• Journal of the korean academy of Pediatric Dentistry
• /
• 제25권3호
• /
• pp.598-603
• /
• 1998

Amelogenesis imperfecta is a group of hereditary defects of enamel unassociated with any other generalized defects. The prevalence of this condition has been estimated to range from 1 in 14,000 to 1 in 16,000, depending on the population studied. It may be differentiated into three general types : hypoplastic, hypocalcified, and hypomaturation, depending on the clinical presentation of the defects and the likely stage of enamel formation that is primarily affected. The dentin and root form are usually normal, but the enamel may lack the normal prismatic structure, being laminated throughout its thickness or at the periphery, with the result that these teeth are more resistant to decay. This case is that of an six-year-old girl brought to the pediatric dentistry department by her parents for esthetic reasons and also because of slight dental sensitivity. Clinical and radiographic examinations confirmed amelogenesis imperfecta. The author has treated with the crowning of the primary molars, using prefomed NiCr crowns and periodic fluoride application on whole dentition.

• Smart Structures and Systems
• /
• 제25권6호
• /
• pp.719-732
• /
• 2020

Real-time hybrid simulation (RTHS) which combines physical experiment with numerical simulation is an advanced method to investigate dynamic responses of structures subjected to earthquake excitation. The desired displacement computed from the numerical substructure is applied to the experimental substructure by a servo-hydraulic actuator in real time. However, the magnitude decay and phase delay resulted from the dynamics of the servo-hydraulic system affect the accuracy and stability of a RTHS. In this study, a robust stability analysis procedure for a general single-degree-of-freedom structure is proposed which considers the uncertainty of servo-hydraulic system dynamics. For discussion purposes, the experimental substructure is a portion of the entire structure in terms of a ratio of stiffness, mass, and damping, respectively. The dynamics of the servo-hydraulic system is represented by a multiplicative uncertainty model which is based on a nominal system and a weight function. The nominal system can be obtained by conducting system identification prior to the RTHS. A first-order weight function formulation is proposed which needs to cover the worst possible uncertainty envelope over the frequency range of interest. Then, the Nyquist plot of the perturbed system is adopted to determine the robust stability margin of the RTHS. In addition, three common delay compensation methods are applied to the RTHS loop to investigate the effect of delay compensation on the robust stability. Numerical simulation and experimental validation results indicate that the proposed procedure is able to obtain a robust stability margin in terms of mass, damping, and stiffness ratio which provides a simple and conservative approach to assess the stability of a RTHS before it is conducted.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제20권12호
• /
• pp.820-824
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.

• Journal of National Security and Military Science
• /
• 통권4호
• /
• pp.45-82
• /
• 2006

This paper seeks to search for wisdoms that may be applied to modern leadership through Tasan Jeong Yakyong's ideology, ShilHak, from the Chosun Dynasty. The present period is referred as the period of transformation and innovation or the period of knowledge information The leadership appropriate for the current period is thus called revolutionary leadership. This leadership accomplishes its goals by influencing the constituent's values, ethics, behavioral norms, and visions based on the leader's moral values, knowledge, and information. Thus, the essence of this paper is in acquiring wisdoms of leadership by company revolutionary leadership with Tasan's life. Tasan pursued change and innovation in a time where Chosun was in a state of decay by following the flow of world powers towards the concept of studying truth based upon facts such as changing the system of thought, reforming legislation, and developing technology. Moreover, he gave courage and hope to the people by demonstrating such leadership in practice. In addition, despite false accusations and spending 18 years in exile, he showed revolutionary life as an active intellectual by leaving 542 volumes of writing through his 'value innovation' that he "pursue things only for the people and the state." Consequently, the paper first deals with what kind of leadership is required for a leader in the position of a general and examines the kind of leadership capacity demanded. Subsequently, Tasan 's revolutionary life and hints of leadership messages in MokMinSimSuh are examined. Thus, this paper is centered upon the leadership of generals regarding how MokMinShimSuh may be applicable to modern leadership.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3771-3776
• /
• 2010

The dynamics of the $CN^-$-ligated ferric cytochrome c (CytcCN) in $D_2O$ at 283 K following Q-band photoexcitation at 575 nm was observed using femtosecond time-resolved vibrational spectroscopy. The equilibrium vibrational spectrum of the CN stretching mode of CytcCN shows two overlapping bands: one main band (82%) at $2122\;cm^{-1}$ with $23\;cm^{-1}$ full width at half maximum (fwhm) and the other band (18%) at $2116\;cm^{-1}$ with $7\;cm^{-1}$ fwhm. The time-resolved spectra show bleaching of the CN fundamental mode of CytcCN and two absorption features at lower energies. The bleach signal and both absorption features are all formed within the time resolution of the experiment (< 200 fs) and decay with a life time of 1.9 ps. One transient absorption feature, appearing immediately red to the bleach signal, results from the thermal excitation of low-frequency modes of the heme that anharmonically couple to the CN fundamental mode, thereby shifting the CN mode to lower energies. The shift of the CN mode decays with a lifetime of 2 ps, equivalent to the time scale for vibrational cooling of the low-frequency heme modes. The other transient absorption feature, which is 3.3 times weaker than the bleach signal and shifted $27\;cm^{-1}$ toward lower energies, is attributed to the CN mode in an electronically excited state where the CN bond is weakened with a lowered extinction coefficient. These observations suggest that photoexcited CytcCN mainly undergoes ultrafast radiationless relaxation, causing photo-deligation of $CN^-$ from CytcCN highly inefficient. As also observed in $CN^-$-ligated myoglobin, inefficient ligand photodissociation might be a general property of $CN^-$-ligated ferric hemes.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1991-1999
• /
• 2021

