• 대한수학회보
• /
• 제49권1호
• /
• pp.155-163
• /
• 2012

Let E be an elliptic curve over $\mathbb{Q}$. Using Iwasawa theory, we give what seems to be the first general upper bound for the order of vanishing of the p-adic L-function at s = 0, and the $\mathbb{Z}_p$-corank of the Tate-Shafarevich group for all sufficiently large good ordinary primes p.

• 대한수학회보
• /
• 제50권2호
• /
• pp.407-416
• /
• 2013

Let E be an elliptic curve over $\mathbb{Q}$ and $p$ be a prime of good supersingular reduction for E. Although the Iwasawa theory of E over the cyclotomic ${\mathbb{Z}}_p$-extension of $\mathbb{Q}$ is well known to be fundamentally different from the case of good ordinary reduction at p, we are able to combine the method of our earlier paper with the theory of Kobayashi [5] and Pollack [8], to give an explicit upper bound for the number of copies of ${\mathbb{Q}}_p/{\mathbb{Z}}_p$ occurring in the $p$-primary part of the Tate-Shafarevich group of E over $\mathbb{Q}$.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 5월 학술대회지
• /
• pp.123-126
• /
• 2003

We discuss how to reduce the number of inverse matrix and its dimensions requested in MLLR framework for speaker adaptation. To find a smaller set of variables with less redundancy, we employ PCA(principal component analysis) and ICA(independent component analysis) that would give as good a representation as possible. The amount of additional computation when PCA or ICA is applied is as small as it can be disregarded. The dimension of HMM parameters is reduced to about 1/3 ~ 2/7 dimensions of SI(speaker independent) model parameter with which speech recognition system represents word recognition rate as much as ordinary MLLR framework. If dimension of SI model parameter is n, the amount of computation of inverse matrix in MLLR is proportioned to O($n^4$). So, compared with ordinary MLLR, the amount of total computation requested in speaker adaptation is reduced to about 1/80~1/150.

• 전자공학회논문지B
• /
• 제32B권8호
• /
• pp.1091-1098
• /
• 1995

This paper proposes an efficient noiseless encoding method of vector quantization(VQ) index using a dynamic index mapping. Using high interblock correlation, the proposed index mapper transforms an index into a new one with lower entropy. In order to achieve good performance with low computational complexity, we adopt 'the sum of differences in pixel values on the block boundaries' as the cost function for index mapping. Simulation results show that the proposed scheme reduces the average bitrate by 40 - 50 % in ordinary VQ system for image compression. In addition, it is shown that the proposed index mapping method can be also applied to mean-residual VQ system, which allows the reduction of bitrate for VQ index by 20 - 30 %(10 - 20 % reduction in total bitrate). Since the proposed scheme is one for noiseless encoding of VQ index, it provides the same quality of the reconstructed image as the conventional VQ system.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.144-149
• /
• 2017

This study empirically analyzes the effect of IT SME ventures' external information network diversity on their production period reduction and productivity improvement generated from technology development. This research constructs a mediating model based on the open innovation perspective and tests it with the 138 samples of South Korean IT SME ventures based on the ordinary least squares regression. This research is expected to make a good contribution by shedding a new light on the following three points about the critical role of IT SME ventures' external information network diversity in increasing their production period reduction and productivity improvement generated from technology development which has scarcely been illuminated in the extant studies in the field of the management of technology for SMEs. First, IT SME ventures' external information network diversity positively influences their production period reduction. Second, the external information network diversity positively influences IT SMEs' ventures' productivity improvement. Third, IT SME ventures' production period reduction partially mediates the influence of IT SME ventures' external network diversity on their productivity improvement. These three fresh points are expected to provide useful theoretical and practical implications. Related to the theoretical implication, this research provides a fresh implication that IT SME ventures' external information network diversity positively influences not only their production period reduction but also productivity improvement generated from technology development. Concerning the practical implication, this study suggests that the CEOs in IT SME ventures make strategic efforts to use more diverse external information sources in order to increase their production period reduction and productivity improvement generated from technology development.

• 한국통신학회논문지
• /
• 제29권1C호
• /
• pp.65-71
• /
• 2004

본 논문은 주성분분석(PCA, Principle Component Analysis) 혹은 독립성분분석(ICA, Independent Principle Component Analysis)를 이용하여 HMM(Hidden Markov Model) 파라메타의 차수를 감소시킴으로써 MLLR(Maximum Likelihood Linear Regression) 화자 적응 알고리즘을 개선하였다. 데이터의 특징을 잘 나타내는 PCA와 ICA를 통해 모델 mixture component의 상관관계를 줄이고 상대적으로 데이터의 분포가 적은 축을 삭제함으로써 추정해야 하는 적응 파라메타의 수를 줄였다. 기존의 MLLR 알고리즘은 SI(Speaker Independent)모델 보다 좋은 인식성능을 나타내기 위해 30초 이상의 적응 데이터가 요구되었고, 반면 제안한 알고리즘은 적응 파라메타의 수를 감소시킴으로써 10초 이상의 적응데이터가 요구되었다. 또한, 36차의 HMM 파라메타는 기존의 MLLR 알고리즘과 비슷한 인식성능을 나다내는 10차의 주성분이나 독릭성분을 사용함으로써 MLLR 알고리즘에서 적응파라메타를 추정할 때 요구되는 연산량을 1/167로 감소시켰다.

