• Korean Journal of Veterinary Research
• /
• v.17 no.2
• /
• pp.63-71
• /
• 1977

During the period of March, 1976 to December, 1976, 48 raw milk samples were taken from dairy cows at 48 different dairy farms in Korea analyzed by gas liquid chromatography to determine the seasonal variation of the amount of organochlorine pesticide residues. At the same time 80 market milk, 10 beef and 10 pork samples were analyed by the same procedure for checking residual levels. The results were summarized as follows; 1. Milk samples from 17 dairy farms (36 per cent of tatal) were shown to be contaminated with various organochlorine pesticides. The residua lrate of ${\gamma}-BHC$ in tested samples were 44per cent (14 sam ples) that of aldrine was 28 per cent (9 samples) and those of pp'-DDT, dieldrin and heptachlor were 9.3 percent (3 samples) respectively. 2. In raw milk pp'-DDT, ${\gamma}-BHC$, aldrin, dieldrin and heptachlor were detected, and aldrin, dieldrin and heptachlor were detected in the market milk. Any kinds of organochlorine pesticides were not detected in beef samples but dieldrin and heptachlor were detected in pork samples. Average residual values of aldrin, dieldrin and heptachlor in the market milk were 0.0077 ppm (0.0000~1.1100 ppm), 0.0001ppm (0.0000~0.0500 ppm) and 0.0008 ppm (0.0000~2.0520 ppm), respectively, and those of dieldrin and heptachlor in pork samples were 0.0010 ppm (0.0000~0.0100 ppm) and 0.0033 ppm (0.0000~0.0330 ppm). respectively. 3. Residues of organochlorine pesticides in raw milk were extremely variable; in fact pp'-DDT was detected in milk samples from A, B, C and D districts and endrin was not detected from all districts. The ${\gamma}-BHC$ and dieldrin were detected at the district of A, C and D, aldrin at the districts of A and C and heptachlor at the districts of both A and D. 4. Seasonal trends of residual values of organochlorine pesticides were, in general, noticeable. The residual level was much higher in Spring than in other seasons and showed the tendeney of decrease from spring through summer and autumn generally; in the case of pp'-DDT average residual values were 0.0121 ppm in spring, 0.0022 ppm in summer and not detected in autumn. But in winter ${\gamma}-BHC$ and aldrin residues were increased a little. Residual values in raw milk (when cow are fed on hay and silage) were appeared higher in winter than the other seasons. 5. Residues of organochlorine pesticides in raw milk were not related in respect to hygienic conditions of dairy farms pp'-DDT and heptachlor were, in general, detected in all farms and aldrin was more detected in milk from well sanitated farms than poor sanitated ones.

• Journal of the Korean earth science society
• /
• v.37 no.1
• /
• pp.52-61
• /
• 2016

The purpose of the study was to create a probabilistic seismic hazard map using the input data that reflected the seismo-tectonic characteristics of the Korean Peninsula by applying USGS program (Harmsen (2008). The program was partly modified for the purpose of this study. The uncertainty of input parameters given by specialists was reflected in calculating the seismic hazard values by logic tree method. The general pattern of PGA was quite sensitive and similar to the shape of areal source. The probabilistic seismic hazard map showed the contour distribution of peak acceleration (%g) with 10% probability of exceedance in 5, 10, 20, 50, 100, 250, and 500 years. The result showed that the peak ground acceleration (PGA) values of the northern peninsula were almost half values of the southern peninsula except Hwanghae province. The general trend of the hazard map extended in the direction of NW-SE from Whanghae province to south-eastern regions of the peninsula. The values in northern part of Kangwon province were relatively lower than other areas in the southern peninsula. The maps produced through this study are considered valuable in regulating the seismic safety of the major facilities in the Korean Peninsula.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.137-151
• /
• 2017

The space between urban buildings becomes a waterway during rain events and requires a boundary condition in numerical calculations on grids to separate overland storm flows from building areas. Minimization of the building data distortion as a boundary condition is a necessary step for generating accurate calculation results. A building generalization is used to reduce the distortion of building shapes and areas during a raster conversion. The objective of this study was to provide the appropriate threshold value for building generalization and grid size in a numerical calculation. The impact of building generation on the connectivity of urban storm waterways were analyzed for a general residential area. The building generalization threshold value and the grid size for numerical analysis were selected as the independent variables for analysis, and the number and area of sinks were used as the dependent variables. The values for the building generalization threshold and grid size were taken as the optimal values to maximize the building area and minimize the sink area. With a 3 m generalization threshold, sets of $5{\times}5m$ to $10{\times}10m$ caused 5% less building area and 94.4% more sink area compared to the original values. Two sites representing general residential area types 2 and 3 were used to verify building generalization thresholds for improving the connectivity of storm waterways. It is clear that the recommended values are effective for reducing the distortion in both building and sink areas.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.3
• /
• pp.113-121
• /
• 1998

