• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.675-691
• /
• 2002

The focus of this work is on the development of large-scale numerical optimization methods for optimal control of steady incompressible Navier-Stokes flows. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. We develop reduced Hessian sequential quadratic programming. Both quasi-Newton and Newton variants are developed and compared to the approach of eliminating the flow equations and variables, which is effectively the generalized reduced gradient method. Optimal control problems we solved for two-dimensional flow around a cylinder. The examples demonstrate at least an order-of-magnitude reduction in time taken, allowing the optimal solution of flow control problems in as little as half an hour on a desktop workstation.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.480-491
• /
• 2016

This study aims to determine the factors associated with preparation for turnover in youth employees, using a data from the Youth Panel 2007-2013. Study population were composed by 17,037 employees and a generalized estimating equations (GEE) using panel logit model was performed. It was identified that socioeconomic(age, sex, level of education, monthly income and type of employment) and work-related factors(perception of difficulties in performing tasks compared to level of education, perception on the Job-Major match, stabilization of employment, autonomy and empowerment of jobs, peer relationship in workplace) were statistically significant variables. Based on the analysis, dissatisfaction on working environment or condition might lead to employees prepare to turnover and it is a series of activities that to improve welfare and find a suitable job for oneself.

• Journal of Korean Academy of Nursing
• /
• v.50 no.4
• /
• pp.631-640
• /
• 2020

Purpose: This study aimed to examine premenstrual symptoms (PMS) of shift nurses and identify the association between PMS, sleep, and occupational stress. Methods: This study was conducted with a secondary data analysis that used data from the Shift Work Nurse's Health and Turnover study. The participants were 258 nurses who were working in shifts including night shifts. PMS, sleep patterns (sleep time and sleep time variability), sleep quality, and the occupational stress of each participant were measured using the Moos Menstrual Distress Questionnaire, a sleep diary, an actigraph, the Insomnia Severity Index, and the Korean Occupational Stress Scale, respectively. Data were analyzed using SPSS 23 and STATA 15.1 to obtain descriptive statistics, Pearson's correlation coefficients, multiple linear regression with generalized estimating equations (GEE) and Baron and Kenny's mediating analysis. Results: The average PMS score, average sleep time, average sleep time variability, average sleep quality score, and average occupational stress score of the participants was 53.95 ± 40.45, 7.52 ± 0.89 hours, 32.84 ± 8.43%, 12.34 ± 5.95, and 49.89 ± 8.98, respectively. A multiple linear regression analysis with GEE indicated that sleep time variability (B = 0.86, p = .001), and sleep quality (B = 2.36, p < .001) had negative effects on nurses' PMS. We also found that sleep quality had a complete mediating effect in the relationship between occupational stress and PMS. Conclusion: These findings indicate that both sleep time variability and sleep quality are important factors associated with PMS among shift work nurses. To improve shift nurses' PMS status, strategies are urgently needed to decrease sleep time variability and increase sleep quality.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.463-469
• /
• 2002

The governing equation and force-displacement rotations of a beam-column element on elastic foundation we derived based on variational approach of total potential energy. An exact static and dynamic 4×4 element stiffness matrix of the beam-column element is established via a generalized lineal-eigenvalue problem by introducing 4 displacement parameters and a system of linear algebraic equations with complex matrices. The structure stiffness matrix is established by the conventional direct stiffness method. In addition the F. E. procedure is presented by using Hermitian polynomials as shape function and evaluating the corresponding elastic and geometric stiffness and the mass matrix. In order to verify the efficiency and accuracy of the beam-column element using exact dynamic stiffness matrix, buckling loads and natural frequencies are calculated for the continuous beam structures and the results are compared with F E. solutions.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.305-316
• /
• 2003

Recently, an iterative algorithm for finding the interior eigenvalues of a definite matrix by CG-type method has been proposed. This method compares to the inverse power method. The given matrices A, and B are assumed to be large and sparse, and SPD( Symmetric Positive Definite) The CG scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for large sparse eigenproblems for smallest eigenvalue. Also, it is very amenable to parallel computations, like the CG method for the linear systems. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. But for parallel computations we need to find an efficient parallel preconditioner. Our candidates we ILU(0) in the wave-front order, ILU(0) in the multi-coloring order, Point-SSOR(Symmetric Successive Overrelaxation), and Multi-Color Block SSOR preconditioner. Wavefront order is a simple way to increase parallelism in the natural order, and Multi-coloring realizes a parallelism of order(N), where N is the order of the matrix. Another choice is the Multi-Color Block SSOR(Symmetric Successive OverRelaxation) preconditioning. Block SSOR is a symmetric preconditioner which is expected to minimize the interprocessor communication due to the blocking. We implemented the results on the CRAY-T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test problem was drawn from the discretizations of partial differential equations by finite difference methods. The results show that for small number of processors Multi-Color ILU(0) has the best performance, while for large number of processors Multi-Color Block SSOR performs the best.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.250-257
• /
• 2011

