• Korean Journal of Materials Research
• /
• v.31 no.2
• /
• pp.75-83
• /
• 2021

To cope with automobile exhaust gas regulations, ISG (Idling Stop & Go) and charging control systems are applied to HEVs (Hybrid Electric Vehicle) for the purpose of improving fuel economy. These systems require quick charge/discharge performance at high current. To satisfy this characteristic, improvement of the positive electrode plate is studied to improve the charge/discharge process and performance of AGM(Absorbent Glass Mat) lead-acid batteries applied to ISG automotive systems. The bonding between grid and A.M (Active Material) can be improved by applying the Sand-Blasting method to provide roughness to the surface of the positive grid. When the Sand-Blasting method is applied with conditions of ball speed 1,000 rpm and conveyor speed 5 M/min, ideal bonding is achieved between grid and A.M. The positive plate of each condition is applied to the AGM LAB (Absorbent Glass Mat Lead Acid Battery); then, the performance and ISG life characteristics are tested by the vehicle battery test method. In CCA, which evaluates the starting performance at -18 ℃ and 30 ℃ with high current, the advanced AGM LAB improves about 25 %. At 0 ℃ CA (Charge Acceptance), the initial charging current of the advanced AGM LAB increases about 25 %. Improving the bonding between the grid and A.M. by roughening the grid surface improves the flow of current and lowers the resistance, which is considered to have a significant effect on the high current charging/discharging area. In a Standard of Battery Association of Japan (SBA) S0101 test, after 300 A discharge, the voltage of the advanced AGM LAB with the Sand-Blasting method grid was 0.059 V higher than that of untreated grid. As the cycle progresses, the gap widens to 0.13 V at the point of 10,800 cycles. As the bonding between grid and A.M. increases through the Sand Blasting method, the slope of the discharge voltage declines gradually as the cycle progresses, showing excellent battery life characteristics. It is believed that system will exhibit excellent characteristics in the vehicle environment of the ISG system, in which charge/discharge occurs over a short time.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.567-573
• /
• 2020

The persimmon is commonly cultivated in temperate regions of the world, including China, Korea, Japan, Brazil, Turkey, and Italy. In some Asian cultures, consumers are aware of the health claims related to the persimmon and its functional ingredients. The rich phytochemistry of the persimmon has opened new avenues of research on diet-based regimens designed to cure various ailments. This study was conducted to identify the genotoxicity of immature green persimmon (Diospyros kaki THUNB.) extract (DKA). The bacterial reverse mutation assay, the chromosomal aberration assay, and the mammalian micronucleus test were performed to determine the DKA genotoxicity. The result of the bacterial reverse mutation assay revealed that the DKA did not induce mutagenicity in Salmonella typhimurium TA98, TA100, TA1535, TA1537 and Escherichia coli WP2uvrA with or without metabolic activation of S9 mixture. The oral administration of DKA also caused no significant increase in the number of micronucleated polychromatic erythrocytes or in the mean ratio of polychromatic to total erythrocytes. In addition, DKA did not cause a significant chromosome aberration on CHL cells in the presence or absence of S9 activation. In conclusion, DKA could be considered as a reliable and safe functional food since no toxicity was found under the condition of this study.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2023

As global growth has gradually declined, the Customer to Customer (C2C) market has expanded. And the growth potential of the C2C market is getting higher than in the past. Therefore, in this study, we examined what factors affect the price of used products within the C2C market. In order to examine the factors, we used data provided by Kaggle, which is a data science platform, and Mercari, Japan's largest C2C community marketplace platform. In research methods, the characteristics of the products were selected such as product categories, product status, shipping costs, product brands, and the data were analyzed using a linear mixing model to predict the price of C2C used goods. As a result, the variable that most affected the price was the shipping cost. When the seller paid for the shipping cost, the price would drop more than if the buyer had to pay. This study has been shown that the shipping costs is also an important factor in the used market, which can provide practical implications for customers of real transactions.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.224-242
• /
• 2003

The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

• Journal of the Speleological Society of Korea
• /
• no.74
• /
• pp.23-31
• /
• 2006

