• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.10
• /
• pp.821-827
• /
• 2003

Reduced-scale experimental study was carried out on the heat flow behavior which flows under the sloped ceiling in underground fire. Temperature and flow velocity were measured to characterize the ceiling jet along the sloped stairway ceiling. The methanol fuel was used as a model fire source giving 2.2 and 3.4 kW, with changing the slope angle of stairway adopting of 15, 25, 35, and 45 deg. Based on the experimental data, excess temperature and velocity along the sloped stairway ceiling were examined which are usefully applicable to estimate the activating conditions of heat detector and sprinkler head mounted on the sloped ceiling. Excess temperature in upper exit of the sloped stairway was also examined to analyze the soffit which delays the smoke diffusion. The result shows that the activating conditions of heat detector and sprinkler in the sloped stairway ceiling have to be considered differently in a point of about 30 deg.

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.69-72
• /
• 1962

Spectrophotometric studies have been made on the solutions of elementary iodine in pyridine and quinoline, in the absence of light. The results shown that triiodide ion is produced in both solutions with different rates, and that triiodide ion behaves differently in both solutions. Iodine reacts slowly with pyridine, giving rise to triiodide ion, which is relatively stable in this solvent, hereas, iodine reacts rapidly with quinoline, forming triiodide ion, which interacts further with the medium at slow rate. It has been thought that the difference of the behavior of triiodide ion in both solutions may be due to the stronger basicity of quinoline than pyridine.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.146-151
• /
• 1992

In this paper, extreme tensions in a snapping cable are studied and systematic parameter studies are made in the selected cable using the clipping-off model. The anticipation of incipient clipping frequencies of a cable are of use in giving an indication of the behavior of cables for marine applications in which large dynamic tension build-up in rough seas may cause the total tension to become negative.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.1
• /
• pp.105-117
• /
• 1996

This study was initiated to investigate (1) whether consumers preferred a specific garment size labeling system and (2) whether consumer's demographic characteristics, clothing behavior, and body size affect their preference of size labeling systems. The survey of consumer's preferences for five size labeling systems included 443 women with 20 to 64 years of age. The result of the survey showed that the subjects' preferences of five size labeling sysems were different significantly. Subjects strongly preferred the old system rather than the revised systems. The subjects least preferred the system with pictogram(system D) and the system with description of the measuring methods of te control dimensions (system E). The subjects/ preference for various garment size labeling systems was different depending on their resident area, educational level, and body size. The garment size labeling system with more information on body measurements (system C) was preferred by the subjects living in the metro city area or subjects having difficulties on purchasing ready-to-wear garments giving reasonable fit. The simplest size labeling system (system A) was strongly preferred by the subjects of low educational level, or the subjects living in the small city.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.848-858
• /
• 2014

In this paper the construction of a model that represents the behavior of an Electric Vehicle is described. Both the mechanical and the electric traction systems are represented using Multi-Bond Graph structural approach suited to model large scale physical systems. Then the model of the controllers, represented with a functional approach, is included giving rise to an integrated model which exploits the advantages of both approaches. Simulation and experimental results are aimed to illustrate the electromechanical interaction and to validate the proposal.

• Journal of Korean Home Economics Education Association
• /
• v.27 no.1
• /
• pp.67-83
• /
• 2015

The purpose of this study was to explore the levels of ethical consumptions and related variables on ethics of adolescents as consumers. This subjects were 552 middle and high school students. The research results are summarized as follows. 1. The scores to measure ethical consumptions level of the adolescents was ranged from 2.87 to 3.08, which were relatively low. 2. The ethical consumptions(fair-trade product consumption, donation and giving, local consumption and eco-friendly consumption) in demographic variables were found to have significant differences depending on their religion, perceived social class, father's education and mother's education. 3. The result of hierarchical regression analysis indicated that consumer education experience, the eco-friendly values, materialism, saving, experiencing mass media on affecting the fair-trade product consumption. The major variables affecting the ethical consumptions in the donation and giving were materialism, consumer education experience, experiencing mass media and the eco-friendly values. The significant variables affecting the local consumption were the eco-friendly values, consumer education experience, materialism, experiencing mass media and saving. The major variables affecting the eco-friendly consumption were the eco-friendly values materialism.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.498-504
• /
• 2014

