• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.67-85
• /
• 2007

A three-dimensional hydrodynamic model with the fine grid is applied to simulate the barotropic tides, tidal currents, residual currents and salinity dispersions in the Yellow Sea and the East China Sea. Data inputs include seasonal hydrography, mean wind and river input, and oceanic tides. Computed tidal distributions of four major tides($M_2,\;S_2,\;K_1$ and $O_1$) are presented and results are in good agreement with the observations in the domain. The model reproduces well the tidal charts. The tidal residual current is relatively strong around west coast of Korea including the Cheju Island and southern coast of China. The current by $M_2$ has a maximum speed of 10 cm/s in the vicinity of Cheju Island with a anti-clockwise circulation in the Yellow Sea. General tendency of the current, however, is to flow eastward in the South Sea. Surface residual current simulated with $M_2$ and with $M_2+S_2+K_1+O_1$ tidal forcing shows slightly different patterns in the East China Sea. The model shows that the southerly wind reduces the southward current created by freshwater discharge. In summer during high runoff(mean discharge about $50,000\;m^3/s$ of Yangtze), low salinity plume-like structure(with S < 30.0 psu) extending some 160 km toward the northeast and Changjiang Diluted Water(CDW), below salinity 26 psu, was found within about 95 km. The offshore dispersion of the Changjiang outflow water is enhanced by the prevailing southerly wind. It is estimated that the inertia of the river discharge cannot exclusively reach the around sea of Cheju Island. It is noted that spatial and temporal distribution of salinity and the other materials are controlled by mixture of Changjiang discharge, prevailing wind, advection by flowing warm current and tidal current.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.137-147
• /
• 2012

Purpose: Analyze the Effectiveness of Radiation Treatment Planning by dose calculation and optimization algorithm, apply consideration of actual treatment planning, and then suggest the best way to treatment planning protocol. Materials and Methods: The treatment planning system use Eclipse 10.0. (Varian, USA). PBC (Pencil Beam Convolution) and AAA (Anisotropic Analytical Algorithm) Apply to Dose calculation, DVO (Dose Volume Optimizer 10.0.28) used for optimized algorithm of Intensity Modulated Radiation Therapy (IMRT), PRO II (Progressive Resolution Optimizer V 8.9.17) and PRO III (Progressive Resolution Optimizer V 10.0.28) used for optimized algorithm of VAMT. A phantom for experiment virtually created at treatment planning system, $30{\times}30{\times}30$ cm sized, homogeneous density (HU: 0) and heterogeneous density that inserted air assumed material (HU: -1,000). Apply to clinical treatment planning on the basis of general treatment planning feature analyzed with Phantom planning. Results: In homogeneous density phantom, PBC and AAA show 65.2% PDD (6 MV, 10 cm) both, In heterogeneous density phantom, also show similar PDD value before meet with low density material, but they show different dose curve in air territory, PDD 10 cm showed 75%, 73% each after penetrate phantom. 3D treatment plan in same MU, AAA treatment planning shows low dose at Lung included area. 2D POP treatment plan with 15 MV of cervical vertebral region include trachea and lung area, Conformity Index (ICRU 62) is 0.95 in PBC calculation and 0.93 in AAA. DVO DVH and Dose calculation DVH are showed equal value in IMRT treatment plan. But AAA calculation shows lack of dose compared with DVO result which is satisfactory condition. Optimizing VMAT treatment plans using PRO II obtained results were satisfactory, but lower density area showed lack of dose in dose calculations. PRO III, but optimizing the dose calculation results were similar with optimized the same conditions once more. Conclusion: In this study, do not judge the rightness of the dose calculation algorithm. However, analyzing the characteristics of the dose distribution represented by each algorithm, especially, a method for the optimal treatment plan can be presented when make a treatment plan. by considering optimized algorithm factors of the IMRT or VMAT that needs to optimization make a treatment plan.

