• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.87-95
• /
• 2012

In recent years, laser-arc hybrid welding has begun to be adopted for assembly welding of automotive bodies and parts, because the hybrid welding process can weld lapped steel sheets having a larger gap than is possible with laser welding. In this paper, to predict the twist deformation by the hybrid welding when brackets are welded in B pillar of a passenger car, the residual stress using CAE is analyzed and the deformation result of CAE is compared with the measured deformation. First of all, after modeling heat source as intended to be expressed with laser-arc hybrid welding method, heat source fitting is done with welding conditions and a section of welding part obtained through specimen test. In case of heat source functions, laser used conical source and arc used double ellipsoid source. Through the local model analysis, elements which are located in the center of the model are selected. The elements are called WME(Welding Macro Element). This WME is extruded in the welding lines and welding phenomenon of complex parts is accomplished. The deformation amount after hybrid welding is got through a simulation, the validity of simulation is verified by measuring the panel and comparing with the simulation result.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2924-2932
• /
• 2015

Image binarization is a process to divide the image into objects and backgrounds, widely applied to the fields of image analysis and its recognition. In the existing method of binarization, there is some uncertainty when there is insufficient brightness gap between objects and backgrounds in setting threshold. The method of fuzzy binarization has improved the features of objects efficiently. However, since this method sets ${\alpha}$-cut value statically, there remain some problems that important features of objects can be lost during binarization. Therefore, in this paper, we propose a binarization method which does not set ${\alpha}$-cut value statically. The proposed method uses fuzzy membership functions calculated by thresholds of mean, iterative, and Otsu binarization. Experiment results show the proposed method binaries various images with less loss than the existing methods.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.25
• /
• pp.41-71
• /
• 2005

"UNIDROIT Principles 2004" focused on an enlargement rather than a revision. An additional Section or Chapter so to speak, which are about, the Authority of a Agents, Third Party Rights, Set-off, Assignment of Rights, Transfer of Obligations and Assignment of Contracts, and Limitation Periods have been added, while the only change of substance made to the 1994 Edition, apart from two paragraphs in the Preamble, and three new provisions in Chapter 1 and 2 which are necessary to adapt the Principles to the needs of electronic contracting. The Principles which have the nature of the restatement of international uniform laws (for example CISG) are continuous exercise. Therefore we should note whether in the future our concerns would be on a additional topics on a improvement of the current text by monitoring the reception of the "UNIDROIT Principles 2004" in practice, and the application by contracting parties. The purposes of the Principles may be classified into three ; the rules of law governing the contract, means of interpreting and supplementing international uniform law or domestic law, or models for national and international legislator. Among them, the function of governing law may be applied by the express choice by the parties or by the implied choice like "general principles of law" or "les mercatoria", and it may be applied in the absence of any choice of law by the parties. Among there importance functions, this writer would like to emphasize the function to supplementing international uniform law instruments. The reason is that the CISG which has been established as an international uniform sales act and to which our country would be a contracting State from March, 2005, needs a lot of gap-filling. For this purpose it is advisable the parties to insert following provisions in their contract. "This contract shall be governed by the CISG, supplemented when necessary by the UNIDROIT Principles 2004" Thus success in practice of the UNIDROIT Principles over the last then years has surpassed the most optimistic expectations. It is hoped that the 2004 Edition of the UNIDROIT Principles will be just as favorably received by legislators, business persons, lawyers, arbitrators and judges and become even better known and more widely used throughout the World.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.3
• /
• pp.265-276
• /
• 2020

The study aims to explore the problems of the existing Shariah Governance Framework (SGF) and its concerned authorities in the context of Bangladesh. Thus, according to responses from 17 respondents, this study outlines that Bangladesh has an absence of a shortage of experts, experienced, knowledgeable, and qualified Shariah people at all levels (i.e., the central bank, Islamic banks, Shariah Supervisory Boards (SSBs), and regulators). Therefore, Bangladesh does not have a separate Islamic banking act, Shariah audit firm, Shariah index institutions, and comprehensive SGF. The existing guideline has a limitation concerning its comprehensiveness, accountability, responsibility, and structure of SSBs. Islamic banks do not follow the instruction of the central bank in the formation of SSBs. As a result, there is an absence of competent and qualified SSB, which also results in the functions of Shariah departments as well as Shariah applications. Usually, the Board of Directors (BOD), management, executives, customers, and the public also have the conceptual gap about Islamic banks, SGF, and banking system compared to the regular prayers, faith, and belief. Concisely, Bangladesh requisites a comprehensive SGF, Islamic banking act, a standard accounting system, and a robust Shariah audit system for the overall development of Islamic banks and SGF.