The response changes of the specific growth rate of Lemna minor duckweed was modeled using the logarithms of frond numbers on tritium activity concentration and gamma radiation dose from cobalt 60. The concept of average specific growth rate depends on the general exponential growth pattern, where toxicity is estimated based on the effect on the growth rate. One of the main questions of the effect of the radiation dose on duckweed is how to correlate the effect of beta radiation with the effect of any other radiation for modeling radiation on Lemna minor. Experimental data were extrapolated by utilizing the OECD guidelines. A linear relationship of absorbed dose and activity concentration was obtained for the average dependency growth rate of Lemna minor as D = (0.1257)·A^0.585. The dose rate of gamma irradiation from ⁶⁰Co increases with tritium activity dependence, on the specific growth rate of the Lemna minor duckweed. An increase in the tritium activity causes a decrease in the specific growth rate of the Lemna minor duckweed. It indicates that as the quantity of the beta radiation dose increase in Lemna minor duckweed, a higher quantity of gamma radiation will be required to cause the same effect in the specific growth rate of Lemna minor duckweed. The relation between the inhibition of the Lemna minor seedling growth and gamma and beta radiation dosage agrees roughly with that between the decrease of survival rate or fertility and dosage.

• Journal of Korean Academy of Dental Administration
• /
• 제6권1호
• /
• pp.28-35
• /
• 2018

Halitosis is primarily caused by bacterial decay. The bacteria, which originate from biofilms such as dental plaque, show abnormal proliferation due to dental caries, periodontal diseases, soft tissue infections, and tongue diseases. Most studies on halitosis have exclusively focused on gram-negative bacteria in the oral cavity rather than on general oral microorganisms including oral fungi. This study analyzed oral fungal hyphae, as well as distribution and motility of oral microorganisms, and provided basic data on the control of halitosis. Our results revealed that the greater is the number of cocci bacteria, the higher is the halitosis value, or bad breath value (BBV), suggesting that cocci have a strongly positive correlation with halitosis (r=0.379, p=0.030). Moreover, there was no significant difference in the morphology or distribution of motile bacteria and motility score, with respect to BBV. Lastly, we investigated the relationship between halitosis and oral fungal hyphae. We found that a higher BBV corresponded with a greater number of fungal hyphae and that patients with fungal hyphae scored a higher BBV. However, this result was not statistically significant. In conclusion, this study provided the preliminary data on oral microorganisms and halitosis, but further studies are needed to analyze the relationship between oral microorganisms and halitosis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제26권2A호
• /
• pp.371-382
• /
• 2006

A buffeting analysis is utilized for the estimation of aerodynamic vulnerability of a cable-stayed bridge due to upcoming wind turbulences. The buffeting analysis requires several input parameters such as structural parameters, aerodynamic parameters, and aero-elastic parameters. This study is motivated to estimate the sensitivity of these parameters on buffeting responses. The Seohae bridge is selected as an example bridge. The investigated parameters consist of the inclination of lift and drag coefficient of stiffening girder section, exponential decay factors of span-wise distributed wind turbulences, roughness length, spectra of wind velocity fluctuation, and structural damping. The buffeting response showed high dependency on the input parameters. As conclusions, the importance of parameter selection is emphasized. A further study is also proposed for more general conclusions.

• Journal of Korean Society for Geospatial Information Science
• /
• 제23권2호
• /
• pp.49-58
• /
• 2015

Up to the present point in time, the level diagnosis system for urban reactivation have utilized various methods for establishment and management in Korea and overseas, such as city competitiveness evaluation, urban decay diagnosis, etc. However, contrary to performing diagnosis and evaluations on general cities in existing studies, it is found to be a very complex and difficult task to perform a diagnosis on the level of U-City due to its unique characteristics. It is difficult to determine the level of a U-City using a level diagnosis system used for general cities because a U-City is comprised of a connection/fusion of various structural elements. Therefore, in order to perform a systematic diagnosis of a U-City, it is necessary to primarily observe the structural characteristics of a U-city to derive a diagnosis system based on the relativity between each structural element. This study aims to propose a directivity of a U-City level diagnosis system in comprehensive consideration of various elements, such as the objective of a U-City, as well as the structural elements that compose a U-City based on the definitions prescribed in U-City legislations, including ubiquitous city planning, ubiquitous city infrastructure, ubiquitous city technology, services, etc. The results of this study are expected to provide a resolution for the regional quality differences of U-Cities, and also establish a stepping-stone for the realization of U-Cities with high degree of completion.

• Journal of Practical Agriculture & Fisheries Research
• /
• 제6권1호
• /
• pp.63-72
• /
• 2004

This study was conducted to determine the growth and properties of green soybean sprouts(Vigna umbellata Thunb.) in soil culture. Patkong which is a small grain variety was sawn on electric heated hot bed in the greenhouse. Temperature of the culture bed were respectively 17, 20, 25, and 30℃ and water temperature were respectively 14, 17, 20 and 25℃. The kinds of soil used for this study were upland soil, sand, peatmoss and Pearlite, loess, loess and activated carbon. BA was treated in the concentrations of 240 times, 80 times, 40 times besides control. High temperature of 25 and 30℃ increased sprout yield compared to lower temperature but caused to decay from 7 days after sawing. Thus, the most optimum temperature for soil culture was 20℃. The best soil was sand of which increased fresh weight of 850g during same period. Addition of BA was most effective to promote sprout growth in the concentration of 80 times. Compared to general soybean sprouts, green soybean sprouts were 50% higher in fiber but 72% lower in glucide. Vitamin B was 200% higher in green soybean sprouts but vitamin C was higher in general soybean sprouts.