The widespread use of thin shell structures has created a need for a systematic method of analysis which can adequately account for arbitrary geometric form. Therefore, the stress analysis of thin shell has been one of the more challenging areas of structural mechanics. The analysis of axisymmetric spherical shell is almost an every day occurrence in many industrial applications. A reliable and accurate finite element analysis procedure for such structures was needed. In general, the shell structures designed according to quasi-static analysis may fail under conditions of dynamic loading. For a more realistic prediction on the load carrying capacity of these shell, in addition to the dynamic effect, consideration should also include other factors such as nonlinearities in both material and geometry since these factors, in different manner, may also affect the magnitude of this capacity. The objective of this paper is to demonstrate the dynamic characteristics of spherical Shell. For these purpose, the spherical shell subjected to uniformly distributed step load was analyzed for its large displacements elasto-viscoplastic dynamic response. The results for the dynamic characteristics of spherical shell in the cases under various conditions of base-radius/central height(a/H) and thickness/shell radius(t/R) were summarized as follows: 1. The dynamic characteristics with a/H, 1) As the a/H increases, the amplitude of displacement increased. 2) The values of displacement Dynamic Magnification Factor (DMF) range from 2.9 to 6.3 in the crown of shell and the values of factor in the mid-point of shell range from 1.8 to 2.6. 3) As the a/H increases, the values of DMF in the crown of shell is decreased rapidly but the values of DMF in mid-point of shell is increased gradually. 4) The values of DMF of hoop-stresses range from 3.6 to 6.8 in the crown of shell and the values of factor in the mid-point of shell range from 2.3 to 2.6, the values of DMF of stress were larger than that of displacement. 2. The dynamic characteristics with t/R, 1) With the decrease of thickness of shell decreses, the amplitude of the displacement and the period increased. 2) The values of DMF of the displacement were range from 2.8 to 3.6 in the crown of shell and the values of factor in the mid-point of shell were range from 2.1 to 2.2.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.2
• /
• pp.59-65
• /
• 2011

$CO_2$ Welding which uses $CO_2$ instead of inert gas is most widely used in industrial sites. Welding rod for $CO_2$ Welding is roughly divided into solid wire and flux cored wire. $CO_2$ Welding has higher efficiency than any other welding methods, and also economic and speedy to handle, that's why is used frequently for welding general structures. As most of studies about $CO_2$ Welding are focused on metallurgical changes of successful joints, they developed theories about the change of configuration on weld parts. This study is especially focused on not only the change of configuration on weld parts, but also the change of the penetrating depth through changing the position of welding torch. For inspection, applied AWS A5.20 E70-1 among welding wires and fixed moving angles of torch, but controled the values of voltage and the position of welding. Also Automatic Feed Mechanism is used for exact movement of material, specimen is a piece of steel for general structures. By measuring and analyzing the configuration of sliced section and the values of welding leg length and welding throat after welding, the outcome about the changes turned out.

• Nuclear Engineering and Technology
• /
• v.6 no.4
• /
• pp.231-237
• /
• 1974

For detection and localization of leaks in closed vessels or pipes carrying liquid flow, $^{51}$ Cr-EDTA and $^{51}$ Cr-DTPA were synthesized and, the column and batch equilibrium experiments were carried out. In the column experiment, the recovery of $^{51}$ Cr-EDTA is 100% in quartz sand and 80.9% in steel sawdust, and that of $^{51}$ Cr-DTPA is 77.4% in quartz sand and 6.4% in steel sawdust. The recovery curve. $^{51}$ Cr-DTPA system in steel sawdust does not show a certain plateau, exceptionally. In general, $^{51}$ Cr-EDTA is adsorbed less than $^{51}$ Cr-DTPA. In the batch equilibrium experiment, the distribution coefficients (Kd) and effect of pH were investigated by using quartz sand, montmorillonite, steel sawdust, and mixed cement raw material as media. In general, the Kd values for $^{51}$ Cr-EDTA are lower than that of $^{51}$ Cr-DTPA. The Kd values for $^{51}$ Cr-EDTA are almost zero at pH 6.0, 7.0, and 8.0.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.430-437
• /
• 2016

In general, noise measurement results show larger random ripple than those of the network analyzer. The reason for the lager random ripple of the noise measurements is considered that the general noise measurements uses absolute measured noise powers, while the network analyzer measures using a ratio of the measured powers. In this paper, a novel measurement method of noise correlation matrix using relative noise ratios is proposed. Proposed method measures the five noise powers of DUT for the five input impedance variations and the four relative noise ratios are formed using the five measured noise powers. The four noise ratios are used to compute the noise correlation matrix and noise parameters. The resulting noise parameters for a 0.5 dB attenuator show good agreements with theoretical values calculated by S-parameters. Also, the noise parameters of an active DUT with a noise figure of less than 1 dB are measured and the measured results show a small random ripple as expected and their values are physically acceptable. In conclusion, the proposed method can be applied to the noise parameter measurements for DUT with a noise figure below 1 dB.

