• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.171-188
• /
• 2013

Landuse changes and cadastral information error categories in the four major river areas were analyzed for the use of policy data as cadastral re-arrangement of national and public lands would be required, using high-resolution air-photographs and cadastral maps before and after the river development. The study sites were the river areas of 40km around four dams of the Nakdong river where their landuses were changed most. As the results, national and public lands reached 79.9% of land parcels and 93.3% of land areas of the study sites similar with those of the four river areas, 84.3% of land parcels and 85.5% of land areas. The landuse classification of the study sites before the four river development was consisted most of 'river'(71.6%) and 'rice field'(12.3%), but after the development the 'river' was reduced to 42.7% and 'park area'(19.6%) including sport fields and 'mixed lots'(20.8%) were increased. Also, 86.7% of land parcels before the development could be reduced after the development if administrative districts and land ownerships were not considered. Cadastral information error categories can be found as cadastral polygon missing, polygon overlap, location and boundary non-coincidence, small polygon generation, and non-coincidence between cadastral boundary and river boundary. Landuse change monitoring method using air-photographs will be useful to analyze landuse state through fast information aquisition and to manage properties of national and public lands such as river areas.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.141-147
• /
• 2008

Male adults of bean bug, Riptortus clavatus Thunberg (Heteroptera: Alydidae), release aggregation pheromone (AP) attracting both sexes of adult and nymphs, which its egg parasite, Ooencyrtus nezarae (Hymenoptera: Encyrtidae) exploits the pheromone to find host. The AP consists of three components; (E)-2-hexenyl (Z)-3-hexenoate (E2HZ3H), (E)-2-hexenyl (E)-2-hexenoate (E2HE2H), and tetradecyl isobutyrate (TI). We analyzed composition of the pheromone components of bean bugs from different geo graphical locations of Korea and Japan. The attractiveness of different blends of AP components to R. clavatus was also tested in the fields in Jinju, Korea and in Kumamoto, Japan. Composition ratios (E2HZ3H: E2HE2H:TI) of the AP of Jinju and Iksan populations were 1:1.4:0.2 and 1:0.8:0.2, and those of Tsukuba and Kumamoto populations were 1:2.8:0.2 and 1:1.5:0.1, respectively. In field tests, traps baited with ratio of 1:1:1 (E2HZ3H:E2HE2H:TI=16.7:16.7:16.7mg/rubber septum) and 1:1:0.5(E2HZ3H:E2HE2H:TI= 20:20:10mg/rubber septum) attracted significantly greater number of adult bugs than that of 1:5:1 (E2HZ3H:E2HE2H:TI=7.1:35.7:7.1mg/rubber septum).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.267-274
• /
• 2011

In this study, around Jeju area where climatic change is most considerably appearing in Han Peninsula, we prepared sea level rise height caused by sea level rise (Seogwipo 5.6 mm/yr, Jeju 5.3 mm/yr) and a sea level rise scenario for the case when an enlarged typhoon attacks during high water ordinary spring tide, and evaluated flooding area and effect on road and facility using Digital Elevation Model(DEM) and GIS Spatial Analysis Technique. As a result, the flooding areas were shown to be 2.9 $km^2$ in 2040, 5.4 $km^2$ in 2070, and maximum 5.4 $km^2$ in 2100. Analyzing the effect of flooding on each type of road, the local roads(Gun-do) were shown to be mostly affected. The most flood effected facilities were individual houses. Especially, as there is a possibility for casualties to occur due to disaster in Hwabuk-dong because the effect of flooding on individual houses in this area was shown to be high. In addition, flood on port facilities will considerably affect logistic and marine activities. This study is thought to be a basic data which can be utilized for establishment of strategic coping measures and policies of government affiliated organizations through analysis of effect of sea level rise on construction field.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.69-81
• /
• 2015

If one can infer the residential area of SNS users by analyzing the SNS big data, it can be an alternative by replacing the spatial big data researches which result from the location sparsity and ecological error. In this study, we developed the way of utilizing the daily life activity pattern, which can be found from timeline data of tweet users, to infer the residential areas of tweet users. We recognized the daily life activity pattern of tweet users from user's movement pattern and the regional cognition words that users text in tweet. The models based on user's movement and text are named as the daily movement pattern model and the daily activity field model, respectively. And then we selected the variables which are going to be utilized in each model. We defined the dependent variables as 0, if the residential areas that users tweet mainly are their home location(HL) and as 1, vice versa. According to our results, performed by the discriminant analysis, the hit ratio of the two models was 67.5%, 57.5% respectively. We tested both models by using the timeline data of the stress-related tweets. As a result, we inferred the residential areas of 5,301 users out of 48,235 users and could obtain 9,606 stress-related tweets with residential area. The results shows about 44 times increase by comparing to the geo-tagged tweets counts. We think that the methodology we have used in this study can be used not only to secure more location data in the study of SNS big data, but also to link the SNS big data with regional statistics in order to analyze the regional phenomenon.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.165-173
• /
• 2005

