• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.223-232
• /
• 2019

Since the actuators with small- scale structures may be exposed to external reciprocal actions lead to create undesirable loads causing instability, the buckling behaviors of them are interested to make reliable or accurate actions. Therefore, the purpose of this paper is to analyze plastic buckling behavior of the micro beam structures by adopting a Conventional Mechanism-based Strain Gradient plasticity (CMSG) theory. The effect of length scale on critical force is considered for three types of boundary conditions, i.e. the simply supported, cantilever and clamped - simply supported micro beams. For each case, the stability equations of the buckling are calculated to obtain related critical forces. The constitutive equation involves work hardening phenomenon through defining an index of multiple plastic hardening exponent. In addition, the Euler-Bernoulli hypothesis is used for kinematic of deflection. Corresponding to each length scale and index of the plastic work hardening, the critical forces are determined to compare them together.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.275-282
• /
• 2017

The Fleck-Hutchinson theory on strain gradient plasticity (SGP), proposed in Adv. Appl Mech 33 (1997) 295, has recently been reformulated by adopting the strategy of decomposing the second order strain presented by Lam et al. in J Mech Pays Solids 51 (2003) 1477. The newly built SGP satisfies the non negativity of plastic dissipation, which is still an outstanding issue in other SGP theories. Furthermore, it explicitly shows how elastic strain gradients and corresponding elastic characteristic length scales come into play in general elastic-plastic loading histories. In this study, the relation between elastic length scales and plastic length scales is investigated by taking wire torsion as an example. It is concluded that the size effects arising when two sets of length scales are of the same order are essentially elastic instead of plastic.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.33-52
• /
• 2015

Based on the Mohr-Coulomb failure criterion, a gradient-dependent plastic model that considers the strain-softening behavior is presented in this study. Both triaxial shear tests on conventional specimen and precut-specimen, which were obtained from an ancient landslide, are performed to plot the post-peak stress-strain entire-process curves. According to the test results of the soil strength, which reduces from peak to residual strength, the Mohr-Coulomb criterion that considers strain-softening under gradient plastic theory is deduced, where strength reduction depends on the hardening parameter and the Laplacian thereof. The validity of the model is evaluated by the simulation of the results of triaxial shear test, and the computed and measured curves are consistent and independent of the adopted mesh. Finally, a progressive failure of the ancient landslide, which was triggered by slide of the toe, is simulated using this model, and the effects of the strain-softening process on the landslide stability are discussed.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.94-102
• /
• 1996

유한변형문제에서 변형구배텐서를 탄소성 성분으로 분해하기 위한 가산분해와 곱분해방법에 대해서 설명하고, 이 두 방법에서 파생되는 역학량들의 의미와 그 차이점을 보였다. 변형구배에 대한 기존의 곱분해와 가산분해로 얻어지는 변형속도구배는 가산적으로 표현되지 않으며, 소성변형속도구배는 탄성변형의 영향을 받고 있다. 본 연구에서는 공축소성 가정을 도입하고, 수정된 곱분해를 통하여 소성변형속도구배가 탄성변형에 영향을 받지 않는 가산적인 변형속도 구배를 얻었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.528-535
• /
• 2011

본 논문에서는 변형율 독립 탄-소성 구성방정식을 이용, 전단 변형 하에서의 국부적 소성변형 집중현상이 분석되었다. 또한 변형량 기울기 (strain gradient) 항이 포함된 비구역적 (non-local) 구성방정식이 유도되었으며 이는 다시 이중후방응력 경화 모델로 표현되었다. 더욱이 본 모델은 연속체 파손역학과 조합되었다. 국부적 변형집중 현상은 수치해석을 통해 분석되었으며 변형량 기울기 항이 구성방정식에 포함될 때 본 항의 크기가 증가할수록 전단 밴드의 크기는 감소하는 것으로 밝혀졌다.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.87-97
• /
• 2004

