model ; This model is based on the facts that the deflection of a thin membrane obeys Laplace's equation if there is no load in the direction perpendicular to the membrane, and if the dellection is small.

• 한국작물학회지
• /
• 제53권3호
• /
• pp.297-302
• /
• 2008

Application of genotype by environment ($G\;{\times}\;E$) interaction would be used for identifying optimum test condition of the varietal adaptation in the establishment of breeding purpose. Yield and yield components were used to perform additive main effect and multiplicative interaction (AMMI) analysis. Significant difference for $G\;{\times}\;E$ interaction were observed for all variable examined. For yield, 0.18 of total sum of squares corresponded to $G\;{\times}\;E$ interaction. Correlation analysis was carried out between genotypic scores of the first interaction principal component axis (IPCA 1) for agronomic characters. Significant correlations were observed between IPCA 1 for yield and capsule bearing stem length (CBSL), number of capsule per plant (NOC). The biplot of grain yield means for IPCA1 which accounted for 34% of the variation in total treatment sums of squares showed different reaction according to $G\;{\times}\;E$ interaction, genotypes and environments. Taegu showed relatively lower positive IPCA1 scores, and it also showed smaller coefficient variation of yield mean where it is recommendable as a optimal site for the sesame cultivar adaptation and evaluation trial. In case of variables, Yangbaek and M1 showed relatively lower IPCA1 scores, but the score direction showed opposite each other on the graph. Ansan, Miryang1, Miryang4, and Miryang6 seemed to be similar group in view of yield response against IPCA1 scores. These results will be helpful to select experimental site for sesame in Korea to minimize $G\;{\times}\;E$ interaction for the selection of promising genotype with higher stability.

• 자원환경지질
• /
• 제12권3호
• /
• pp.115-126
• /
• 1979

The Jecheon granite mass has turtle-shape exposure of about $190km^2$ at vicinity of Jecheon-eup, and is elongated in the direction of NEE-SWW. It discordantly intrudes the Bakdalryong metamorphic rocks and the great limestone series(Samtaesan and Hungwolri formation) which belong to the pre-Cambrian and Ordovician, respectively. The mass is composed of five facies of different grain size; texture and charecteristic minerals. The five facies are (1) coarse grained biotite granodiorite, (2) fine grained hornblende biotite granodiorite, (3) coarse grained pink feldspar granodiorite (4) leucogranite, and (5) porphyritic biotite granite. The mutual relationship between each facies is intrusion in (1)-(2) and (2)-(3), but unknown in (3)-(4) and (4)-(5). 22 modal analyses and and 10 chemical analyses on more than a hundred of representative samples taken from the mass are listed as tables. Triangular plot of modal and normative Q-Kf-Pl of this mass show a continuous differentiation products from certain common magma by change of chemical composition and anorthite contents in plagioclase. The metamorphic facies of contact aureole in surrounding rocks adjacent to the granite body are corresponded to hornblende hornfels facies with mineral assemblages of wollastonite-diopside-calcite in calcareous rocks, and of quartz-biotite-muscovite-cordierite in argillaceous rocks. Variation of silica versus oxides of major elements shows that the mass is similar to the trend of Daly's average basalt-andesite-dacite-rhyolite which shows the trend of the fractional crystallization of magma, and is equivalent to the calc-alkali rock series by Peacock. AMF diagram shows that Jecheon granite mass is equivalent to normal diffentiation products such as skaergaard intrusion. The above evidences suggest that the Jecohon granite mass is normal differentiation products formed by fractional crystallization under relatively slow cooling condition.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.269-273
• /
• 2015

The effect of adding Ca on the microstructural and mechanical properties of as-cast Mg-11Li-3Zn-1Sn(wt%) alloys were investigated. Mg-11Li-3Zn-1Sn-0.4Mn with different Ca additions (0.4, 0.8, 1.2 wt%) were cast under an $SF_6$ and $Co_2$ atmosphere at $720^{\circ}C$. The cast billets were homogenized at $400^{\circ}C$ for 12h and extruded at $200^{\circ}C$. The microstructural and mechanical properties were analyzed by OM, XRD, SEM, and tensile tests. The addition of Ca to the Mg-11Li-3Zn-1Sn-0.4Mn alloy resulted in the formation of $Ca_2Mg_6Zn_3$, MgSnCa intermetallic compound. By increasing Ca addition, the volume fraction and size of $Ca_2Mg_6Zn_3$ with needle shape were increased. This $Ca_2Mg_6Zn_3$ intermetallic compound was elongated to the extrusion direction and refined to fine particles due to severe deformation during hot extrusion. The elongation of the 0.8 wt% Ca containing alloy improved remarkably without reduction strength due to the formation of fine grain and $Ca_2Mg_6Zn_3$ intermetallic compounds by Ca addition. It is probable that fine and homogeneous $Ca_2Mg_6Zn_3$ intermetallic compounds played a significant role in the increase of mechanical properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.239-242
• /
• 1998

Ca $F_2$ films have superior gate insulator properties than conventional gate insulator such as $SiO_2$, Si $N_{x}$, $SiO_{x}$, and T $a_2$ $O_{5}$ to the side of lattice mismatch between Si substrate and interface trap charge density( $D_{it}$). Therefore, this material is enable to apply Thin Film Transistor(TFT) gate insulator. Most of gate oxide film have exhibited problems on high trap charge density, interface state in corporation with O-H bond created by mobile hydrogen and oxygen atom. This paper performed Ca $F_2$ property evaluation as MIM, MIS device fabrication. Ca $F_2$ films were deposited at the various substrate temperature using a thermal evaporation. Ca $F_2$ films was grown as polycrystalline film and showed grain size variation as a function of substrate temperature and RTA post-annealing treatment. C-V, I-V results exhibit almost low $D_{it}$(1.8$\times$10$^{11}$ $cm^{-1}$ /le $V^{-1}$ ) and higher $E_{br}$ (>0.87MV/cm) than reported that formerly. Structural analysis indicate that low $D_{it}$ and high $E_{br}$ were caused by low lattice mismatch(6%) and crystal growth direction. Ca $F_2$ as a gate insulator of TFT are presented in this paper paperaper

• 한국재료학회지
• /
• 제26권3호
• /
• pp.154-159
• /
• 2016

A roll-bonding process was applied to fabricate an AA1050/AZ91/AA1050 laminate complex sheet. Two AA1050 and one AZ91 magnesium sheets of 2 mm thickness, 30 mm width and 200 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 2 mm in thickness by conventional rolling. The rolling was performed at 623K without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 15.9 m/min. The AA1050/AZ91/AA1050 laminate complex sheet fabricated by roll bonding was then annealed at 373~573K for 0.5h. The microstructure of the complex sheets was revealed by electron back scatter diffraction (EBSD) measurement; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the complex sheet was found to increase by 11 % and the tensile elongation decreased by 7%, compared to those values of the starting material. In addition, the hardness of the AZ91 Mg region was slightly higher than those of the AA1050 regions. Both AA1050 and AZ91 showed a typical deformation structure in which the grains were elongated in the rolling direction; however, the mis-orientation distribution of grain boundaries varied greatly between the two materials.