• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.768-773
• /
• 2020

In large-scale land development for the rational use and management of national land resources, the use of geospatial information is essential for the efficient management of projects. Recently, drone LiDAR (Light Detection And Ranging) has attracted attention as an effective geospatial information construction technique for large-scale development areas, such as housing site construction and open-pit mines. Drone LiDAR can be classified into a method using SLAM (Simultaneous Localization And Mapping) technology and a GNSS (Global Navigation Satellite System)/IMU (Inertial Measurement Unit) method. On the other hand, there is a lack of analytical research on the application of drone LiDAR or the characteristics of each method. Therefore, in this study, data acquisition, processing, and analysis using SLAM and GNSS/IMU type drone LiDAR were performed, and the characteristics and utilization of each were evaluated. As a result, the height direction accuracy of drone LiDAR was -0.052~0.044m, which satisfies the allowable accuracy of geospatial information for mapping. In addition, the characteristics of each method were presented through a comparison of data acquisition and processing. Geospatial information constructed through drone LiDAR can be used in several ways, such as measuring the distance, area, and inclination. Based on such information, it is possible to evaluate the safety of large-scale development areas, and this method is expected to be utilized in the future.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.9-21
• /
• 2014

Recently the environment in geospatial information has conversed into the plaform. The platform based geospatial information contributes to save time and cost as well as maintain the consistency and stability in spatial data infrastructure. The Republic of Korea is now constructing and operating the spatial open platform called as the V-World(Virtual World), and searching for the possibility of its abroad export. The purpose of this study is to elicit the abroad export strategy by country of spatial open platform by comparing the cases of developing country, the Kingdom of Cambodia and newly developed country, the Emirate of Abu Dhabi, The Kingdom of Cambodia depends on foreign aids to develop the spatial data infrastructure and the Emirate of Abu Dhabi is inducing an advanced technology and high human power from overseas based on abundant oil money. This study establishes the abroad export strategy based on two country models such as Cambodia and Abu Dhabi by considering the characteristics in geospatial information, and suggests the ways of abroad export and the methods on fund raising for spatial open platform.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2017

On the spatial information open platform, the national spatial data are released to provide services that the people can use freely. Recently, the demand for high quality 3D geospatial information and indoor spatial information is increasing. However, open platform is not able to provide seamless service because spatial data of indoor and outdoor are composed of different formats and storage structures. In addition, the 3D data format used in the current service does not reflect the recent changes in service environment and new technology. Therefore, in this study, we proposed new format of 3D data used in service to improve interoperability and service of open platform 3D data. The proposed format is lighter than the existing format and the rendering speed is improved.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.7-14
• /
• 2022

Unlike general maps, the underground geospatial Information is a system made to view underground information in a 3D shape. This system is managed by a tile maps to lighten the data. But there are various underground structures in the basement, and the structures are made of 3D data, so the data size is large. Therefore, when a client mobile program requests a tile map, the service server fetches the requested tile map from the DB server and transmits ti to the client, but there is a transmission delay time problem. In this paper, we design the tile cache method to improve the request response speed for the tile map data provided to the client in the mobile underground geospatial information system. We propose a method in which a service server predicts and prefetchs the next tile map while the client is viewing tile map, and stores the prefetching data in the memory of client mobile terminal. Then, the transmission delay time problem can be solved.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.193-202
• /
• 2021

Barrier-free is defined as inclusive design of built environments such as building and its facilities that can be approached, entered and used by persons with disabilities. The purpose of this paper develops the content that can identify the physical barriers in the way of movement and provide information associated with barrier-free by using both Geospatial Information and Virtual Reality technology. For this, we conducted literature reviews to find the tackling barriers in terms of barrier-free access and extracted main functions to construct the content. Then, the prototype model which composed of VR engine and 3D geospatial data was implemented, and finally the utilization of the prototype was checked in accordance with barrier-free scenario. The developed prototype model of this study would be contributed to design the barrier-free of public places and access to public buildings for the mobility-disabled people.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.945-951
• /
• 2022

