• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.144-147
• /
• 2008

유리밸브는 스프링클러 헤드용으로서 가장 간단하면서도 신뢰성이 높은 기구라 할 수 있다. 본 개발에서 우리는 정밀하게 동작하는 유리밸브를 개발하였다. 유리밸브는 유리앰플과 충진액 그리고 액 내부에 형성된 기포로 구성된다. 개발의 첫 단계는 균일한 유리 앰플의 양산기술 및 설비의 개발이었다. 두 번째 단계는 유리앰플에 충진될 액체의 종류와 형성시킬 기포의 크기에 대한 최적화였다. 액을 충진할 때 균일한 기포크기를 형성시킬 수 있는 양산공정의 개발 역시 어려운 문제 중 하나였다. 개발의 최종 단계는 유리밸브의 표면에 대한 처리를 통해 유리밸브의 파괴역학 제어기술개발이라 할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.688-691
• /
• 1999

Light was of electric lamp was reflected by bulb reflector. In order to improve the efficiency of the electric lamp. it is inevitable that lamp, it is inevitable that improve the reflectance of bulb reflector. Important factors that affect the reflectance of bulb reflector is working pressure, distance between evaporation source to substrate, the situation of surface of glass. etch rate of glass, etc. In this paper. confirmed the effect of etching, working pressure etc. , and its effect for the reflectance of bulb reflector. Especially, concentration of HF in the etching solution and etching time is to be importnace for characteristic of bulb reflector.

• 설비공학논문집
• /
• 제15권9호
• /
• pp.779-785
• /
• 2003

The present work proposed a newly developed fluidized bed-type psychrometer that could be applicable to the high temperature and contaminant gases. The psychrometer is a device that test gas passes through the water in a glass bottle as a bubbly flow to obtain the adiabatic saturation temperature. A fluidized bed-type psychrometer was made and its characteristics were compared with the Assmann Psychrometer. The characteristic time was in the order of a hundred seconds, and decreased for the decrease of the mass of water and the increase of the air flow rate. The air flow rate and the insulation of the glass bottle were definitely important in the accurate measurement of the wet bulb temperature. The error in wet bulb temperature became less than 5 percent of the difference of dry and wet bulb temperatures if the air velocity in the glass bottle was greater than 1.5m/s.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.359-363
• /
• 2002

Several innovations for reducing the bulkiness of glass bulbs for flat and large CRTs have been made and further technologies are being developed by using material and structural approaches. The integrated glass technology based on these innovations will provide a lightweight shallow glass bulb for the realization of a half- depth CRT.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.145-151
• /
• 1997

In this paper, we discuss the cathode ray tube(CRT) glass bulb stress and sagging recovery by the contact band pressure using finite element method. We analyzed the band pressure and stress using contact element method between band and bulb before and after banding process which was conducted to decrease the stress concentration using finite element method, and calculated sagging recovery. The analysis results were confirmed by experiments using strain gauge and sagging recovery test apparatus.

• 한국화재조사학회논문지
• /
• 제11권1호
• /
• pp.31-36
• /
• 2008

본 연구는 현장에서 발생한 가로등 화재에 대한 원인을 규명하기 위한 것으로 검증실험과 다양한 분석을 수행하였다. 이물질이 부착된 250W 메탈할라이드등은 $410.4^{\circ}C$로 급격하게 온도가 상승하였다. 따라서 환기 및 방진에 대한 개선이 요구된다. MH 램프에 의한 열은 발광판에서 유리구, 등기구로 이어지며 확산되었다. 메탈할라이드등의 사고원인은 등기구 내부의 이물질이 침적되어 축열 및 화재로 이어진 것으로 추정되며, 등기구의 설계에 있어서 외부 이물질 또는 분진이 침적되지 않으면서 축열이 되지 않는 구조 개선이 요구된다.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1333-1346
• /
• 1996

As the automation system in manufacturing field works more efficientely, the automation scheme is applied to many areas. In order to reduce the entire manufacturing, cost the design process must be automated. However, design process is so complicated, it is very difficult to construct the design automation system. The axiomatic approach to design provides a general theoretical framework for all design fields, including mechanical design. The key concepts of axiomatic design are : the existence of domains, the characteristic vectors within the domains that can be decomposed into hierarchies through zigzagging between the domains, and the design axioms. Using this approach, the glass bulb design process was analyzed and the design automation software was developed. Through menu display, a user can select or furnish the design input and generate the drawing with ease.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.158-165
• /
• 2002

This Paper deals with the headlamp lens surface temperature distribution of p/c headlamp using the three categories of H4 halogen bulbs. Glass is gradually replaced by P/C for the lens material off vehicle headlamp due to the weight reduction and stream lined body of a vehicle. With this trend, the newly established standards for a headlamp with a P/C lens in Europe requires that the heat generated by a bulb should not distort the lens surface. Also the requirements fur the bulb of a headlamp are being enforced in U.S.A & Europe. However, such requirements are not established yet in Korea. By using three kinds (60/55w, 100/90w, 130/90w) of H4 halogen bulbs in this experiment, the surface temperature distribution and Max. temperature on the lens were measured. The results of this study implies the necessity of requirement fur the bulb off headlamp.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2009년도 춘계학술논문발표회 논문집
• /
• pp.188-193
• /
• 2009

유리벌브는 다양한 자동 소화장치 또는 시설에 신뢰성이 높은 감열체로서 각광받고 있다. 당사는 최근 작동온도가 매우 균일하고 하중강도가 우수한 유리벌브를 개발하였고 양산화에도 성공하였다. 본 논문에서는 당사가 개발한 유리벌브의 품질특성을 소개하고자 한다. 특히 본 연구에서는 화재 감지용 감열체로서 유리벌브의 주요 특성치인 반응시간지수 (RTI)에 대해 비중 있는 연구를 진행하여 유리벌브의 RTI를 결정하는 주요 변수들을 도출하고, 이를 설계에 응용하여 유리벌브의 RTI를 조절할 수 있는 툴로서 개발하였다.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.18-25
• /
• 2016

The incandescent lamp is an electric light fixture with a tungsten filament heated to a high temperature, by passing an electric current through it, until it glows with visible light. The hot filament is protected from oxidation with a glass bulb that is filled with inert gas. The incandescent lamp has fire risk when combustible materials are close to its glass bulb. Because its lamp has the property which converts 90~95 percents of the electric power to heat energy. 2015 national fire statistics show that fires caused by lighting fixtures were 652 cases, and incandescent lamps(44 cases) and halogen lamps(53 cases) accounted for 15 percents in those of high heating light fixtures. Since incandescent lamp fires account for about 45 percents in the high heating light fixture, we could not overlook the fire risks by the incandescent lamp. Although many studies related with those have been conducted, incandescent lamp fires are continuously occurred. This study was carried out to study the fire risk of ignition of wood due to radiant heat of incandescent lamp. Radiant heat flux of the incandescent lamp was predicted by applying point source model, and critical distance for ignition of wood was calculated by applying integral model. The results from this study could applied to fire prevention activities related to light bulb, and it could be used in fire cause investigations related to radiant heat of incandescent lamp.