• 멤브레인
• /
• 제17권4호
• /
• pp.381-386
• /
• 2007

니켈입자와 고분자를 함유한 니켈슬러리를 상전환법을 이용하여 중공사 형태로 성형한 후, 소결법을 이용하여 $1,150^{\circ}C$ 환원조건에서 소결하여 금속 필터를 제조하였고 니켈 입자를 표면에 함침한 후, $800^{\circ}C$ 환원조건에서 소결하여 금속 정밀여과막을 제조하였다. 소결조건에 따른 금속 중공사 필터와 정밀여과막의 기공크기, 강도를 살펴보았다. 금속 중공사 정밀여과막은 산, 염기 및 염소에 대한 저항성이 뛰어났으며 역세척에 의한 투수량 회복률이 우수하였다.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.507-527
• /
• 2016

The use of shape memory alloys (SMAs) has been seriously considered in seismic engineering due to their capabilities, such as the ability to tolerate cyclic deformations and dissipate energy. Five 3-D extended end-plate connection models have been created, including one conventional connection and four connections with Nitinol bolts of four different prestress forces. Their cyclic behaviors have been investigated using the finite element method software ANSYS. Subsequently, the moment-rotation responses of the connections have been derived by subjecting them to cyclic loading based on SAC protocol. The results obtained in this research indicate that the conventional connections show residual deformations despite their high ductility and very good energy dissipation; therefore, they cannot be repaired after loading. However, while having good energy dissipation and high ductility, the connections equipped with Nitinol bolts have good recentering capability. Moreover, a connection with the mentioned specifications has been modeled, except that only the external bolts replaced with SMA bolts and assessed for seismic loading. The suggested connection shows high ductility, medium energy dissipation and very good recentering. The main objective of this research is to concentrate the deformations caused by cyclic loading on the connection in order to form super-elastic hinge in the connection by the deformations of the shape memory alloy bolts.

• 대한치과기공학회지
• /
• 제5권1호
• /
• pp.27-30
• /
• 1983

적은 경비로써 보다 양호한 치경부의 적합과 Shade를 얻고 치경부의 변색을 막기 위하여 도재소부용 귀금속과 비금속, 그리고 귀금속과 비금속위에 도금을 하는 4가지 유형으로 나누어 실험하였던 바 다음과 같은 결과를 얻게 되었다. 1. 도재소부용 귀금속으로 치관전체를 주조하는 경우는 수축율이 적고 연성이 뛰어나 경비가 많이 소요된다. 2. 비금속으로 치관전체를 주조하는 경우는 경비는 저렴하나 치경부의 적합성이 금속에 따라 차이가 있으며 그 중 Gemini II가 가장 우수하였다. 3. 비금속으로 치관 전체를 주조하고 10K의 Gold로 도금하는 경우는 적합성에서는 비금속과 동일하나 도금이 고리게 되지 않고 Shade에서도 별 효과가 없었다. 4. 치관의 윗부분은 비금속으로 먼저 주조하여 Degassing한 후 나머지 2mmwjd도의 치경부를 귀금속으로 주조하는 경우는 치경부의 적합성은 귀금속과 동일하게 우수하고 경비 또한 매우 저렴하였다.

• 한국환경복원기술학회지
• /
• 제5권3호
• /
• pp.31-39
• /
• 2002

The main purpose of this study is to select the appropriate wild plants on the rooftop. For the purpose of the experiments, 14 wild plants(12 korean native wild plants and 2 naturalized wild plants) were chosen. As the results of the experiments, the wild plants growing on the culture soil(perlite) Among the 14 kinds of wild plants, such as Chrysanthemum boreale, Taraxacum mongolicum, Aster Koraiensis, Aster yomena, Oenothera odorata, Oenothera lamarckiana, Patrinia scabiosaefolia showed good effects on growth of above ground parts. Therefore, these plants will effective for the rooftop revegation. Callistephus chinensis and Lotus corniculatus var. Japonicus showed good height growth, wherase covering rate was worst. Chrysanthemum boreale, Platycodon grandiflorum, Patrinia scabiosaefolia were plant height, wherase covering rate was not good. As the results of the experiments, the wild plants growing on the culture soil(vermiculite) Taraxacum mongolicum, Aster Koraiensis, Oenothera lamarckiana, Aster yomena showed good effects on growth of above ground parts. Consequently, korean native wild plants such as Taraxacum mongolicum, Aster Koraiensis, Aster yomena and naturalized wild plants such as Oenothera odorata, Oenothera lamarckiana were effective wild plants for rooftop revegetation.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.49-55
• /
• 2008