• Structural Engineering and Mechanics
• /
• v.9 no.3
• /
• pp.241-256
• /
• 2000

The major sources of energy dissipation in steel frames with partially restrained (PR) connections are evaluated. Available experimental results are used to verify the mathematical model used in this study. The verified model is then used to quantify the energy dissipation in PR connections due to hysteretic behavior, due to viscous damping and at plastic hinges if they are formed. Observations are made for two load conditions: a sinusoidal load applied at the top of the frame, and a sinusoidal ground acceleration applied at the base of the frame representing a seismic loading condition. This analytical study confirms the general behavior, observed during experimental investigations, that PR connections reduce the overall stiffness of frames, but add a major source of energy dissipation. As the connections become stiffer, the contribution of PR connections in dissipating energy becomes less significant. A connection with a T ratio (representing its stiffness) of at least 0.9 should not be considered as fully restrained as is commonly assumed, since the energy dissipation characteristics are different. The flexibility of PR connections alters the fundamental frequency of the frame. Depending on the situation, it may bring the frame closer to or further from the resonance condition. If the frame approaches the resonance condition, the effect of damping is expected to be very important. However, if the frame moves away from the resonance condition, the energy dissipation at the PR connections is expected to be significant with an increase in the deformation of the frame, particularly for low damping values. For low damping values, the dissipation of energy at plastic hinges is comparable to that due to viscous damping, and increases as the frame approaches failure. For the range of parameters considered in this study, the energy dissipations at the PR connections and at the plastic hinges are of the same order of magnitude. The study quantitatively confirms the general observations made in experimental investigations for steel frames with PR connections; however, proper consideration of the stiffness of PR connections and other dynamic properties is essential in predicting the dynamic behavior.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4433-4437
• /
• 2016

Background: Gastric cancer (GC) is the fifth most common cancer worldwide. Since development is usually asymptomatic, it is generally diagnosed at an advanced stage. The value of screening in patients with nonspecific symptoms for GC is controversial. Aim: The study aimed to evaluate whether hematological parameters (platelet count (PC), mean platelet volume (MPV), MPV/PC ratio, red blood cell distribution width (RDW), neutrophil to lymphocyte ratio (NLR), and platelet to lymphocyte ratio (PLR)) are useful markers to differentiate between gastric cancer patients and healthy individuals. Materials and Methods: Sixty-one patients with gastric cancer and sixty-one healthy individuals were enrolled to the survey and retrospective analysis of selected blood parameters were performed. Results: The mean values of PC, MPV, RDW, NLR, and PLR were significantly higher in GC patients compared to the control group. No statistical differences were observed in MPV/PC ratios. Likewise, no significant statistical differences were revealed in values of blood parameters among TNM stage groups. The RDW showed the highest diagnostic specificity and sensitivity. Conclusions: Hematological parameters: PC, MPV, RDW, NLR, PLR have diagnostic power and can discriminate patients with gastric cancer from patients without cancer. Blood parameters compared with clinical symptoms might alert physicians and patients and lead to performancce of upper gastrointestinal endoscopy, the gold standard in gastric cancer screening and therebly increase the early detection of cancer.

• Advances in Traditional Medicine
• /
• v.1 no.1
• /
• pp.45-54
• /
• 2000

Cannabidiol derivatives (1, 2 and 3), and 5-fluorouracil (4, 5-FU) were tested for their growth inhibitory effects against human oral epitheloid carcinoma cell lines (KB) using two different 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and sulforhodamine B protein (SRB) assay. These compounds showed a potent inhibitory activity in vitro in the micromolar range against KB cell lines. In general, the antitumor activity of these compounds (1, 2, 3 and 4) was in a dose-dependent over the micromolar concentration ranges from $1\;{\mu}M\;to\;100\;{\mu}M$. The comparison of $IC_{50}$ values of these compounds in tumor cell lines shows that their susceptibility to these compounds decreases in the following order: CBD > 5-FU > CBDME > CBDDE by the MTT assay and SRB assay. Cannabidiol derivatives (1, 2 and 3), and 5-FU were tested for their cytotoxic effects on NIH 3T3 fibroblasts using two different MTT assay and SRB assay. These compounds exhibited potent cytotoxic activities in vitro in the micromolar range against NIH 3T3 fibroblasts. In general, the cytotoxic activities of these compounds (1, 2, 3 and 4) were in a dose-dependent over the micromolar concentration range $1\;{\mu}M\;to\;100\;{\mu}M$. The comparison of $CD_{50}$ values of these compounds on NIH 3T3 fibroblasts shows that their susceptibility to these compounds decreases in the following order; CBD > 5-FU > CBDDE > CBDME by MTT assay, CBD > 5-FU > CBDME > CBDDE by SRB assay. These results suggest that cannabidiol (1, CBD) retains the most growth-inhibitory activity against KB cell lines.