• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.3
• /
• pp.302-309
• /
• 1996

Cavitation erosion-corrosion implies damage to materials due to the shock pressure or shock wave that results when bubbles form and collapse at a metal surface within a liquid. If the liquids corrosive to the material, a condition typically encountered in industry, the component materials may suffer serious damage by a combination of mechanical and electrochemical attack. To suppress cavitation erosion as well as cavitation erosion-corrosion to hydraulic equipments, innovations such as the improvement in the geometric design of the equipment or the selection of suitably resistant construction materials are necessary. This study was tested by using the piezoelectric vibrator with 20kHz, 24${\mu}$m for cavitation generation. And also, the vibratory cavitation erosion-corrosion tests on commercial mild steel SS41were carried out. We carefully observed the erosion pattern and surface photography. The geometrical mechanism of pit growth, which is to be likely these processing; shallow typelongrightarrowundercut typelongrightarrowwide shallow type.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.294-299
• /
• 2003

Using a conventional railway, a tilting train was applied as a means of improving vehicle speed during curve negotiation without any modification of infrastructure. As a study for the optimum design of the tilting mechanism of a tilting vehicle, the kinematics sensitivity of the tilting mechanism was analyzed. Using the geometric relationship of the linkage-type tilting mechanism, the relationship of the parameters and the performance index was defined using nonlinear algebraic equations. With the defined relation, the effect of change in the parameters on the performance was analyzed. The analysis result can be used in the optimum design of a tilting mechanism that considers the track environment, vehicle and operational condition in which the tilting vehicle is applied.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.37-46
• /
• 1994

In metal forming, there ar problems with recurrent geometric characteristics and without explicitly prescribed boundary conditions. In such problems, so-called recurrent boundary conditions must be introduced. The present study deals with nonsteady-state three-dimensional finite element analysis for extrusion of a trocoidal helical gear through a curved die. The boundary-directed remeshing scheme based on the modular remeshing technique is developed to reduce the errors arising in fitting old and new mesh systems. The computed extrusion pressure in reaching the near steady-state loading stage is compared with the results of the experiment and the steady-state analysis. The three-dimensional deformed pattern involving warping at the extruded end due to torsional deformation mode is demonstrated.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• Structural Engineering and Mechanics
• /
• v.6 no.2
• /
• pp.173-183
• /
• 1998

In the shape design of flexible structures, it is useful to predict the initial shape from the desirable large deformed shapes under some loading conditions. In this paper, we present a numerical procedure of an initial shape determination problem for hyperelastic materials which enables us to calculate an initial shape corresponding to the prescribed deformed shape and boundary condition. The present procedure is based on an Arbitrary Lagrangian-Eulerian (ALE) finite element method for hyperelasticity, in which arbitrary change of shapes in both the initial and deformed states can be treated by considering the variation of geometric mappings in the equilibrium equation. Then the determination problem of the initial shape can be formulated as a nonlinear problem to solve the unknown initial shape for the specified deformed shape that satisfies the equilibrium equation. The present approach can be implemented easily to the finite element method by employing the isoparametric hypothesis. Some basic numerical results are also given to characterize the present procedure.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1125-1133
• /
• 2001

Since the surface temperature of the evaporating tube in an ammonia unit cooled is lower than the dew point of atmosphere, the moisture in the atmosphere condenses and the frost grows on the tube. The frost of liquid film decreases the heat transfer rate. The reliable analysis of the heat transfer is required for the prediction of the optimal design of the ammonia unit cooler. For the specific commercial model, the performance was numerical1y estimated for the variation of operating condition and geometric configuration. It is found that there exists an optimum range for the parameters such as mass flow rate of air and refrigerant, humidity, refrigerant quality, fin pitch, the number of step, the number of rows and the pattern of refrigerant path.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.435-440
• /
• 2002

The objective of this study is to analyze the relationship between polarimetric radar backscatters and stand characteristics over the mountainous forest area. L- and P-band full polarimetric airborne SAR data obtained in September 2000 were processed to compare with forest stand maps and ground collected stand variables. After the geometric registration of SAR image, mean radar backscatters were extracted for those ground plots where the stand parameters, such as tree height, DBH, and basal area, were measured during and after the SAR data acquisition. Preliminary analysis was focused on the topographic influence of radar backscattering under the homogeneous forest stand condition. Topographic effects, assessed by the local incidence angles, were different obvious in L-band data while it was not clear with P-band data.

• The Mathematical Education
• /
• v.51 no.4
• /
• pp.377-393
• /
• 2012

The understanding demands the different degree of the understanding according to student's learning situation. In this paper, we investigate what is the foundation for the complete understanding for the generalization in the generalization-process and justification of some concepts or some theories, through a case. We discovered that the completeness of the understanding in the generalization-process and justification requires 'the meaningful-mental object' which can give the meaning about the concept or theory to students. Students can do the generalization-process through the construction of 'the meaningful-mental object' and confirm the validity of generalization through 'the meaningful-mental object' which is constructed by them. And we can judge the whether students construct the completeness of the understanding or not, by 'the meaningful-mental object' of the student. Hence 'the meaningful-mental object' are vital condition for the generalization-process and justification.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.2
• /
• pp.192-199
• /
• 2009

This paper presents the free vibration analysis of a circular plate with a concentric square hole. The boundary condition is the edge of the square hole is free and the outer circular plate is simply supported. Due to the geometric abnormality, this analysis does not permit an exact solution. The present problem deals with the numerical calculation of the natural frequencies and mode shapes of vibration of the structure by independent coordinate coupling method(ICCM). The numerical results show the efficacy of the ICCM and changes in natural frequencies and modes due to the square hole size.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.31-35
• /
• 2002

This paper describes an experiment for three-dimensional positioning for a pair of KOMPSAT stereostrips using the ancillary data and a single ground control point. The photogrammetric model for three-dimensional positioning was performed as follows: first, initialization of orbital and attitude parameters derived from ancillary data; second, adjustment of orbital and attitude parameters for the satellite to minimize the ground position error with respect to a GCP using the collinearity condition; third, determination of actual satellite position; and lastly, space intersection. This model was tested for a pair of stereo strips with 0.6 base-to-height ratio and GCPs identified from a 1:5,000 scale digital map. As the result, the satellite position of offset was corrected by only one GCP and the accuracy for the geometric modeling showed 38.89m RMSE.