In gradient-dependent plasticity theory, the yield strength depends on the Laplacian of an equivalent plastic strain measure (hardening parameter), and the consistency condition results in a differential equation with respect to the plastic multiplier. The plastic multiplier is then discretized in addition to the usual discretization of the displacements, and the consistency condition is solved simultaneously with the equilibrium equations. The disadvantage is that the plastic multiplier requires a Hermitian interpolation that has four degrees of freedom at each node. Instead of using a Hermitian interpolation, in this article, a 3-node incompatible (trigonometric) interpolation is proposed for the plastic multiplier. This incompatible interpolation uses only the function values of each node, but it is continuous across element boundaries and its second-order derivatives exist within the elements. It greatly reduces the degrees of freedom for a problem, and is shown through a numerical example on localization to yield good results.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1041-1050
• /
• 2011

미크론 단위의 크기를 갖는 구조물의 소성변형에서 나타나는 길이 효과를 고려하여 유한요소 해석을 하기 위하여 변형률 구배 소성이론을 이용하는 탄소성 유한요소 모델링 및 해석법을 제안하였다. 기존의 연구에서 주로 고차, 고자유도 및 혼합요소, 초 요소 등을 필요로 하였던 것에 비하여 본 논문에서는 이들을 배제하는 변위법 저차 평면 요소 및 삼차원 요소를 도입하였다. 이는 비선형 증분 해석의 프레임워크에서 계산된 소성 변형률의 절점 평균값으로 보간하여 적분점에서의 변형률 구배를 구하고 테일러 전위 모델에 의한 변형률 경화 구성방정식을 적용하므로서 가능하였다. 제안된 방법론은 선형 삼각 및 사각요소, 선형 사면체, 육면체 요소에 대해 적용되었으며 마이크로 굽힘, 마이크로 비틀림, 마이크로 기공과 같은 대표적인 길이 스케일 문제를 통하여 수치적으로 검증하였다. 본 논문에서 제안한 방법은 계산이 매우 쉬우면서도 실험값들과 비교해 볼 때, 변형률 구배 소성이론 즉, 길이 효과를 잘 나타내어 주었다.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.91-96
• /
• 1999

The problems of welding distortion in a welded structures are major concern in heavy industry. Weld-induced angular distortion's formula, composed weld parameter such as heat input and plate thickness, is developed analytically by the use of an elliptic cylindrical inclusion with an eigenstrain in an infinite laminated plate theory. The source of angular distortion in weldments is the plastic strains, which are caused by non-uniform temperature gradient. The distributions of the plastic strain corresponding eigenstrain are assumed by the use of Rosenthal's solution expressing thermal history. Comparison of calculated results with experimental data shows the accuracy and validity of the proposed method.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.621-633
• /
• 2006

To reflect the size effect of material $(1\sim15{\mu}m)$ during plastic deformation of polycrystalline copper, a constitutive equation which includes the strain gradient plasticity theory and intrinsic material length model is coupled with the finite element analysis and applied to plane strain deformation problem. The method of least square has been used to calculate the strain gradient at each element during deformation and the effect of distributed force on the strain gradient is investigated as well. It shows when material size is less than the intrinsic material length $(1.54{\mu}m)$, its deformation behavior is quite different compared with that computed from the conventional plasticity. The generation of strain gradient is greatly suppressed, but it appears again as the material size increases. Results also reveal that the strain gradient leads to deformation hardening. The distributed force plays a role to amplify the strain gradient distribution.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.691-702
• /
• 2013

This review paper summarizes the theory, application, and potential drawbacks of diffusive gradient in thin film (DGT) probe which is a widely used in-situ passive sampling technique for monitoring inorganic contaminants in aquatic environments. The DGT probe employs a series of layers including a filter membrane, a diffusive hydrogel, and an ionic exchange resin gel in a plastic unit. The filter side is exposed to an aquatic environment after which dissolved inorganic contaminants, such as heavy metals and nuclides, diffuse through the hydrogel and are accumulated in the resin gel. After retrieval, the contaminants in the resin gel are extracted by strong acid or base and the concentrations are determined by analytical instruments. Then aqueous concentrations of the inorganic contaminants can be estimated from a mathematical equation. The DGT has also been used to monitor nutrients, such as ${PO_4}^{3-}$, in lakes, streams, and estuaries, which might be helpful in assessing eutrophic potential in aquatic environments. DGT is a robust in-situ passive sampling techniques for investigating bioavailability, toxicity, and speciation of inorganic contaminants in aquatic environments, and can be an effective monitoring tool for risk assessment.