• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.97-97
• /
• 2013

Recently, Cu2ZnSn(S,Se)4 (CZTSS), which is one of the In- and Ga- free absorber materials, has been attracted considerable attention as a new candidate for use as an absorber material in thin film solar cells. The CZTSS-based absorber material has outstanding characteristics such as band gap energy of 1.0 eV to 1.5 eV, high absorption coefficient on the order of 104 cm-1, and high theoretical conversion efficiency of 32.2% in thin film solar cells. Despite these promising characteristics, research into CZTSS based thin film solar cells is still incomprehensive and related reports are quite few compared to those for CIGS thin film solar cells, which show high efficiency of over 20%. I will briefly overview the recent technological development of CZTSS thin film solar cells and then introduce our research results mainly related to sputter based process. CZTSS thin film solar cells are prepared by sulfurization of stacked both metallic and sulfide precursors. Sulfurization process was performed in both furnace annealing system and rapid thermal processing system using S powder as well as 5% diluted H2S gas source at various annealing temperatures ranging from $520^{\circ}C$ to $580^{\circ}C$. Structural, optical, microstructural, and electrical properties of absorber layers were characterized using XRD, SEM, TEM, UV-Vis spectroscopy, Hall-measurement, TRPL, etc. The effects of processing parameters, such as composition ratio, sulfurization pressure, and sulfurization temperature on the properties of CZTSS absorber layers will be discussed in detail. CZTSS thin film solar cell fabricated using metallic precursors shows maximum cell efficiency of 6.9% with Jsc of 25.2 mA/cm2, Voc of 469 mV, and fill factor of 59.1% and CZTS thin film solar cell using sulfide precursors shows that of 4.5% with Jsc of 19.8 mA/cm2, Voc of 492 mV, and fill factor of 46.2%. In addition, other research activities in our lab related to the formation of CZTS absorber layers using solution based processes such as electro-deposition, chemical solution deposition, nano-particle formation will be introduced briefly.

• Korean Journal of Comparative Education
• /
• v.28 no.1
• /
• pp.135-151
• /
• 2018

This study was conducted to help establish the status of comparative education as an academic discipline by investigating its relationship with educational evaluation. Comparative education as a subfield of education covers other areas of study in education, while educational evaluation is a study of methodology. First, international comparative study was investigated, and recent methodologies in educational evaluation were introduced. International comparative study started in 1960's, and is being expanded. The participating countries hope for better education by comparing their educational curricula and practices with others. For international comparative studies, a differential item functioning analysis as a multigroup analysis can provide information on what sociocultural factors other than the construct are affecting the measurement results. The study dataset has a hierarchical structure so that multilevel item response theory is suitable to obtain multidimensional national profiles. Although there have been methodological advances in educational evaluation, the methods are not available in comparative education. In order to reduce the gap, scholars in educational evaluation should try to make the methods easily available, while those in comparative education should try to use the exact and precise methods in their studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.604-609
• /
• 2019

In this study, we fabricated a capacitive humidity sensor with interdigitated (IDT) electrodes using a thermosetting polyimide as a humidifying material. First, the number of electrodes, thickness, and spacing of the polyimide film were optimized, and a mask was designed and fabricated. The sensor was fabricated on a silicon substrate using semiconductor processing equipment. The area of the sensor was $1.56{\times}1.66mm^2$, and the width of the electrode and the gap between the electrodes were each $3{\mu}m$. The number of electrodes was 166, and the length of an electrode was 1.294 mm for the sensitivity of the sensor. The sensor was then packaged on a PCB for measurement. The sensor was inserted into a chamber environment with a temperature of $25^{\circ}C$ and connected to an LCR meter to measure the change in capacitance at relative humidity (RH) of 20% to 90%, 1 V, and 20 kHz. The results showed a sensitivity of 26fF/%RH, linearity of < ${\pm}2%RH$, and hysteresis of < ${\pm}2.5%RH$.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.233-241
• /
• 2015