• Steel and Composite Structures
• /
• 제39권5호
• /
• pp.529-542
• /
• 2021

Shear connectors are required to build composite (concrete and steel) beams. They are placed at the interface of concrete and steel to transfer shear and normal forces between two structural components. Such composite beams are sensitive to provide structural integrity when exposed to fire as they loss strength, stiffness, and ductility at elevated temperature. The present study is designed to investigate the shear resistance and the failure modes of the headed stud shear connectors at fire exposure and post-fire exposure. The study includes ordinary concrete and concrete with carbon nanotubes (CNTs) to build composite (concrete-steel) beams with structural steel. Experimental push tests were conducted on composite beams at ambient and elevated temperatures, such as 200, 400 & 600℃. Moreover, push tests were performed on the composite beams after being exposed to 200, 400 & 600℃. Push test results illustrated the reduction of ultimate shear capacity and stiffness of headed stud shear connectors as the temperature increased. Although similar values of ultimate shear were obtained for the headed stud connectors in both ordinary and CNT concrete, the CNT modified concrete reduced the concrete spalling and cracking compared to ordinary concrete and was observed to be effective at temperatures greater than 400℃. All specimens showed a lower shear resistance at fire exposures compared to the corresponding post-fire exposures. Moreover, numerical simulation by Finite Element (FE) analyses were carried out at ambient temperature and at fire conditions. The FE analysis results show a good agreement with the experimental results. In the experimental studies, failure of all specimens occurred due to shear failure of headed stud, which was later validated by FE analyses using ABAQUS.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.452-456
• /
• 2003

본 논문은 화자 적응시 화자 독립 모델의 차수를 줄이고 MLLR (Maximum Likelihood Linear Regression) 알고리즘에서 요구되는 역행렬 횟수를 줄이는 방법을 제안한다. 주성분분석 (PCA: principal components analysis)과 독립성분분석 (ICA: independent components analysis)을 통해 모델 혼합성분 (mixture component)들간의 상관관계를 줄임으로서 모델의 차수를 감소하였다. 주성분분석 및 독립성분분석에 요구되는 추가 연산량은 화자 독립 모델을 훈련할 때 추가함으로써 화자 적응시에 추가되는 연산량은 극히 미소하다. 36차의 HMM 파라메타 차수를 PCA는 12차, ICA는 10차로 감소하였을 때 기존의 MLLR 적응방법과 유사한 단어 인식률을 나타내었다. 즉, 모델 파라미터의 차수를 n이라고 할 때 기존의 MLLR알고리즘에서 역행열 연산에서 요구되는 연산량은 O(n⁴)에 비례하므로 PCA는 1/81, ICA는 1/167만큼 연산량을 감소하였다.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.56-62
• /
• 2008

The biocompatibility and the fatigue strength of Co-Cr-Mo alloy are excellent, so it is used well for the material of artificial joints. The head of artificial joint needs mirror surface for reduction of abrasive resistance. Mirror finishing of Co-Cr-Mo alloy with geometrically defined single crystal diamond cutting tools is handicapped by micro chipping of tool edge. In general, it is said that the micro chipping of diamond tool is caused by work hardening of Co-Cr-Mo alloy for the cut. In the present research, mirror finishing of Co-Cr-Mo alloy by applying ultrasonic elliptical vibration cutting was carried out. The experimental results show that the micro chipping of diamond tool was suppressed and the tool wear was remarkably reduced as compared with the ordinary diamond cutting without elliptical vibration motion. It was confirmed that the good mirror surface of maximum surface roughness of 25 nmP-V was obtained for the cutting length of about 14 m. It is expected that mirror finishing of Co-Cr-Mo alloy can be achieved by applying ultrasonic elliptical vibration cutting practically.

• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.339-358
• /
• 2014

Exodermic deck systems are new composite steel grid deck systems which have been used in various projects during the past decade. One of the eminent features of this system is considerable reduction in the structure weight compared to the ordinary reinforced concrete decks and also reduction in construction time by using precast Exodermic decks. In this study, dynamic properties of the Exodermic deck bridges with alternative perfobond shear connectors are investigated experimentally. In order to evaluate the dynamic properties of the decks, peak picking and Nyquist circle fit methods are employed. Frequencies obtained experimentally are in good agreement with the results of the finite-element solution, and the experimental results show that the first mode is the most effective mode among the obtained modes. The first four modes are the rigid translational motion modes, and the next two modes seem to be rigid rotational motion modes around a horizontal axis. From the 7th mode onwards, modes are flexible. The range of damping ratios is about 0.5%. Furthermore, the static behavior of the Exodermic decks under a static load applied at the center of the decks was investigated. Failure of the decks under positive bending was punching-shear. The bending strength of the decks under negative bending was about 50 percent of their strength under positive bending. In addition, the weight of an Exodermic deck is about 40% of that of an equivalent reinforced concrete slab.