(1) Kaeusetgul Cave in Kimnyong-Ri, Jeju-Do, Korea. Kaeuset-gul Cave (KC) is situated in NNE area of the Manjang-gul cave (125m a.s.l.). Kaeuset-gul Cave lies at $126^{\circ}45'22"$ E in longitude and $33^{\circ}33'09"$ N in latitude. The coast belong Kimnyeong-Ri, Kujwa-eup, Jeju-Do. Altitude of the cave-entrance is 10m and length of the cave is 90m. Lava hand-specimens of KC are studied by X-ray fluorescence analysis (XRF). Average major chemical components of specimens from KC is as follows (wt.%); $SiO_2=47.03$, $TiO_2=3.16$, $Al_2O_3=18.41$, FeO*=13.53, MnO=0.14, MgO=5.05, CaO=8.66, $Na_2O=2.81$, $K_2O=0.67$, $P_2O_5=0.55$ in KC. Polarizing microscopic studyindicates that these specimens are described of alkali-basalt. (2) Tachibori Fuketsu (Cave) in Shizuoka Prefecture, Fuji Volcano, Japan Tachibori Fuketsu lies attoward the south in skirt of the Fuji volcano, $138^{\circ}42'04"$ east longitude and $35^{\circ}18'00"$ north latitude. The location of cave entrance is 2745, Awakura, Fujinomiya-shi, Shizuoka Prefecture. The above sea level and length of Tachibori Fuketsu are 1,170m and 82m. Average major chemical components of specimens from cave areas follows (Total 100 wt.%) ; ($SiO_2$=50.52, $TiO_2$=1.69, $Al_2O_3$=15.47, FeO*=13.13, MnO=0.20, MgO=5.97, CaO=9.17, $Na_2O$=2.52, $K_2O$=0.94 and $P_2O_5=0.40).$ Polarizing microscopic study indicates that these specimens may belong to tholeiite-basalt series. According to polarizing microscopic study, Au (Augite), P1 (Plagioclase), and O1 (Olivine) are contained as phenocryst minerals. (3) Gorely Cave in Kamchatka Peninsula, Russia Gorely caldera is located at the southeastern part of Kamchatka Peninsula, about 75km southwest of Petropavlovsk-Kamchatskiy.. Gorely lava caves are situated in NHE area of Mt. Gorely volcano (1829m a.s.1.). One of lava cave (Go-9612=K-1) lies at $158^{\circ}00'22"$ east longitude and $52^{\circ}36'18"$ north latitude. The elevation of cave entrance is about 990m a.s.1. and the main cave extends in the NNW direction for about 50m by 15m wide and 5m in depth. The cave of K-3is near the K-1 cave. "@Lava hand-specimens K-1 and K-3 caves are studied by X-ray fluorescence analysis and polarizing microscopic observation. Average major chemical components of specimens from these caves are as follows (wt.%) ;($SiO_2$=55.12, $TiO_2$=1.25, $Al_2O_3$=16.07, T-FeO* =9.41, MnO=0.16, MgO=5.01, CaO=7.21, $Na_2O$=3.39, $K_2O$=1.92, $P_2O_5$=0.45) and these values indicate that the Gorely basaltic andesite belong to high alumina basalt. Polarizing microscopic study indicates that these specimens are described of Augite andesite.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.553-578
• /
• 2015

The Korean society was forcefully merged with the invasion of Japan in 20th century, and traditional culture of Korea was damaged severely by colonization from Japan. After liberation, Korean society experienced drastic social change with Korean War, and industrial economy and democratic system developed as modernization and democratization occurred. However, Korean traditional culture dissolved more severely as Korean society developed industrial economy and democracy. As criticism of existing Western center of society and the emphasis of cultural identity of non-western regions and third-world, world society preferred exchange of culture of diverse nations and people with each other in advent of postmodernism thoughts in mid-late 20th century. If the cultural identity of Korea was dissolving meanwhile, it was needed to be recovered again. Despite the research in Korean history, language, art, architecture was performed to recover cultural identity of Korea, it did not go in-depth with Korean mythology, for Korean mythology is considered as superstition or savage. Mythology shows subconscious group psychology of people who live in certain specific region. Studying Korean mythology is one of the ways to rediscover cultural identity of Korea. In order for Korean mythology to be known to many people, its stories should be told by media. There were movies, plays, drama, and novels produced based on existing Korean mythology as introduction, then these mythical stories are appear in subculture contents such as recent comics, animation, webtoon, games, and light novels. Then population of game players and webtoon readers increased as dissemination of PC and smart phones, and increasing market scale of subculture contents increased a population of consumers of comics, animation, and light novel. Consumers of sub-culture contents were interested as many of these contents were created, base on Korean mythology. Therefore, this paper is written as research on Korean mythology and its signification in sub-cultural contents which were produced base on Korean mythology.

