• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.108-118
• /
• 2009

Statement of problem: Volume stability, microstructure reproducibility and fluidity along with compatibility with dental stone must be in consideration in order to use tissue conditioner as a material for functional impression. There are few studies concerning the influence of time factor in oral condition on surface roughness of the stone and optimal retention period in the oral cavity considering such changes in surface roughness. Purpose: The purpose of this study was to find out the influence of various kinds of tissue conditioner, its powder/liquid ratio and immersion time on surface roughness of the stone. Material and methods: Materials used in this study were the three kinds of tissue conditioners(Coe-Comfort, Visco-Gel, Soft-Liner) and were grouped into three: group R-mixed with standard powder/liquid ratio that was recommended by the manufacturers, group M-mixed with 20% more powder, group L-mixed with 20% less powder. Specimens were made with the size of 20 mm diameter and 2 mm width. Each tissue conditioner specimens were subdivided into 5 groups according to the immersion time(0 hour, 1 day, 3 days, 5 days, 7 days), completely immersed into artificial saliva and were stored under $37^{\circ}C$. Specimens of which the given immersion time elapsed were taken out and were poured with improved stone, making the stone specimens. Surface roughness of the stone specimens was measured by a profilometer. Results: Within the limitation of this study, the following results were drawn. 1. Major influencing factor on surface roughness of the stone model made from tissue conditioner was the retention period(contribution ratio($\rho$)=62.86%, P<.05) of the tissue conditioner in oral cavity to make functional impression. 2. In case of Coe-Comfort, higher mean surface roughness value of the stone model with statistical significance was observed compared to that of Soft-Liner and Visco-Gel as immersion time changes(P<.05). 3. In case of group L(less), higher mean surface roughness value of the stone model with statistical significance was observed compared to that of R(recommended) and M(more) group as immersion time changes(P<.05). Conclusion: We may conclude that as the retention period of time in oral cavity influences surface roughness of the stone model the most and as the kind of tissue conditioner and its P/L ratio may influence also, clinician should well understand the optimal retention period in oral cavity and choose the right tissue conditioner for the functional impression, thus making the functional impression with tissue conditioner usefully.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.689-698
• /
• 1998

The purpose of this study was to evaluate the shear bond strength of light cured glass ionomer cement to enamel surface which treated with $37\%$ phosphoric acid, $10\%$ polyacrylic acid, $1.23\%$ acidulated phosphate fluoride gel and no etching agent. To compare the shear bond strength of glass ionomer cement, light-cured composite resin and chemically-cured composite resin were empoloyed as controls. Eight experiments groups were composed. 10 specimens of each group were bonded by metal bracket by tested in universal testing machine for shear bond strength, in stereoscope for adhesive remnants index. The data were evaluated statistically by SPSS/PC+. The results were as follows. 1. Among the groups of $37\%$ phosphoric acid treated and dry and bonded with light cured glass ionomer, light cured composite resin, and chemically cured composite resin, the shear bond strength of glass ionomer group showed no significant difference to the others, but the shear bond strength of chemically cured resin showed statistically lower than that of light cured resin (p<0.05). 2. The shear bond strengths of glass ionomer cement to enamel treated group with $1.23\%$ acidulated phosphate fluoride gel and $10\%$ polyacrylic acid and $37\%$ phosphoric acid showed statistically higher than that of no etched enamel group(p<0.U). 3. In the groups of glass ionomer cement, the presence of moisture was not significantly effect to the shear bond strength (p<0.05). 4. After debonding, no etched enamel group showed less residual materials on the enamel surface than the group of enamel etched with $37\%$ Phosphoric acid.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.568-573
• /
• 2004

Effects of dry heating and pH on pasting, thermal, and textural properties of corn starch containing soy protein isolate (SPI) were investigated. Samples were prepared by drying corn starch dispersions containing 3% SPI at $40^{\circ}C$ (unheated sample) or additionally heating dried mixtures at $130^{\circ}C$ (heated sample). Pasting properties of starch samples and textural properties of starch gels were measured using Rapid Visco-Analyzer (RVA) and Texture Analyzer (TA), respectively. Effects of SPI addition and dry heating on retrogradation and microstructure of gel samples were investigated using DSC and SEM, respectively. Pasting viscosity of dry-heated samples was significantly higher than that of unheated samples, and at pH 8 compared to pH 6. Dry-heat treatment decreased fracture stress and strain of starch gels containing SPI. No significant effects of dry-heat treatment and pH were observed on retrogradation of starch gels. Addition of SPI retarded starch retrogradation and modified starch gel properties with increased nutritional value. Dry-heat treatment with SPI could be possible method for starch modification.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.227-236
• /
• 1995