• Cartoon and Animation Studies
• /
• s.38
• /
• pp.177-194
• /
• 2015

This study that had been conducted two months by a research team of Pusan National University at the request of Korea Manwha Contents Agency in Dec. 2013 is about the statistical analysis on 'Korean Webtoon DB and its Flow Report' which resulted from the complete survey of Korean webtoons which had been published with payment in official media from early 2000 to 2013. Webtoon which means the cartoons published on web has become a typical type of Korean cartoons and has developed into a main industry since 2000s when traditional published cartoons had declined and social environments had changed. Today, it represents cultural contents in Korea. This study collected the webtoons officially published in media with payment, among Korean webtoons having been published from the early 2000s to Jan. Based on the collected data, it analyzed the general characteristics of webtoons, including cartoonists, the number of cartoons, distribution chart of each media, genre, and publication cycle. According to the data analysis and statistics, a great deal of Korean webtoons are still published in main portal websites, but their platform is being diversified and a webtoon's publication cycle tends to be shortened. In terms of genre, traditional popular genres, such as drama, comic, fantasy, and action, are still popular, and the genres of history, sports, and food are on the rise along with a social trend. Regarding webtoon application, such events as relay webtoon and brand webtoon, and a new type of webtoon featuring PPL commercialism appear. Such phenomena can realize the common profits of cartoonists, media, and ordering bodies, and are various trials to test the possibility of webtoons. In addition, what needs to pay attention on in the expansion of webtoons is increasing webtoons for adults. The study subjects are the webtoons published with payment, excluding free webtoons. However, this study failed to collect the webtoons published on the online websites already closed, and the lost information on cartoonists and their lost webtoons, and it is necessary to conduct a complete survey on all webtoons including free ones. Despite the limitations, this study is meaningful in the points that it categorized and analyzed Korean webtoons accoridng to official media, webtoons, cartoonists, and genres and that it provided a fundamental material to understand the current conditions of webtoons. It is expected that this study will be able to contribute to activating more research on webtoons and producing more supplementary data which will be used for the Korean cartoon industry and academia.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.333-361
• /
• 2016

In general, content business companies include animation industry can have benefits, which they have higher incomes when they obtain wider markets. Therefore, they pursue to have diverse windows for content distribution or to reach the foreign markets for dealing their content products with potential customers. It have the greatest value. They can re-invest the incomes to produce their new products, and they can enhance the international competitiveness of their next products. As the results, the companies can have more incomes and wider markets in next business, and it will be the effectiveness of the good cycle of the animation industry. Animation industry has being undergone of its structure changes, more economical chances and viewers' attitudes changes through the all over the industry because of the acceptance of new digital technology. To response the changes or have the new chances from the changes, they should to review the existing system and the law concerned with the animation business as well as having the diverse new plans for supporting the industry like a construction of the online marketplace of Korean animation. It would make the Korean animation companies to meet foreign customers easily by making lower the entrance barrier of the foreign markets. Current Korean government needs to estimate the value of the Korean animation accurately and objectively by concerning its surroundings to support efficiently. However, it is very difficult to estimate the value of the content rightly because of its' intangible and subjective matter. For this, they should analyze the all the data of the information of the Korean animation content by accumulate, open to the public and manage. So if the government makes online marketplace for the Korean animation, which all the Korean animation companies get in, it would be a solution of estimating the value of the Korean animation rightly. In addition, it will be used as the role of archive of the government to lead the industry successfully. As a point of the small size of the Korean animation companies, they are government dependable because of its low budget, so they strongly expect the government to do the right role as the unique knowledge distributor. Therefore, the Korean animation online marketplace would make not only big companies, but also small companies to have the chances to increase the value of their content in the global markets by themselves without economic burdens.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Journal of Korea Water Resources Association
• /
• v.43 no.5
• /
• pp.455-469
• /
• 2010

Changes of geomorphology in alluvial river and vegetation recruitment on its floodplain downstream from dams are investigated both qualitatively and quantitatively focusing on the downstream of Andong dam and Imha dam on the Nakdong River. Results of the analyses of river morphology and bed material in the study site show a general trend of riverbed degradation with a max scour of 3 m and bed material coarsening from pre-dam value of 1.5 mm in D50 to post-dam value of 2.5 mm. Decrease in bed shear stress due to the decrease in flood discharge have caused vegetation recruitment on the once-naked sandbars. As result, the ratio of area of vegetated bars over total area of bars has drastically changed from only 7% in 1971 before the Andong dam (constructed in 1976) to 25% after it, and increased to 43% only three year after the Imha dam (constructed in 1992) and eventually to 74% by 2005. Analysis of the vegetation succession at Wicjeol subreach, one of the three subreaches selected in this study for detailed investigation, has clearly shown a succession of vegetation on once-naked sand bars to a pioneering stage, reed and grass stage, willow shrub and eventually to willow tree stages. At the second subreach selected, two large point bars in front of Hahoe Village seem to have maintained their sand surfaces without a signifiant vegetation recruitment until 2005. The sand bars, however, seem to have been invaded by vegetation recently, which warns river managers to have a countermeasure to protect the sand bars from vegetation invasion in order to conserve them for the historical village of Hahoe. On the other hand, recruitment and establishment of vegetation on the sand bars by artificial disturbance of the river, such as damming, can create an unique habitat of backmarsh in the sandy river, as shown in the case of Gudam Wetland, and may increase the biodiversity as compared with relatively monotonous sand bars. Last, the premise in this study that decrease in flood discharge due to upstream dams and decrease in bed shear stress can induce vegetation recruitment on the naked sand bars in the river has been verified with the analyses of the distribution of dimensionless bed shear stress along the selected cross section in each subreach.