The disadvantage of PMM's (polymer-modified mortars) that are currently on the market is the utilization of expensive polymer additives and also the cost of the other components. One of the possibilities how to decrease this price is the effective utilization of waste materials which are very inexpensive in spite of their good properties. The combinations of different degree in polymer adhesiveness and waste secondary raw materials - fly ash - are experimentally verified in the paper. The use of fly ash in adhesive materials for ceramic tiles is limited by unsatisfactory initial adhesiveness to sintered ceramic sherd as a result of a running pozzolanic reaction that lowers the efficiency of polymer additives. On the other hand, the use of adhesive and backfill coating materials for gluing ETICS board insulation materials has brought very good results.

• Earthquakes and Structures
• /
• 제11권2호
• /
• pp.315-326
• /
• 2016

This paper presents the results of cyclic loading tests on concrete beams reinforced with various reinforcement, including ordinary steel bars, CFRP bars and CFRP prestressed concrete prisms(PCP). The main variable in the test program was the level of prestress and the cross section of PCP. The seismic performance indexes including hysteretic loops, skeleton curve, ductility, energy dissipation capacity and stiffness degradation were analyzed. The results show that the CFRP prestressed concrete prisms as flexural reinforcement of concrete beams has good seismic performance. And the ductility and the energy dissipation capacity were good, the hysteresis loops were full and had large area.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.342-342
• /
• 2006

Atomic force microscope (AFM) enables us to stretch a single polymer chain by picking it at its two modified termini. Using this method called "nanofishing," we have studied statistical properties of single polymer chains. A force-extention curve obtained for a polystyrene with thiol termini in a cyclohexane showed a good agreement with a worm-like chain (WLC) model, and thus gave microscopic information about entropic elasticity. In this report, the experiments were performed at wide-range temperatures, resulting in wide-range solvent qualities from poor to good solvent condition. The temperature dependence of statistical properties of polystyrene was examined. The coil-strand transformation realized in a poor solvent was also discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1881-1883
• /
• 2001

We manufactured a micro CPL by LlGA process, a new conceptual ultra-fine and precise forming method, using X-ray lithography process. We fabricated a BN X-ray mask having properties of good X-ray transmittance and large mechanical strength. Micro CPL was manufactured by dividing into an upper plate and a low plate. Each of plates was bonded by Ag paste screen printing. The upper plate was fabricated on glass wafer to observe flow and phase transformation of cooling solution. The lower plate was manufactured by Cu electroplating for good heat transmission. Precision of inner Parts, micro pin and micro channel, of manufactured micro CPL is under ${\pm}2{\mu}m$.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.411-417
• /
• 2008

A group of new N,N-bis(5-acetylpyridin-2-yl)phenylamine derivatives was synthesized in good yield applying an optimized Buchwald-Hartwig amination protocol. The synthesized compounds showed UV absorption maxima in the range of 320-360 nm, and showed good luminescence at dilute concentrations in the blue region of the spectra (in the range of 480-497 nm). They showed also a bathochromic shift associating the increase in solvent polarity. The synthesized compounds could be investigated for use in OLEDs or as potential monomers for PLEDs.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.144-147
• /
• 2002

In this study, springback analysis of side rear member is carried out. Side rear member is one of the parts which shows severe springback problems. Forming, trimming, flanging and springback stages can be analyzed successively. From forming analysis, we identified the possible spots in which tearing may occur and can prevent failure. In springback analysis we used the boundary conditions same as applied to the blank on the checker so that the computational result can be compared with experimental one. Form .the comparison, springback analysis can yield relatively good results in a qualitative sense. However, in order to get good deformation result quantitatively, there still remains unsettled tasks in the forming analysis with very small die radius. It is found that we have to develop the element with better bending characteristics and precise contact treatment.