In 2014, the United Nations Framework Convention on Climate Change (UNFCCC) agreed to submit the Intended Nationality Determined Contributions (INDCs) at the conference of parties held in Lima, Peru. Then, the South Korean government submitted the INDCs including GHGs reduction target and reduction potential on July, 2015. The goal of this study is to predict GHGs emission and to analyze reduction potential in agricultural sector of Korea. Activity data to estimate GHGs emission was forecast by Korea Agricultural Simulation Model (KASMO) of Korea Rural Economic Institute and estimate methodology was taken by the IPCC and guideline for MRV (Measurement, Reporting and Verification) of national greenhouse gases statistics of Korea. The predicted GHGs emission of agricultural sectors from 2021 to 2030 tended to decrease due to decline in crop production and its gap was less after 2025. Increasing livestock numbers such as sheep, horses, swine, and ducks did not show signigicant impact the total GHGs emission. On a analysis of the reduction potential, GHGs emission was expected to reduce $253Gg\;CO_{2-eq}$. by 2030 with increase of mid-season water drainage area up to 95% of total rice cultivation area. The GHGs reduction potential with intermittent drainage technology applied to 10% of the tatal paddy field area, mid-drainage and no organic matter would be $92Gg\;CO_{2-eq}$. by 2030.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.1-12
• /
• 2018

Heat waves during summer cause a qualitative degradation in urban environments and increases the number of patients who suffer from heat-related illnesses, and the urbanization deepens these problems. It is a prerequisite to analyze the current status accurately in order to assess the urban heat island phenomenon. Thus, this study aims to collect weather measurements information at the occurrence of a severe heat wave in Seoul, thereby allowing analysis of information, which will also consider the land use type. The weather measurement information used in the analysis had an advantage, as the gap between measured locations is considerably shorter than before due to the miniaturization of the automatic weather systems (AWS), which are connected through the communication network. Based on the above collected information, a temporal change in the data due to land use type was analyzed. As a result, the difference in temperature change in response to the land use type could be compared, as could the occurrence pattern of the tropical night phenomenon, and the effect on temperature reduction in green belt areas could be identified through the comparison of the intensity of heat island by time and land use. The methods and results derived in this study through the comparative analysis in terms of time and land use, weather information measurements, and mapping can be utilized as foundational data that can be referred to in urban planning to reduce the heat island phenomenon in the future.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.14-21
• /
• 2019

In this paper, we implemented an on-board miniaturization antenna operating 2.4 GHz using MZR(Mu Zero Resonator). It is must be operating under the constraint that the size of the small terminal PCB should be $78{\times}38{\times}0.8mm^3$ and the size of the system should be $63{\times}38{\times}0.8mm^3$ and the size of the radiating part should be $15{\times}38{\times}0.8mm^3$. The feeding structure uses a CPW structure for stable feeding and a feeding point at the upper left of the system board. A magnetic field coupling structure is used for coupling the feeding part and the antenna. The resonance frequency of the MZR is determined by the series inductance and capacitance of the cell, so the gap between the cells, the length of the cell, the length of the interdigital capacitor, and the spacing between the radiation part and the ground plane are analyzed. The antenna was designed and fabricated using the results. The total size of the antenna including the feed structure is $20.8{\times}9.0{\times}0.8mm^3$, and the electrical length is $0.1664{\lambda}_0{\times}0.072{\lambda}_0{\times}0.0064{\lambda}_0$. The measurement result for 10 dB bandwidth, gain and directivity are 440 MHz(18.3%), 0.4405 dB, and 2.722 dB respectively. It is confirmed that the radiation pattern has omnidirectional characteristics and it can be applied to ultra small terminal antenna.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.49-56
• /
• 2019

The purpose of this study was to extract the evaluation factors and assess the relative importance between the factors. For this purpose, the evaluation factors were extracted through literature review and the process of brainstorming with experts, who are related to port security. The evaluation factors were then classified into four higher factors and twelve sub- factors through the use of the AHP method. A survey on the classified factors was conducted by experts composed of public officials, port authority employees and education institutions officials. We also carried out statistical tests to determine the perception gap of weights between the groups. As a result of a relative importance analysis of strength, the security operating system factor was highest, followed by improvement of hardware facilities and increase of security personnel. There was a difference in perception among the groups in policy support, facility support and personnel resources budget support. The results of the analysis show that the strength operating system through the establishment of an integrated monitoring system is a priority. It is necessary to understand the difference of perception between groups and build a systematic cooperation system. The evaluation factors extracted from this study can be used for the measurement of port security efficiency in further work.

