• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.52-59
• /
• 1999

An experimental study on the grinding temperature, surface roughness and Acoustic Emission(AE) signals was conducted with different shapes of wheel. The grinding characteristics for slotted shapes of wheel changed by width and helical angle, were compared with those by general one. Lower grinding temperature was obtained for 30$^{\circ}$helical angle with 10mm width and Root Mean square(RMS) values of AE signals were lower for slotted shapes rather than general one. Surface roughness characteristics of slotted shapes found to be rough but the value of roughness for 45$^{\circ}$helical angel with 6mm width, represented to similar tendency general one.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.20-23
• /
• 2000

A general solution for determining the storage coefficient from multi-step pumping test recovery data is suggested. This solution is essentially based on the method of Banton and Bangoy (1996), which used single-step pumping test recovery data. The suggested solution can be applied to any-step pumping test recovery data. We have demonstrated the applicability of the general solution to single-, double-, and triple-step pumping and/or step-drawdown test data partially described in Lee and Lee (1999). The estimates of storage coefficient as well as transmissivity are well consistent with the values from other methods for pumping phase data.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.2
• /
• pp.89-96
• /
• 2002

General along-track acceleration was estimated in the KOMPSAT-1 orbit determination process. Several sets of the atmospheric drag and solar radiation pressure coefficients were also derived with the different spacecraft area. State vectors in the orbit determination with the different spacecraft area were compared in the time frame. The orbit prediction using the estimated coefficients was performed and compared with the orbit determination results. The orbit prediction with the different general acceleration values was also carried out for the comparison

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1227-1232
• /
• 2005

This study carried out unconfined compression tests to identify deformation and strength characteristics of clay. The conclusions are presented in the following. (1) The comparison of unconfined compression strengths according to specimen disturbance showed great differences, except for a few data. (2) The comparison of ${E_{50}}'s$ according to specimen disturbance proved that the two values were similar in general. (3) The comparison of strains at the peak according to specimen disturbance showed that non-shaped specimens had been slightly more disturbed in general. (4) The comparison of $E_{50}/q_u$ also suggested that non-shaped specimens had been slightly more disturbed in general.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.832-836
• /
• 1997

An experimental study on the grinding temperature, surface roughness and Acoustic Emission(AE) signal was conducted with different shapes of wheel. The grinding characteristics by slotted shapes of wheel changed by width and helical angle,were compared with those by general one. Lower grinding temperature was obtained for 30 .deg. helical angel with 10mm width and Root Mean Square(RMS) values of AE signals were lower for slotted shapes rather than general one. Surface roughness characteristic of slotted shapes found to be rough,but the value of roughness for 45 .deg. helical angel with 6mm width, represented to similar tendency general one.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.33-38
• /
• 2006

The ATE driver to test a high speed semiconductor chip is designed by using general logic drivers instead of dedicated pin drivers. We have proposed a structure of general logic drivers using FPCA and assured its correct operation by EDA tool simulation. PCB circuit was implemented and Altera FPGA chip was programmed using DDR I/O library. On the PCB, it is necessary to place two resistors connected output drivers near to the output pin to adjust an impedance matching. We confirmed that the measured results agree with the simulated values within 5% errors at room temperature for the input signals with 800Mbps data transfer rate and 1.8V operating voltage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1180-1184
• /
• 2000

The dynamic design analysis method (DDAM) to analyze and evaluate shock response of the equipment system mounted in ships are discussed. Theoretical background of the DDAM based on the general shock response analysis was introduced. Spectrum dip effect between the equipment system and supporting structure was specially focused being peculiar to general shock response analysis. Actual shock design values used in the DDAM were reviewed in their category, general trend and establishing process. Aspects of DDAM analysis using MSC/NASTRAN were shortened. As a conclusion DDAM is regarded as a reasonable way of analysis for the onboard equipment system due to the underwater shock.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.78-84
• /
• 1993

In PMN-pyrochlore phase mixtures, dielectric constant was measured as a function of the volume fraction of pyrochlore phase and considered with general effective media(GEM) equation. For the application of GEM equation to this system, the critical volume fraction(Vc) where connectivity between the perovskite PMN and pyrochlore phase changed from 0-3 to 3-3, was determined based on the each particle size ratio of two phases with microstructural observation. And then the t value was determined from modified percolation powder-law dependence ( K-Kc (V-Vc)t). In the case of applying such values of t and Vc to the GEM equation, which provided a reasonable fit to the measured dielectric constant within the experimental error range.

• The Pure and Applied Mathematics
• /
• v.27 no.1
• /
• pp.43-50
• /
• 2020

We investigate the domain of influence of the local volatility function on the solutions of the general Black-Scholes model. First, we generate the sample paths of underlying asset using the Monte Carlo simulation. Next, we define the inner and outer domains to find the effective volatility region. To confirm the effect of the inner domain, we use the root mean square error for the European call option prices, and then change the values of volatility in the proposed domain. The computational experiments confirm that there is an effective region which dominates the option pricing.

• Communications of the Korean Mathematical Society
• /
• v.37 no.2
• /
• pp.503-520
• /
• 2022

We introduce a new type of fractional derivative, which we call as the right local general truncated M-fractional derivative for α-differentiable functions that generalizes the fractional derivative type introduced by Anastassiou. This newly defined operator generalizes the standard properties and results of the integer order calculus viz. the Rolle's theorem, the mean value theorem and its extension, inverse property, the fundamental theorem of calculus and the theorem of integration by parts. Then we represent a relation of the newly defined fractional derivative with known fractional derivative and in context with this derivative a physical problem, Kirchoff's voltage law, is generalized. Also, the importance of this newly defined operator with respect to the flexibility in the parametric values is described via the comparison of the solutions in the graphs using MATLAB software.