The major objective of this research is to evaluate performance of improved intersections for response time to emergency vehicle preemption. Smart technologies have been introduced to civil infrastructure systems for resilient communities. The technologies need to evaluate their effectiveness and feasibility to confirm their introduction. This research focuses on the performance of emergency vehicle preemption, represented by response time, when smart intersections are introduced in a community. The response time is determined by not only intersections but also a number of factors such as traffic, distance, road conditions, and incident types. However, the evaluation of emergency response has often ignored factors related to emergency vehicle routes. In this respect, this research synthetically analyzes geospatial and incident data using each route of emergency vehicle and conducts before-and-after evaluations. The changes in performance are analyzed by the impact of smart intersections on response time through Bayesian regression models. The result provides measures of the project's performance. This study will contribute to the body of knowledge on modeling the impacts of technology application and integrating heterogeneous data sets. It will provide a way to confirm and prove the effectiveness of introducing smart technologies to our communities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.495-508
• /
• 2017

Today, MMS (Mobile Mapping System) uses the strengths of individual sensor technologies on a variety of platforms to increase the efficiency of geospatial data collection. In this paper, we analyzed the market size and technology trend of mobile mapping market in Korea and abroad, and analyzed frequency, trend, and characteristics of MMS related patents. The results of the analysis are as follows: First, it is expected that the domestic and overseas mobile mapping market will continue to grow in the future, and MMS-related technologies and applications are rapidly developing. Active research and development investment is required to preoccupy future market through technology development and patent competition. Second, the frequency of filing domestic patents is highly correlated with the results of national R&D, and industrial patent applications are highly related to national projects. It is analyzed as the result of introduction of preemptive technologies and research and development of companies for preemption in related industry rather than market development. Lastly, in Korean geospatial information industry survey, It is necessary to maintain the data so that it can be compared with the data of foreign institutions. In particular, statistical data that can grasp the market size in terms of geospatial information utilization and technical aspects are desperately needed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.599-609
• /
• 2008

Development of computer and electronic technology leads innovative progress in spatial informatics and successful commercialization. Geospatial information technology plays an important role in decision making in various applications. However, information display media are two-dimensional plane that limits visual perception. Understanding human visual processing mechanism to percept stereo vision makes possible to implement three-dimensional stereo image display. This paper proposes on-the-fly stereo image generation methods that are involved with various exterior and camera parameters including exposure station, viewing direction, image size, overlap and focal length. Collinearity equations and parameters related with stereo viewing conditions were solved to generate realisitc stereo imagery. In addition stereo flying simulation scenery was generated with different viewing locations and directions. The stereo viewing is based on the parallax principle of two veiwing locations. This study implemented anaglyphic stereogram, polarization and lenticular stereo display methods. Existing display technology has limitation to provide visual information of three-dimensional and dynamic nature of the real world because the 3D spatial information is projected into 2D plane. Therefore, stereo display methods developed in this study improves geospatial information and applications of GIS by realistic stereo visualization.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.427-439
• /
• 2019

Purpose: We generated geospatial information of unmanned aerial vehicle based on various SW and analyzed the location accuracy of orthoimage and DSM and texture mapping of 3D mesh. Method: The same unmanned aerial image data is processed using two different SW, and spatial information is generated. Among the generated spatial information, the orthoimage and DSM were compared with the spatial information generation results of the unmanned aerial photogrammetry SW by performing quantitative analysis by calculating RMSE of horizontal position and vertical position error and performing qualitative analysis. Results: There were no significant differences in the positional accuracy of the orthoimage and DSM generated by each SW, and differences in texture mapping in 3D mesh. The creation of the 3D mesh indicated the impact of the Unmanned Aerial Photogrammetry SW. Conclusion: It is shown that there is no effect of SW on the creation of orthoimage and DSM for geospatial analysis based on unmanned aerial vehicle. However, when 3D visualization is performed, texture mapping results are different depending on SW.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.61-63
• /
• 2010

The R&D of Geospatial Information Infrastructure, which is the one of the KLSG(Korean Land Spatialization Group) mian projects, is core project for promotion of digital korean land. It has been conducted during 4 years, and it will be tested and assessed via TestBed in the 5th & 6th years. The application of Testbed for R&D results will make contributions of stability, enhancement and external reliability for R&D results.