The objective of this research was to characterize fucoidans isolated from Laminaria religiosa and Undaria pinnatifida in Korea to obtain basic data for Production of soluble dietary fiber materials with biological functionality. Fucoidans were successively extracted 3 times at $65\%$ for 1hr with arid solution of pH 2.0, and cetylpyridinium chloride was used for partial purification. The yields of partially purified fucoidans were $2.71\%$ for L. religiosa, $6.65\%$ for sporophylls of U. pinnatifida and $0.40\%$ for blade of U. pinnatifida. The yield from sporophylls of U. pinnatifida was highest among the sample tested, whereas the yield from blade of U. pinnatifida was lowest. It appeared that the fuconidans content in different parts of U. pinnatifida varied. Partially purified fucoidans were separated into 3 fractions by DEAE-Sephadex A-25 ion exchange column and the maior fractions were refractionated with tractional precipitation with ethanol. $60-70\%$ ethanol precipitated fractions of 1. religiosa and sporophylls of U. pinnatifida turned out to be homogeneous by cellulose acetate electrophoresis and gel filteration chromatography. The molar ratios of fucose, galactose, and sulfate in the purified fucoidans(ethanol precipitated fractions) were 1 : 0.31 : 2.43 for L. religiosa and 1 : 0.97 : 1.99 for sporophylls of U. pinnatifida. The averaged molecular weights of the purified fucoidans from L. religiosa and sporophylls of U. pinnatifida were 31,000 and 38,000, respectively.

• Applied Biological Chemistry
• /
• v.36 no.2
• /
• pp.105-110
• /
• 1993

Inulin fructotransferase from Enterobacter sp. S45 was purified with DEAE-cellulose column chromatography and fast protein liquid chromatography. The purified enzyme gave a single band on polyacrylamide gel electrophoresis. The molecular weight was estimated to be 42,800 by SDS-polyacrylamide gel electrophoresis. The optimal pH and temperature for the enzyme reaction were pH 5.5 and $55^{\circ}C$, respectively. $Mg^{2+}$ activated the enzyme activity, but $Fe^{3+}$, $Cu^{2+}$, $Hg^{2+}$ significantly inhibited. After exhaustive digestion of inulin by the enzyme, DFA III, sucrose, 1-kestose and nystose were produced. Sucrose, 1-kestose, raffinose and melezitose can't be used as substrates by the enzyme, but nystose and 1-F-fructofuranosyl nystose were hydrolysed. The Km and Vmax for inulin of the enzyme were 1.4 mM and $0.196\;{\mu}mole/min$, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2017

Functional coatings, such as anti-reflection and self-cleaning, are frequently applied to cover glass for photovoltaic applications. Anti-reflection coatings made of mesoporous silica film have been shown to enhance the light transmittance. $TiO_2$ photocatalyst films are often applied as a self-cleaning coating. In this study, transparent hydrophobic anti-reflective and self-cleaning coatings made of $SiO_2/TiO_2$ thin layers were fabricated on a slide glass substrate by the sol-gel and dip-coating processes. The morphology of the functional coatings was characterized by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). The optical properties of the functional coatings were investigated using an UV-visible spectrophotometer. Contact angle measurements were performed to confirm the hydrophobicity of the surface. The results showed that the $TiO_2$ films exhibit a high transmittance comparable to that of the bare slide glass substrate. The $TiO_2$ nanoparticles make the film more reflective and lead to a lower transmittance. However, the transmittance of the $SiO_2/TiO_2$ thin layers is 93.5% at 550 nm with a contact angle of $110^{\circ}$, which is higher than that of the bare slide glass (2.0%).