• KSCI Review
• /
• v.14 no.2
• /
• pp.159-164
• /
• 2006

MES(Manufacturing Execution System) is a control system which supports basic activities(scheduling, working process and qualify management, etc) to execute working on the shop floor. As especially MES is a system to decrease the gap between production planning and operating, it executes functions that make decision between management and labor using real-time data. MES for real-time information processing requires certain conditions such as data modeling of RFID, which has recently attracted attentions, and monitoring of each product unit from manufacture to sales. However, in the middle of processing the unit with a RFID tag, transponders(readers) can't often read the tag due to reader's malfunctions, intentional damages, loss and the circumstantial effects; for that reason, users are unable to confirm the location of the product unit. In this case, users cannot avoid tracing the path of units with uncertain clues. In this paper, we suggest that the unique MES based on RFID and Bayesian Network can immediately track the product unit, and show how to evaluate it.

• Journal of Ecology and Environment
• /
• v.34 no.4
• /
• pp.411-423
• /
• 2011

This study was conducted to quantify soil $CO_2$ efflux using the continuous measurement method and to examine the applicability of an automatic continuous measurement system in a Korean deciduous broad-leaved forest. Soil respiration rate (Rs) was assessed through continuous measurements during the 2004-2005 full growing seasons using an automatic opening/closing chamber system in sections of a Gwangneung temperate deciduous forest, Korea. The study site was an old-growth natural mixed deciduous forest approximately 80 years old. For each full growth season, the annual Rs, which had a gap that was filled with data using an exponential function derived from soil temperature (Ts) at 5-cm depth, and Rs values collected in each season were 2,738.1 g $CO_2$ $m^{-2}y^{-1}$ in 2004 and 3,355.1 g $CO_2$ $m^{-2}y^{-1}$ in 2005. However, the diurnal variation in Rs showed stronger correlations with Ts (r = 0.91, P < 0.001 in 2004, r = 0.87, P < 0.001 in 2005) and air temperature (Ta) (r = 0.84, P < 0.001 in 2004, r = 0.79, P < 0.001 in 2005) than with deep Ts during the spring season. However, the temperature functions derived from the Ts at various depths of 0, -2, -5, -10, and -20 cm revealed that the correlation coefficient decreased with increasing soil depth in the spring season, whereas it increased in the summer. Rs showed a weak correlation with precipitation (r = 0.25, P < 0.01) and soil water content (r = 0.28, P < 0.05). Additionally, the diurnal change in Rs revealed a higher correlation with Ta than that of Ts. The $Q_{10}$ values from spring to winter were calculated from each season's dataset and were 3.2, 1.5, 7.4, and 2.7 in 2004 and 6.0, 3.1, 3.0, and 2.6 in 2005; thus, showing high fluctuation within each season. The applicability of an automatic continuous system was demonstrated for collecting a high resolution soil $CO_2$ efflux dataset under various environmental conditions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1001-1006
• /
• 2016

As consumption of energy is increasing rapidly, energy saving is emphasized in nowadays. Thermal power plant occupies a large proportion in various type of power plant. Major causes of decreased power generation efficiency on thermal power stations is deposition of fly ash. Soot Blower is a facility to remove the ash which is deposited outside of tube by steam blowing on boiler. Residual stream which caused by lance tube in soot blower cannot be discharged steam effectively in lance tube causes reducing the thickness of lance tube. On the contrary, increasing discharge ratio of steam, lance tube cannot sustain proper pressure to remove ash on tube. This study suggests increasing discharge ratio of steam with proper pressure to remove ash on tube by optimization on shape of lance tube nozzle. To optimize shape of nozzle, discharge ratio and maximum blowing pressure on nozzle is selected as object functions. Diameter of nozzle, distance between nozzles, angle of nozzle and gap between nozzle is selected as design parameters. Then the design of experiment (DOE) with an orthogonal array is performed to analyze the effect of design parameters. And grey relational analysis and analysis of mean (ANOM) is performed to optimize shape of lance tube.