Particulate nitride composites have been fabricated by sintering the compacted powder of AlN and 5 - 64.3 mol% $Al_2O_3$, with a small addition of $Y_2O_3$ ($Y_2O_3$/AlN, 1 wt%), in 1-atm nitrogen gas at $1650-1900^{\circ}C$. The composites were characterized in terms of sintering behavior, phase relations, microstructure and thermal shock resistance. AlN, 27R AlN pseudopolytype, and alminium oxynitride (AlON, $5AlN{\cdot}9Al_2O_3$) were found to existin the sintered material. Regardless of batch composition, the AlN-$Al_2O_3$ powder compacts exhibited similar sintering behavior; however, the degree of shrinkage commonly increased with increasing $Al_2O_3$ content, consequently giving high sintered bulk density. By increasing the $Al_2O_3$ addition up to ${\geq}50 mol%$, the matrix phase in the sintered material was converted from AlN or 27R to AlON. Above $1850^{\circ}C$, a liquid phase was formed by the reaction of $Al_2O_3$ with AlN, aided by $Y_2O_3$ and mainly existed at the grain boundaries of AlON. Thermal shock resistance was superior in the sintered composite consisting of AlON with dispersed AlN or AlN matrix phase.

• Asia pacific journal of information systems
• /
• v.26 no.3
• /
• pp.367-384
• /
• 2016

Social networking services (SNS) have become a significant platform for Internet users to obtain knowledge and information. Users can share messages mutually via this platform. This kind of sharing enables users to exchange and gain useful information. However, in recent years, the crisis of stickiness has appeared in SNS, calling attention to the social network industry. Relevant professionals explain that the interest of users in sharing knowledge on SNS websites and applications may gradually decrease, eventually leading to users giving it because the platforms utilize simple and uninteresting methods to attract active participation from users. However, factors affecting the knowledge sharing on SNS websites and applications should be identified clearly through studies. Sina Weibo is one of the largest SNS platforms in the world, and studies on the factors affecting knowledge sharing of users could be valuable in addressing this issue. This paper establishes the theoretical analysis model of knowledge sharing in SNS sites and applications, analyzes the factors affecting knowledge sharing on these sites, and proposes the corresponding strategies to address the issues. Using questionnaire surveys on Sina Weibo users, this article will discuss the factors affecting knowledge sharing, and analyze these factors on SNS as well as improve the stickiness of users to achieve the aim of SNS platforms enabling the expansion of the range of users. The study will discuss theoretical foundations and the hypotheses that arise. The method of study will also be discussed. The study concludes with theoretical implications, practical implications, limitations, and future research opportunities. The results of this study could aid researchers in understanding the underlying reasons for social network activities as well as for SNS developers in improving SNS services.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.65-73
• /
• 2000

The behavior of double angle connections is analyzed by 3D finite element method using ABAQUS(ver 5.8). Moment-rotation curves for the connections are generated, as well as stress distribution for angle and bolt. Double angle connections have various angle thickness, gage distance and number of bolt. Parameters, such as initial stiffness, plastic tiffness, reference load and curve shape parameter were obtained by regression method using Richard's formula. These parameter lead to predict nonlinear behavior of double angle connection. Design curves giving the parameters of the moment-rotation curves are generated. These parameters are primarily a function of the angle thickness, gage distance and the number of bolts in the connection. Using these parameters, connection moment and its ratio to the full plastic moment capacity Mp of the beam are calculated.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.37-45
• /
• 2018

This study was conducted to analyze the effects of NCS-based beverage certificate education satisfaction on major satisfaction and job preparation behavior and to suggest an improvement plan. Questionnaire survey was made from May 1, 2018 to June 30, 2018 for the students who specialize in department of hotel tourism at colleges in the metropolitan area, and 271 copies of the total 300 questionnaires were used for analysis. The results of this study showed that hypotheses in this study were analyzed as having a significant positive effect and the results were found to have important effects especially on items such as 'curriculum', 'professor in charge', 'efficacy of certificate', 'type of certificate', 'satisfaction of professor', and 'major professor'. Thus, when operating the beverage certificate education program in the course of department of hotel tourism, the education program must be operated to increase the satisfaction of students by giving priority to the above items. In addition, beverage certificate has significant influence on job preparation and major satisfaction and therefore, it should be used as a strategy of student guidance to help improve the satisfaction of the department and the employment rate.