• Journal of Korean Elementary Science Education
• /
• v.41 no.2
• /
• pp.267-282
• /
• 2022

This study aims to analyze the continuity and sequence between the intelligent life curriculum for grades 1-2 and the science curriculum for grades 3-4 with a focus on knowledge and inquiry process skills. The results demonstrate that contents related to science in the intelligent life curriculum consisted of only 10 out of 32 elements. Five elements were related to the science curriculum for grades 3-4 and limited to the 'life sciences' area. Particularly, the intelligent life curriculum did not address topics related to 'matter' and 'motion and energy'. Developmental connection was established in the 'life sciences' area and dramatic changes were noted for the topics related to 'earth and space' area. In terms of inquiry process skills, the levels of observation, measurement, inference, and communication naturally increased, whereas a developmental connection was noted between the intelligent life and science curricula. Classification can be viewed as a developmental link; however, viewing the classification as scientific from the epistemic perspectives was insufficient. In the case of expectation, a gap was observed in both curricula due to the absence of expectation activities in the intelligent life curricula. The study discussed the implications for securing the connection between the intelligent life and science curricula on the basis of these results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.219-224
• /
• 2022

CaF₂ single crystal has a large band gap (12 eV), and it is used for optical windows, prisms, and lenses due to its excellent transmittance in a wide wavelength range and low refractive index. Moreover, it is expected to be one of the materials for ultraviolet transmissive laser optical components. CaF₂ belongs to the fluoride compounds and has a face-centered cubic (FCC) structure with three sub-lattices. The representative method for CaF₂ single crystal growth is Czochralski, which method has the advantages of high production efficiency and the ability to make large crystals. In this study, X-ray diffraction (XRD), X-ray rocking curves (XRC) measurement, and chemical etching were performed to analyze the crystallinity and defect density of the CaF₂ single crystals, grown by the Czochralski method. Fourier-transform infrared spectroscopy (FT-IR) and UV-VIS-NIR spectroscopy systems were used to investigate the optical properties of the CaF₂ crystal. The provability of various applications, including UV application, was systematically investigated with various analysis results.

• Journal of Technology Innovation
• /
• v.11 no.1
• /
• pp.147-176
• /
• 2003

This Paper Presents a new measurement technique to derive the level of BSRC (Basic Science and Research Capacity) index by use of the factor analysis which is extended with the assumption of the standard normal probability distribution of the selected explanatory variables. The new measurement method is used to forecast the gap of Korea's BSRC level compared with those of major OECD countries in terms of time lag and to make their international comparison during the time period of 1981∼1999, based on the assumption that the BSRC progress function of each country takes the form of the logistic curve. The US BSRC index is estimated to be 0.9878 in 1981, 0.9996 in 1990 and 0.99991 in 1999, taking the 1st place. The US BSRC level has been consistently the top among the 16 selected variables, followed by Japan, Germany, France and the United Kingdom, in order. Korea's BSRC is estimated to be 0.2293 in 1981, taking the lowest place among the 16 OECD countries. However, Korea's BSRC indices are estimated to have been increased to 0.3216 (in 1990) and 0.44652 (in 1999) respectively, taking 10th place. Meanwhile, Korea's BSRC level in 1999 (0.44652) is estimated to reach those of the US and Japan in 2233 and 2101, respectively. This means that Korea falls 234 years behind USA and 102 years behind Japan, respectively. Korea is also estimated to lag 34 years behind Germany, 16 years behind France and the UK, 15 years behind Sweden, 11 years behind Canada, 7 years behind Finland, and 5 years behind the Netherlands. For the period of 1981∼1999, the BSRC development speed of the US is estimated to be 0.29700. Its rank is the top among the selected OECD countries, followed by Japan (0.12800), Korea (0.04443), and Germany (0.04029). the US BSRC development speed (0.2970) is estimated to be 2.3 times higher than that of Japan (0.1280), and 6.7 times higher than that of Korea. German BSRC development speed (0.04029) is estimated to be fastest in Europe, but it is 7.4 times slower than that of the US. The estimated BSRC development speeds of Belgium, Finland, Italy, Denmark and the UK stand between 0.01 and 0.02, which are very slow. Particularly, the BSRC development speed of Spain is estimated to be minus 0.0065, staying at the almost same level of BSRC over time (1981 ∼ 1999). Since Korea shows BSRC development speed much slower than those of the US and Japan but relative]y faster than those of other countries, the gaps in BSRC level between Korea and the other countries may get considerably narrower or even Korea will surpass possibly several countries in BSRC level, as time goes by. Korea's BSRC level had taken 10th place till 1993. However, it is estimated to be 6th place in 2010 by catching up the UK, Sweden, Finland and Holland, and 4th place in 2020 by catching up France and Canada. The empirical results are consistent with OECD (2001a)'s computation that Korea had the highest R&D expenditures growth during 1991∼1999 among all OECD countries ; and the value-added of ICT industries in total business sectors value added is 12% in Korea, but only 8% in Japan. And OECD (2001b) observed that Korea, together with the US, Sweden, and Finland, are already the four most knowledge-based countries. Hence, the rank of the knowledge-based country was measured by investment in knowledge which is defined as public and private spending on higher education, expenditures on R&D and investment in software.