Abstract
The existing field survey and aerial photography involve the waste of manpower and economic loss in the coastline survey. To minimize these disadvantages, the digitization for efficient coastline extraction was conducted in this study using the points extracted from the standard coastline of the approximate highest high water and the diverse satellite images (KOMPSAT-3, SPOT-5, Landsat-8 and Quickbird-2), and the comparative accuracy analysis was conducted. The differences between the standard coastline points of the approximate highest high water and the coastline of each satellite were smallest for KOMPSAT-3, followed by Quickbird-2, SPOT-5 and Landsat-8. The significant probability from between the multipurpose applications satellite and Quickbird-2 (significant probability two-tailed) was statistically significant at 1% significance level. Therefore, high-resolution satellite images are required to efficiently extract the coastline, and KOMPSAT-3, from which images are easily acquired at a low cost, will enable the most efficient coastline extraction without external support.
본 논문에서는 기존의 현지조사 및 항공영상을 통하여 해안선 측량의 인력낭비와 경제적 손실이 발생하게 되고 이를 최소화하기 위하여 약최고고조면의 표준 해안선으로부터 추출한 포인트와 다양한 국내외 위성영상(다목적실용위성 3호, SPOT-5, Landsat-8, Quickbird-2)에서 얻어진 각 영상별 디지타이징 포인트를 활용하여 광범위의 효율적인 해안선을 추출하기 위한 디지타이징을 실시하여 정확도 비교 분석을 실행한다. 약최고고조면의 표준 해안선의 포인트들과 각 위성별 해안선의 차이 값은 다목적실용위성 3호, Quickbird-2, SPOT-5, Landsat-8의 순서로 작게 나타났다. 다목적실용위성 3호와 Quickbird-2 간의 유의성 검증을 통하여 유의확률(양쪽)(significant probability (2-tailed))이 유의수준 1%에서 통계적으로 의미가 있는 값으로 나타났다. 그러므로 효율적인 해안선 추출을 위해서는 고해상도의 위성영상이 필요하고 영상 획득이 용이하면서 가격이 저렴한 다목적실용위성 3호를 사용한다면 국가의 자력으로 가장 효율적인 해안선 추출이 가능하다.