• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.315-318
• /
• 2001

The optical and dielectric properties of TiO$_2$ thin films prepared with mixtures of Epoxy, bits-(4, 4'-p-toluenesulfonylacidic isoproplylidene)-cyclohexadiol and UVI 6990 in dry sol-gel process were investigated. The absorption peak of the films was showed at 360nm. Photocurrent of the thin films doped with 50 wt% of TiO$_2$was higher than that of nondoped thin films. Energy gap was lowered from 3.6 to 3.3 eV with increasing amount of TiO$_2$. Relative dielectric constants of samples were 1.5 to 3 and showed a characteristics of lower dielectric materials.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.414-417
• /
• 2011

Indium tin oxide (In:$SnO_2$) nanoparticles were synthesized employing a sol-gel combustion method followed by annealing. The TG, XRD, XPS and SEM results of the precursor powders and calcinated In:$SnO_2$ nanoparticles were investigated. Crystal structures were examined by powder XRD, and those results show shaper intensity peak at $25.6^{\circ}$ ($2{\theta}$) of $SnO_2$ by increased annealing temperature. A particle morphology and size was examined by SEM, and the size of the nanoparticles was found to be in the range of 20~30nm. In:$SnO_2$ films could controlled by nanoparticle material at various annealing temperature. The sol-gel combustion method was offered simple and effective route for the synthesis of In:$SnO_2$ nanoparticles.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.4
• /
• pp.339-345
• /
• 1995

For the effective treatment of aphthous stomatitis, the matrix type mucoadhesive patches containing triamcinolone acetonide have been formulated. The drug layer was obtained by drying the polymer gel which was prepared with carbomer 934P, ammoniomethacrylate copolymer, titanium dioxide and polyethylene glycol 400. The effects of the content of additives on physical characteristics of the polymer gel and the drug layer were evaluated. The addition of carbomer increased the yield point and the zero-shear viscosity of polymer gel as well as the thickness, the water absorption ratio, the adhesive time and $T_{50%}$ of drug layer. The adhesive time and the water absorption ratio of drug layer were also improved by the addition of ammoniomethacrylate copolymer, but the addition of titanium dioxide had decreased the zero-shear viscosity of polymer gel and the adhesive time of drug layer.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.11-16
• /
• 1998

$VO_2$ thin films have been prepared on borosilicate glass substrate using alkoxide method to characterize the effects of fabricating factors on thermochromic performance. The gel films formed by spin coating were converted to $V_2O_5$ phase during oxidizing heat-tratment and the $VO_2$ phase were formed by reducing heat-treatement. The thermochromic switching properties of $VO_2$ thin films are strongly affected by the crystal phase and microstructure and those could be controlled by reducing heat-treatment conditions. The ther-mochromic switching characteristics of $VO_2$ thin films synthesized were measured at IR (2.5$\mu\textrm{m}$) as the transition temperature of $63^{\circ}C$ the transition width of $3.6^{\circ}C$and the maximum and minimum transmittance of 84% and 14% respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.535-540
• /
• 1998

Thin films of PLZT were prepared on indium tin oxide(ITO) coated glass substrates by sol-gel process and annealed by rapid thermal annealing(RTA) at $750^{\circ}C$ for 5 minutes. The crystal structure of PLZT thin films were investigated for a different Zr mol% content. XRD results showed that the crystallographic structure was transitted from tetragonal to rhombohedral structure as Zr mol% increased. Raman spectroscopy results showed that the bands of spectra became broader as the amount of Zr mol% increased and two crystal phase coexisted at 2/55/45 PLZT film. Raman spectroscopy was useful for crystal structure analysis of PLZT thin films.

• Journal of the Korean Ceramic Society
• /
• v.37 no.7
• /
• pp.625-631
• /
• 2000

In this study, the characteristics and sinterablities of TiO2 powders which were fabricated on sol-gel process and supercritical fluid process were examined. The powders fabricated on sol-gel process were amorphous. The particle size and shape were changed with the amount of water used for hydrolysis of titanium ethoxide. The powders were changed from amorphous to crystalline by heating at 400℃. The crystalline anatase TiO2 powders were directly prepared in ethanol supercritical fluid condition that temperature was 270±3℃ and pressure was 7.3 MPa. It's primary crystalline size was 20 nm and agglomerated as spherical shape whose size was 0.7∼1㎛. The powders prepared on sol-gel process were not sintered densely at 900℃ because of abnormal grain growth. However, the powders which prepared on supercritical fluid process were sintered densely at the comparatively low temperature of 800℃ by ideal growth of grain, which are fired at 900℃.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.281-282
• /
• 2007

$Mg_4Nb_2O_9$ (MN) ceramics have been prepared by a sol-gel method. The powder characteristics, phase evolution, and microwave dielectric properties of the MN were investigated in various processing conditions such as sol-gel compositions, calcination, and sintering temperatures. A Qxfo value of 111,717 GHz with a ${\varepsilon}_r$ of 10.59 and a ${\tau}_f$ of $+1.736\;ppm/^{\circ}C$ was obtained after sintering at $1300^{\circ}C$ for 5 h.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.527-531
• /
• 2016

In this study, p-type thin film transistors consisting of CuO channels were fabricated by sol-gel process, with copper (II) acetate monohydrate precursors. At $500^{\circ}C$, the deposited films were fully converted into monoclinic phase CuO. The fabricated CuO thin film transistors deliver field effect mobility in saturation regime of $0.015cm^2/Vs$, and $I_{on}/I_{off}$ of ${\sim}10^3$. The degradation of the performance of the fabricated CuO thin film transistor caused by the exposure to air has been studied.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.211-215
• /
• 1999

The pure-separation of calcium chloride-treated fibroin hydrolysates could be carried out using gel filtration chromatography. Also, the effect of its enzymatic hydrolysis was investigated in order to find out the enhancement of their functionality. The average molecular weight(Mw), solubility and free amino acid compositions of three hydrolysates samples (calcium chloride, calcium chloride-flavourzyme and calcium chloride-thermoase)were measured to compare their characteristics. The molecular weight of calcium chloride hydrolysate was about Mw 46,800 and it can be reduced to Mw 12,500 and 1,070 upon the enzymatic hydrolysis by flavourzyme and thermoase, repectively. A solubility of calcium chloride-treated samples shows about 60% while calcium chloride/enzyme-treated samples are perfectly soluble (100% solubility). The total amino acid composition of calcium chloride enzymatic hydrolysates are much higher than that of calcium chloride hydrolysate.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1153-1158
• /
• 1997

The powder characteristics of LiMn2O4 prepared by the citrate sol-gel method have been investigated. The optimum pH for the preparation of homogeneous citrate gel was calculated by the theoretical consideration of thermodynamic equilibrium constants for metal-citrate complexes and metal salts. The obtained citrate gel was prefired at 300 ℃ and calcined at 300-700 ℃ for 1 h. The obtained powders were characterized by TG/DSC, FT-IR spectrometer, X-ray diffractometer, SQUID magnetometer, SEM, and particle size analyzer. It was observed that the mixed phases of spinel LiMn2O4 and Mn3O4 were transformed into spinel LiMn2O4 phase and the vibrational bands due to the carbonate and nitrate were also disappeared over 400 ℃. At temperatures below 150 K, inverse molar susceptibilities of every sample began to show an antiferromagnetic ordering of Mn magnetic moments.