• Journal of the Korean Society of School Health
• /
• v.7 no.1
• /
• pp.45-55
• /
• 1994

The purpose of this study is to contribute to improvement of educational environment by analysing all problems related to environment around the school. To accomplish this purpose, this study was carried out by examining the problems in controlling the areas required for cleanup with 220 teachers in charging the cleanup duties of the primary and secondary schools in Taegu between June 1 and July 15, 1993 and by actually surveying the prejudical business stores around 72 primary schools between August 10 and September 20, 1993. Although most teachers answered to the questionnaires that it is necessary to cleanup the bad environment around the school, the duties of its cleanup tend not to be considered as an important matter. The teachers considered that the most prejudical business store around the school is totally the game room, and in such order as comic books' store, liquor selling shop and causing noise and pollution. 57.3% of total respondents answered that the present cleanup movements have resulted in failure mostly because of both supervising authorities' careless promotion and store owners' excessive commercial transactions. The result of actual survey in environmental and sanitary cleanup area around 72 primary schools showed that the greatest number of 1,258 prejudical stores was the video tapes shop, and then in such order as lodgings, and game rooms, while the number of prejudical store by the schools was 17.5 stores per school on the average which showed a various distribution from zero to 77 places. In general, these prejudical stores were mainly located around the schools in Jung-gu and Seo-gu areas. In addition, it was shown that the more the number of students, the more the number of the prejudical stores. In order to improve the environment around the school, it is necessary to strictly carry out the zoning system relating to the usage of land, to strongly restrict the stores without permit and abnormal stores and to establish the basis asking the city development authorities to go through the environmental evaluation. Moreover, it is absolutely required to make efforts to establish the national right sense of education, and to closely cooperate with the related authorities.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.284-292
• /
• 2016

Water supplied through dental unit waterlines (DUWLs) has been shown to contain high number of bacteria. To reduce the contamination of DUWLs, it is essential to develop effective disinfectants. It is, however, difficulty to obtain proper DUWL samples for studies. The purpose of this study was to establish a simple laboratory model for reproducing DUWL biofilms. The bacteria obtained from DUWLs were cultured in R2A liquid medium for 10 days, and then stored at $-70^{\circ}C$. This stock was inoculated into R2A liquid medium and incubated in batch mode. After 5 days of culturing, it was inoculated into the biofilm formation model developed in this study. Our biofilm formation model comprised of a beaker containing R2A liquid medium and five glass rods attached to DUWL polyurethane tubing. Biofilm was allowed to form on the stir plate and the medium was replaced every 2 days. After 4 days of biofilm formation in the laboratory model, biofilm thickness, morphological characteristics and distribution of the composing bacteria were examined by confocal laser microscopy and scanning electron microscopy. The mean of biofilm accumulation was $4.68{\times}10^4$ colony forming unit/$cm^2$ and its thickness was $10{\sim}14{\mu}m$. In our laboratory model, thick bacterial lumps were observed in some parts of the tubing. To test the suitability of this biofilm model system, the effectiveness of disinfectants such as sodium hypochlorite, hydrogen peroxide, and chlorhexidine, was examined by their application to the biofilm formed in our model. Lower concentrations of disinfectants were less effective in reducing the count of bacteria constituting the biofilm. These results showed that our DUWL biofilm laboratory model was appropriate for comparison of disinfectant effects. Our laboratory model is expected to be useful for various other purposes in further studies.