This paper analyzes characteristic of the three-phase coupled inductor connected to ac source to effectively mitigate the high-frequency circulating current generated in parallel three-phase boost converters. The three-phase coupled inductor analysis presented in this paper uses the three-phase coupled inductor structure and voltage equations. Based on this analysis, the three-phase coupled inductor is added to the conventional low-frequency averaged model. As a result, the novel averaged model which can reduce the low and high-frequency circulating current simultaneously is developed. Using the zero-sequence component of the novel averaged model, each total inductance to the circulating current of the three-phase coupled inductor and line inductor can be obtained. Simulation and experiment results verify the usefulness of three-phase coupled inductor in parallel three-phase boost converters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.997-1002
• /
• 2013

The article is aiming to investigate the thermal-fluidic characteristics of magnetic fluid in a cavity using GSMAC (generalized-simplified marker and cell method). The transport equations of the magnetic fluid are including the continuity equation, momentum equation and energy equation for natural convection and Maxwell equation and magnetization equation of magnetite nano-sized particles motion. In addition, the heat transfer characteristics such as temperatures and Nusselt numbers and flow characteristics such as streamlines and isotherms of the magnetic fluid were analyzed with the intensity and direction of the magnetic fields. As a result, the thermal-fluidic characteristics of the magnetic fluid in a cavity were could be controlled by the intensity and direction of the magnetic fields.

• International Area Studies Review
• /
• v.20 no.1
• /
• pp.3-22
• /
• 2016

In this study, I examine mutual shock spillover effects among interest rate differences, won-dollar foreign exchange change rates, and stock market returns in Korea during the daily sample period from the beginning of 1995 to the October 16, 2015, using the multivariate GARCH (generalized autoregressive conditional heteroscedasticity) BEKK (Baba-Engle-Kraft-Kroner) model framework. Major findings are as follows. Throughout the 6 model estimation results of variance equations determining return spillovers covered from symmetric and asymmetric models of total sample period and two crisis sub-sample periods composed of Korean FX Crisis Times and Global Financial Crisis Times, shock spillovers are shown to exist mainly from stock market return shocks. Stock market shocks including down-shocks from the asymmetric models are shown to transfer to those other two markets most successfully. Therefore it is most important to maintain stable financial markets that a policy design for stock market stabilization such as mitigating stock market volatility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.14-24
• /
• 2018

Several typical hyper-elastic constitutive models that encompass both conventional and advanced ones were investigated for the application of instability problems, including the biaxial tension of a rubber patch and inflation of spherical or cylindrical balloons. The material models included the neo-Hookean model, Mooney-Rivlin model, Gent model, Arruda-Boyce model, Fung model, and Pucci-Saccomandi model. Analyses can be done using membrane equations with particular strain energy density functions. Among the typical strain energy density functions, Kearsley's bifurcation for the Treloar's patch occurs only with the Mooney-Rivlin model. The inflation equation is so generalized that a spherical balloon and tube balloons can be taken into account. From the analyses, the critical material parameters and limit points were identified for material models in terms of the non-dimensional pressure and inflation volume ratio. The bifurcation was then identified and found for each material model of a balloon. When the finite element method was used for the structural instability problems of rubber-like materials, some careful treatments required could be suggested. Overall, care must be taken not only with the analysis technique, but also in selecting constitutive models, particularly the instabilities.

• Journal of Korean Biological Nursing Science
• /
• v.23 no.3
• /
• pp.180-187
• /
• 2021

Purpose: This study aimed to compare breast milk minerals between mothers with gestational diabetes mellitus (GDM) and healthy mothers. Methods: This study was a short-term prospective study to determine the difference in milk minerals of 30 GDM mothers and 30 healthy mothers. Mineral concentrations in breast milk were measured for Na, K, Ca, Mg, and P. The first breast milk was collected on the 5th day after childbirth, while the second one was collected on the 14th day. For the variation of mineral content of breast milk over time between groups, generalized estimation equations were used. Results: The mean age of the GDM group and healthy mother group was 32.56 and 31.17 years old, respectively. Na was significantly higher in GDM mother group (Wild 𝛘²=4.35, p=.037) over time (Wild 𝛘²=21.59, p<.001), and Ca was significantly higher in healthy mother group (Wild 𝛘²=1.77, p=.018) over time (Wild 𝛘²=19.09, p<.001). Mg, P, and K showed a significant difference in time (Wild 𝛘²=18.12, p<.001; Wild 𝛘²=7.73, p=.005; Wild 𝛘²=7.10, p=.008). P was significantly higher in GDM mother group on 5th day of delivery (t=2.08, p=.042). Conclusion: There was a difference in the mineral composition of breast milk between GDM mothers and healthy mothers. Therefore, it is necessary to develop and apply intervention programs such as effective prenatal blood sugar management and postpartum breast massage considering the characteristics of GDM mothers.