• 한국무역상무학회:학술대회논문집
• /
• 2004.12a
• /
• pp.9-40
• /
• 2004

"UNIDROIT Principles 2004" focused on an enlargement rather than a revision. An additional Section or Chapter so to speak, which are about, the Authority of a Agents, Third Party Rights, Set-off, Assignment of Rights, Transfer of Obligations and Assignment of Contracts, and Limitation Periods have been added, while the only change of substance made to the 1994 Edition, apart from two paragraphs in the Preamble, and three new provisions in Chapter 1 and 2 which are necessary to adapt the Principles to the needs of electronic contracting. The Principles which have the nature of the restatement of international uniform laws (for example CISG) are continuous exercise. Therefore we should note whether in the future our concerns would be on a additional topics on a improvement of the current text by monitoring the reception of the "UNIDROIT Principles 2004" in practice, and the application by contracting parties. The purposes of the Principles may be classified into three ; the rules of law governing the contract, means of interpreting and supplementing international uniform law or domestic law, or models for national and international legislator. Among them, the function of governing law may be applied by the express choice by the parties or by the implied choice like "general principles of law" or "les mercatoria", and it may be applied in the absence of any choice of law by the parties. Among there importance functions, this writer would like to emphasize the function to supplementing international uniform law instruments. The reason is that the CISG which has been established as an international uniform sales act and to which our country would be a contracting State from March, 2005, needs a lot of gap-filling. For this purpose it is advisable the parties to insert following provisions in their contract. "This contract shall be governed by the CISG, supplemented when necessary by the UNIDROIT Principles 2004" Thus success in practice of the UNIDROIT Principles over the last then years has surpassed the most optimistic expectations. It is hoped that the 2004 Edition of the UNIDROIT Principles will be just as favorably received by legislators, business persons, lawyers, arbitrators and judges and become even better known and more widely used throughout the World.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.147-154
• /
• 1992

This paper describes the design of implantable 8-channel telemetering system to get physiological signals. The internal circuits of this system are designed not only to achieve as small size and low power dissipation as possible, but also to enable continuous measurement of physiological signals. Its main functions are to enable continuous measurement of physiological signals and to accomplish on-off power switching of an implantable battery by receiving appropriate command signals from an external circuit. To integrate implantable biotelemetry system, we performed layout of internal system using Lambda based $2{\mu}m$ n-well design rules. This system, used together with appropriate sensors, is expected to be capable of measuring and transmitting such significant parameters as pressure, pH, and temperature.

• Journal of Plant Biotechnology
• /
• v.30 no.1
• /
• pp.81-95
• /
• 2003

Carotenoids are synthesized from the plastidic glyceraldehyde-3-phosphate (GAP)/pyruvate pathway in isoprenoids biosynthetic system of plants. They play a crucial role in light harvesting, work as photoprotective agents in photosynthesis of nature, and are also responsible for the red, orange and yellow colors of fruits and flowers in plants. In addition to biological actions of carotenoids as antioxidants and natural pigments, they are essential components of human diet as a source of vitamin A. It has been also suggested that some kinds of carotenoids might provide protection against cancer and heart disease as human medicines. In this article, we review the commercial applications on the basis of biological functions of carotenoids, summarize the studies of genes involved in the carotenoid biosynthetic pathway, and introduce recent results achieved in metabolic engineering of carotenoids. This effort for understanding the carotenoids metabolism will make us to increase the total carotenoid contents of crop plants, direct the carotenoid biosynthetic machinery towards other useful carotenoids, and produce a new array of carotenoids by further metabolizing the new precursors that are created when one or two key enzymes in carotenoid biosynthetic pathway are exchanged through gene manipulation in the near future.