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.268-280
• /
• 1994

Tissue conditioners have been used for treatment of denture stomatitis caused by wearing of dentures. Early studies pointed out Candide albicans (C. albicans) as main etiologic factor, and antifugal agents were added for control of the species. But there is a little information about broad comparison on the effect of tissue conditioners and antifungal agents added. The purpose of the present study was to compare the inhibiting effect of four tissue conditioners and one temporary soft liner on the growth of C. albicans for treatment of denture stomatitis using gel diffusion method by measuring diameter of the zone of growth inhibition. Three antifungal agents were added to each material for evaluation of the effect of added agents. Finally, observation was made to evaluate the effect of the loss of antifungal elements by aging of the specimen. The results of this study were obtained as follows : 1. Tempo had remarkable antifungal effect showing the zone of growth inhibition as 2.35 mm at 1st day, and was most effective on End: 4th and 7th day from incubation (p<0.05). But Coecomfort, Dura conditioner, Visco-gel, Coe-soft had little antifungal effect from the 1st day of incubation. 2. Nystatin was most effective showing 9.60-12.04 mm of zone of inhibition at the 1st day from incubation. The antifungal properties were reduced to amphotericin B, chlorhexidine and materials without agent (p<0.05), and the effect was diminished by time. 3. As pretreatment with amphotericin B, nystatin, chlorhexidine, Tempo was very effective at the 1st day from incubation showing zone of inhibition as 3.65, 12.04, 4.78 mm with addition of each agent. Dura conditioner had strongest antifungal effect at the next day as 2.86, 5.33, 1.29 mm of zone of inhibition, and yielding results of Coe-comfort, Tempo, Coe-soft was shown at 4th and 7th day from incubation (p<0.05). Taken all together, tissue conditioners have little antifungal effect except Tempo. Formation of the zone of growth inhibition was due to agents amphotericin B, nystatin, chlorhexidine and nystatin was most effective. Conclusively, it is advisable to select material which is effective on the growth of C. albican and consider addition of antifungal agents for treatment of denture stomatitis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.4
• /
• pp.1-9
• /
• 1982

Variation of soil properties is studied by permeating injection of chemical grouts, such as cement type, water-glass type and acrylamide type, to the same soil samples with different densities. Moreover, injection tests using specially prepared equipments of 1.0 shot system and 1. 5 shot system are attempted to investigate permeating injection effects in highly compacted soil and in the presence of ground water. The main factor which causes the improvement of cut-off effect and shearing strength is the cohesion of soil. The strength in the loose state is fundamentally governed by the membrane cohesion, meanwhile, in the loose state is governed by the structural cohesion. Injection effects under the ground water flow is considerably decreased, and effective gelling ratio of approximate 45~80% is observed by variation of velocity and gel time, besides grading of injection materials has high relation with permeation and traveling length but has little relation with effective gelling ratio. Permeating injection effects, such as gelling scope, gelling strength in highly compaoted soil conditions can be confirmed by penetration resistance diagram and iso-strength curve.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.12
• /
• pp.1008-1015
• /
• 2002

The fabricated La-modified lead titanate (PLT) thin film without poling treatment was investigated for modulation frequency dependence of pyroelectric properties by the dynamic method. $Pb_{l-x}La_{x}Ti_{l-x/4}O_3$(x=0.1) (PLT(10)) thin film haying 10 mol% La content was deposited on a Pt/$TiO_{x}$/$SiO_2$/Si substrate by sol-gel method. The PLT(10) thin film exhibits a relatively excellent dielectric property. The pyroelectric coefficient (p) of the PLT(10) thin film is 6.6 x $10^{-9}C$$textrm{cm}^2$$.$K without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are 1.03 x $10^{-11}C$.cm/J and 1.46 x $10^{-10}C$.cm/J, respectively The PLT(10) thin film has voltage responsivity (RV) of 5.IS V/W at 8 Hz. Noise equivalent power (NEP) and specific detectivity ($D^{*}$) of the PLT(10) thin film are 9.93 x $10^{-8}$W/$Hz^{1/2}$ and 1.81 x $10^{6}$cm.$Hz^{1/2}$/W at the same frequency of 100 Hz,, respectively The results means that PLT thin film having 10 mol% La content is suitable for the sensing materials of pyroelectric IR sensors.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.7-14
• /
• 2000

A Bi$_{4}$Ti$_{3}$O$_{12}$ (BIT) thin film is prepared by sol-gel method using acetate precursors and evaluated whether it could be applied to NVFRAM (Non-Volatile Ferroelectric RAM). The drying and the annealing temperature are 40$0^{\circ}C$ and $650^{\circ}C$, respectively and they are determined from the DT-TG (Differential Thermal-Thermal Gravimetric) analysis. The BIT thin film deposited on Pt/Ta/SiO$_{2}$/Si substrate shows orthorhombic perovskite phase. The grain size and the surface roughness are about 100 nm and 70.2$\AA$, respectively. The dielectric constant and the loss tangent at 10 KHz are 176 and 0.038, respectively, and the leakage current density at 100 ㎸/cm is 4.71 $mutextrm{A}$/$\textrm{cm}^2$. In the results of hysteresis loops measured at $\pm$250 ㎸/cm, the remanent polarization (Pt) and the coercive field (Ec) are 5.92 $\mu$C/$\textrm{cm}^2$ and 86.3 ㎸/cm, respectively. After applying 10$^{9}$ square pulses of $\pm$5V, the remanent polarization of the BIT thin film decreases as much as about 33% from 5.92 $\mu$C/$\textrm{cm}^2$ of initial state to 3.95 $\mu$C/$\textrm{cm}^2$.