• Journal of Korean Classical Literature and Education
• /
• no.34
• /
• pp.115-147
• /
• 2017

This paper compared and reviewed the poetic theories and Chinese poems of the Korean author Kim Chang Heup and his Japanese counterpart, Kan Chazan. Kim Chang Heup and Kan Chazan shared largely the same opinions on poetry, and both rejected archaism. First, they did not just copy High Tang poetry. Instead, they focused on the (sometimes trivial) scenery right in front of them, and described the calm feelings evoked by what they had seen. They also adopted a sincere tone, instead of an exaggerated one, because both believed that poetry should be realistic. However the differences between the two poets are also noteworthy. Kim Chang Heup claimed that feelings and scenery meet each other within a literary work through Natural Law, and the linguistic expressions that mediate the two are philosophical in nature. However, Kan Chazan did not use Natural Law as a medium between feelings and scenery. Instead the Japanese writer said the ideal poetical composition comes from a close observation and detailed description of scenery. In sum, while Kim Chang Heup continued to express reason through scenery, Kan Chazan did not go further than depicting the scenery itself. In addition, Kim Chang Heup believed poetry was not only a representation of Natural Law, but also a high-level linguistic activity that conveys a poetic concern about national politics. As a sadaebu (scholar-gentry), he held literature in high esteem because he thought that literature could achieve important outcomes. On the other hand, Kan Chazan regarded it as a form of entertainment, thereby insisting literature had its own territory that is separate from that of philosophy or politics. In other words, whereas Kim Chang Heup considered literature as something close to a form of learning, Kan Chazan viewed it as art. One might wonder whether the poetics of Kim Chang Heup and Kan Chazan reflect their individual accomplishments, or if the characteristics of Chinese poetry that Korean and Japanese poets had long sought after had finally surfaced in these two writers. This paper argued that the two authors' poetics represent characteristics of Chinese poetry in Korea and Japan, or general characteristics of Korean and Japanese literatures in a wider sense. Their request to depict actual scenery in a unique way, free from the ideal model of literature, must have facilitated an outward materialization of Korean and Japanese literary characteristics that had developed over a long time.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}$= 0.05. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.1
• /
• pp.41-56
• /
• 2001

Overview: The purpose of this study was to evaluate the determinants on the correlation between constitution and health promoting lifestyle profile on the workers. Also, the questionnaire on the HPLP (health promoting lifestyle profile) of Walker(1987) and Sa-sang constitution of Lee(l894) were utilized Methods: Data from a representative sample of 652 workers were analyzed Pearson's chi-square test analysis was utilized to test the explanatory causal model and to determine the direct and indirect effects of independent variables on quality of life. Results: Constitutional distribution among exposed group, were Tae-eum In(43.7%), So-eum In(33.6%), and So-yang In(22.7%). The degree of the subjects practicing health promoting lifestyle, on a scale of 1 to 4, is an average of 2.62, personal relations 2.94, self-realization 2.86, stress management 2.71, nutrition 2.68, responsibility for health 2.37, and exercise 2.21, with personal relations earning the highest points and exercise the lowest As for factors influencing health promoting lifestyle, there is significant difference between sex and age. That is female and higher age. On the difference between constitution and health promoting lifestyle, Tae-eum In is the highest all area except personal relations. So-eum In is the lowest all area except responsibility for health. Conclusions: Tae-eum In totally do health promoting lifestyle well but So-eum In relatively not. On the Study we used the HPLP(health promoting lifestyle profile) on the premise that each person's daily life, the attitude and the practice level to the health have an influence on the health. So in the constitution there is a little differences in the consideration and the practice level and health condition will be different. On this study we finish up by knowing about the health promoting lifestyle. But on next time we will have to go on studying about the sign and the comparison with the result of western and oriental medical health examination to the each constitution on carrying out continuously oriental medical health examination.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).