Field observations have been conducted to investigate the physical environment around oyster farms in Gamak Bay. Tidal waves near the two channels at the northeast and south of the bay had almost the same amplitudes and phases. Water temperature responded sensibly to the tides, rising at high water and falling at low water, except for the northwest region. The currents more regularly varied in accordance with a tidal period as long as they are at the faster-flowing region. A considerable flow has been found near the seabed of the northwest of the bay, normally known to be a stagnant area, and also the flow was opposite to the surface flow. Average moving speeds and directions of the flow at each station coincided well with patterns of the residual currents computed by Lee ef al. [2004], except for the northwest region. The discrepancy for the northwest region is not clear but it may have resulted from the facts that the computed flow pattern represents only the case of spring tide and in addition, a northwesterly wind prevailed all the observation time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.425-431
• /
• 2020

Recent advancements in industries and technologies have resulted in an increase in the volume of transportation, management, and distribution of logistics. Radio-frequency identification (RFID) technologies have been developed to efficiently manage such a large amount of logistics information. The use of RFID for management is being applied not only to the logistics industry, but also to the power transmission and energy management field. However, due to the limitation of program development capacity, the RFID device is limited in development, and this limitation is vulnerable to security because the existing strong encryption method cannot be used. For this reason, we designed a chaotic system for security with simple operations that are easy to apply to such a restricted environment of RFID. The designed system is a two-dimensional tent map chaotic system. In order to solve the problem of a biased distribution of signals according to the parameters of the chaotic dynamical system, the system has a cryptographic parameter(𝜇₁), a distribution parameter(𝜇₂), and a parameter(𝜃), which is the constant point, ID value, that can be used as a key value. The designed RFID authentication system is similar to random numbers, and it has the characteristics of chaotic signals that can be reproduced with initial values. It can also solve the problem of a biased distribution of parameters, so it is deemed to be more effective than the existing encryption method using the chaotic system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.147-155
• /
• 2015

The existing field survey and aerial photography involve the waste of manpower and economic loss in the coastline survey. To minimize these disadvantages, the digitization for efficient coastline extraction was conducted in this study using the points extracted from the standard coastline of the approximate highest high water and the diverse satellite images (KOMPSAT-3, SPOT-5, Landsat-8 and Quickbird-2), and the comparative accuracy analysis was conducted. The differences between the standard coastline points of the approximate highest high water and the coastline of each satellite were smallest for KOMPSAT-3, followed by Quickbird-2, SPOT-5 and Landsat-8. The significant probability from between the multipurpose applications satellite and Quickbird-2 (significant probability two-tailed) was statistically significant at 1% significance level. Therefore, high-resolution satellite images are required to efficiently extract the coastline, and KOMPSAT-3, from which images are easily acquired at a low cost, will enable the most efficient coastline extraction without external support.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.710-718
• /
• 2017

After Typhoon Chaba (No.18, 2016) collided with Manseongri Beach, a coastal improvement project was carried out since strong external forces such as waves, storm surges and wave-induced currents were observed to cause beach deformation. The shoreline, beach area and beach volume were periodically surveyed. On the basis of this field data, the beach deformation that occurred at Manseongri Beach has been formally described. Over three months after beach nourishment work began, the beaches were gradually stabilized in terms of natural external forces. However, this stabilization was interrupted by Typhoon Chaba. After two months of typhoon weather, the beach returned to a stable state and no changes were observed until one year after the beach recovery work. Just after the typhoon hit, the shoreline receded from the northern side, where no reduction of external forces occurred, while the rear beach area submerged by breakwater advanced. Also, the beach volume decreased by $3,395m^3$ after the typhoon, due to erosion that occurred on the northern beach, with deposition taking place on the southern backshore area. Therefore, it has been concluded that the coastal improvement project undertaken at Manseongri Beach has significantly contributed to conservation in areas of wave-dominant sediment transport.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.199-206
• /
• 2003

Characteristics of the static shift are discussed by comparing the three-dimensional MT inversion with/without static shift parameterization. The galvanic distortion by small-scale shallow feature often leads severe distortion in inverted resistivity structures. The new inversion algorithm is applied to four numerical data sets contaminated by different amount of static shift. In real field data interpretations, we generally do not have any a-priori information about how much the data contains the static shift. In this study, we developed an algorithm for finding both Lagrangian multiplier for smoothness and the trade-off parameter for static shift, simultaneously in 3-D MT inversion. Applications of this inversion routine for the numerical data sets showed quite reasonable estimation of static shift parameters without any a-priori information. The inversion scheme is successfully applied to all the four data sets, even when the static shift does not obey the Gaussian distribution. Allowing the static shift parameters have non-zero degree of freedom to the inversion, we could get more accurate block resistivities as well as static shifts in the data. When inversion does not consider the static shift as inversion parameters (conventional MT inversion), the block resistivities on the surface are modified considerably to match possible static shift. The inhomogeneous blocks on the surface can generate the static shift at low frequencies. By those mechanisms, the conventional 3-D MT inversion can reconstruct the resistivity structures to some extent in the deeper parts even when moderate static shifts are in the data. As frequency increased, however, the galvanic distortion is not frequency independent any more, and thus the conventional inversion failed to fit the apparent resistivity and phase, especially when strong static shift is added. Even in such case, however, reasonable estimation of block resistivity as well as static shift parameters were obtained by 3-D MT inversion with static shift parameterization.