• Korean Journal of Health Education and Promotion
• /
• v.5 no.2
• /
• pp.26-40
• /
• 1988

This survey was conducted to find out the present status of health education program being provided in primary schools focusing its planning, operation, contents and attitude of school nurses in September, 1988. Total 413 school nurses who are presently working in Seoul city was surveyed by mail and 167 school nurses who responded to the questionnaire were finally ana lysed. The following results were obtained. 1. The general charcteristics of the school nurses′ surveyed. As for age distribution, 30-40 age group was 60.4％ the highest and the mean age was 30. 13. As for educational attainment, junior nursing college was 71.9％. 68.3％ of the surveyed was married and 43.1％ of them has 5-10 years of working experiences. As for schools where school nurses are presently working, 31.7％ has 2,000-3,000 students, 22.8％ has 50-60 classes and 5 schools have more than 80 classes. 2. Planning of a school health education School health education was planned every semester in 55.7％, which was the highest. As for utilization status of the materials for planning of a school health education as a referance, 86.8％ of the total respondants utilized the guidelines published by Seoul city School nurses′ Association, and the administrative guidelines for school health, textbooks, school health statistics and articles related to school health in order. It was tried whether the number of referances being utilized was related to the working experiences. It was found that the shorter the experiances, the more materials were utilized. It was answered that teaching plan for health education was prepared by school-nurses themselves (95.2％), and was differentiated as three levels as the first and second grades, the third and fourth grades, and the fifth and sixth grades 3. The contents of the school health education 16 subjects offered to 6 grades of students were surveyed as follows. As for fifth and sixth grades, contents on growth and development was most widely provided as 54.5％, and 68.9％, respectively. And the next to this subject, dental health education was also frequently offered to the second, third and fourth grades as 50.9％, 68.9％, and 47.3％, respctively. 4. The operation of school health education Health education provided by school nurses was conducted formallu in 36.6％, and formally of informally accordin to grades in 43.9％. It was answered that 50.3％ of the surveyed school had started health education from 1987, when the plan for activation of school health was ordered from. Educational Committee. Teaching hours of school nurses was 6 in 32.9％, which was the highest. The lesson was provided for class unit in 77.2％, and sex education was sometimes offered to male and female students separately. As for support of health personnels out of school for health education, 79.0％ did not receive any support. If there were any aids out of school, 62.9％ received them from other related agencies and 74.3％ anwered that it was once in a semester. As for expenses for health education, 57.3％ did not input any expenses alloted to school health program as a whole. As audio-visual materials, slides were utulized most frequently and models, and charts in order. 5. Awareness of school nurses on the operation of school health education School nurses evaluated their educational quality as a health educator subjectively, 60-70％ of them answered to be average in 4 domains such as knowledge, educational skill, ability to prepare teaching plan, and cooperation. As for the awareness on the support and cooperation of the higher institutions, 46.4％ -61.8％ answered that "so and so" toward Ministry of Education and Ministry of Affairs, and 13-37％ "not supportive" Teachers of the corresponding schools were answered to be "so and so" in 55.9％-56.7％, and "very supportive" in 33.34％. There was a significant difference in formality of the lesson according to the support of the superintendent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1611-1618
• /
• 2012

Peeled balloon flower roots and parboiled bracken are pre-processed foodstuffs commonly used in the institutional food service. This study was conducted to establish the suitable manufacturing process for these foodstuffs and the optimal storage condition during distribution in the market. The most suitable manufacturing process was developed by surveying the manufacturing factories that produce these foodstuffs. Samples were collected by selecting a site among the surveyed manufacturing factories and storing them at different temperatures (4, 10, $20^{\circ}C$). The resulting changes in microbiological, physicochemical, and organoleptic qualities depending on the storage period (1, 2, 3, 4, 5, 7, 10 days) were investigated. The number of general bacteria in balloon flower roots at the beginning of the storage period was 5.26 log CFU/g and the number in the $4^{\circ}C$ storage group remained unchanged until the $3^{rd}$ day, but then increased to 7.63 log CFU/g at the $4^{th}$ day, and then gradually increased up to the $7^{th}$ day. However, in the 10 and $20^{\circ}C$ storage groups, the number was rapidly increased to 7.42 log CFU/g and 7.86 log CFU/g, respectively, at the $2^{nd}$ day. The parboiled bracken samples presented a similar trend. For physicochemical quality changes, the pH and hardness were rapidly decreased in the $20^{\circ}C$ storage group. The organoleptic quality was favorably evaluated (5~6 points out of 9 points) up to the $5^{th}$ day in the $4^{\circ}C$ storage group but the overall acceptability was rapidly decreased from the $2^{nd}$ day in the other storage temperature groups. These results confirmed the optimal storage condition for these pre-processed foodstuffs as being less than 3 days at $4^{\circ}C$.