• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1997-2003
• /
• 2004

This paper presents a new method and an associated device, capable of detecting protein presence and size from the shift of the mechanical stiffness changing points due to the presence and size of proteins in a nano-gap actuator. Compared to the conventional resonant detection method, the present nanomechanical stiffness detection method shows higher precision for protein detection. The present method also offers simple and inexpensive protein detection devices by removing labeling process and optical components. We design and fabricate the nanomechanical protein detector using an electrothermal actuator with a nano-gap. In the experimental study, we measure the stiffness changing points and their coordinate shift from the devices with and without target proteins. The fabricated device detects the protein presence and the protein size of 14.0$\pm$7.4nm based on the coordinate shift of stiffness changing points. We experimentally verify the protein presence and size detection capability of the nanomechanical protein detector for applications to high-precision biomolecule detection.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.80-83
• /
• 2022

This paper proposes an initial rotor polarity detection algorithm of a single-phase permanent magnet synchronous motor (SP-PMSM) related to stable open-loop starting for sensorless operation. Generally, the SP-PMSM needs an asymmetric air-gap structure to can avoid the initial starting failure at zero torque point. Therefore, the rotor polarity information can be obtained by using the DC offset current direction of a stator current through a high frequency voltage injection into an SP-PMSM with an asymmetric air gap. In this paper, the proposed rotor initial polarity detection algorithm is verified through several experimental results.

• 한국의학물리학회지:의학물리
• /
• 제17권4호
• /
• pp.252-259
• /
• 2006

갭 정션(gap junction)은 다양한 세포에 분포되어 있으며 분자 수준의 작은 물질들이 자유롭게 교환되는 전기적 시냅스다. 망막에서, 갭 정션의 차단이 동물의 동작 감지(motion detection)에 실제적으로 어떤 영향을 주는지에 대해서는 거의 조사되지 않았다. 본 연구에서는, 망막 세포간의 전기적 시냅스를 조절하는 약물이 금붕어의 동작 감지에 어떠한 영향을 주는지를 조사하기 위해 시각운동 반응(optometer response, OMR)이 사용되었다. 갭 정션 차단제인 carbenoxolone, 8-bromo cyclic AMP, sodium nitroprusside (SNP), 8-bromo-cyclic GMP 등의 초자체 내 주사는 광- 및 암-상태에서 모두 OMR을 감소시켰다. 광-상태에서 dopamine, SKF-38393 및 eticlopride의 주사는 OMR을 감소시킨 반면 SCH-23390의 주사는 OMR을 증가시켰다. 암-상태에서는 결과가 반대로 나타났다: 즉 dopamine, SKF-38393 및 eticlopride의 주사는 OMR을 증가시킨 반면 SCH-23390의 주사는 OMR을 감소시켰다. 이러한 결과는 망막 세포들 사이의 갭 정션이 금붕어의 동작 감지에 중요한 역할을 담당하고 있음을 시사한다.

• 재활복지공학회논문지
• /
• 제7권1호
• /
• pp.45-50
• /
• 2013

최근, 동물에 대한 객관적 이명 유무 검사인 GPIAS (gap prepulse inhibition of acoustic startling) 방법이 보고된바 있으나 동물과 달리 큰 자극음에 의한 놀람 반응 (startling response)을 사람에게서 측정하는 것은 어렵기 때문에, 청성 유발 반응과 같은 뇌파 신호를 측정하는 것이 사람 이명 검사법 연구에 보다 적합하다. 본 연구에서는 GPIAS 방법에서 사용하는 gap prepulse 기반의 소리 자극법을 자유롭게 적용할 수 있으며, 청각 심리학적 현상인 이명과 연관된 대뇌 피질 활동을 반영하는 청성 후기 반응 (auditory late latency response, ALLR) 뇌파를 간편하게 측정할 수 있는 청성 후기 반응 측정 시스템을 구현하였다. 또한, 구현된 시스템을 정상 청력을 가진 8인의 피험자에게 적용하는 실험을 통해 gap prepulse 기반의 소리자극에 의한 청성 후기 반응의 N1-P2 첨두치 크기를 측정하였고, gap prepulse에 의한 N1-P2 억제율 현상을 확인 및 평가하였다. 이를 통해, 구현된 청성 후기 반응 측정 시스템이 향후 gap prepulse 소리 자극법에 기반한 객관적 이명 검사법 연구 및 검증 도구로서 이용될 수 있음을 확인하였다.

• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.79-88
• /
• 1996

For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.922-927
• /
• 2007

The present urban maglev which has been developed in Korea is controlled by 4-edge control method over each bogie. The control output which is derived from two gap sensors and one vertical acceleration sensor controls magnet to maintain a nominal gap. But, the gap signal acts as a big disturbance in rail joint though two gap sensors are used and finally result in unstable response and poor ride comfort. This paper treats of a method to compensate the gap signal in rail joint for the levitation control of urban maglev. The physically abnormal change of gap is detected when one gap sensor passes a rail joint, the disturbance of gap in rail joint is estimated. Finally the disturbance in gap signal is eliminated by processing the information of vehicle speed and estimated disturbance in when the other gap sensor passes a rail joint.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1722-1741
• /
• 2017

Intrusion detection techniques based on virtual machine introspection (VMI) provide high temper-resistance in comparison with traditional in-host anti-virus tools. However, the presence of semantic gap also leads to the performance and compatibility problems. In order to map raw bits of hardware to meaningful information of virtual machine, detailed knowledge of different guest OS is required. In this work, we present VDSM, a lightweight and general approach based on driver separation mechanism: divide semantic view reconstruction into online driver of view generation and offline driver of semantics extraction. We have developed a prototype of VDSM and used it to do intrusion detection on 13 operation systems. The evaluation results show VDSM is effective and practical with a small performance overhead.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권5호
• /
• pp.51-60
• /
• 2020

The paper examines the characteristics and causes of the expectation gap of audit and assurance services. The paper has conducted three surveys with three target groups. In the first survey, participants are auditors, users of audit reports are subject in the second survey and in the third survey, and students major in auditing are selected. The content of the survey aims to find out the differences in perception of the survey participants on two issues: (i) responsibilities of auditors for detection frauds, errors, protection of the enterprise's assets and financial scandals, and (ii) the role of audit and auditors in making investment decisions and investor's belief. The research carried out survey from March to September 2019 with 165 responds. The collected data was processed by statistical software SPSS, version 23, and Mann-Whitney U test was used to analyze the results of the audit expectation gap between the auditor group and the users of audit report group and between the student group and users of audit report group. The results showed that there exists an expectation gap in the responsibility of auditors for detection of all frauds, errors and protection enterprise's assets. Recommendations include strengthening audit standards, penalizing bad practices and ensuring auditor's independence.

• 디지털융복합연구
• /
• 제16권12호
• /
• pp.309-315
• /
• 2018

방전 현상을 에너지로 이용하여 금속을 가공하는, 특히 초경 및 난삭 소재의 가공과 정밀가공에 효과적인 방전가공 시 빠른 가공속도와 향상된 정밀도 및 면조도를 달성하기 위하여 효율적인 아크의 검출과 제어방법에 대해 연구하였다. 단일 방전 파형을 Td(Time-Delay), Ton(Time-on), Toff(Time-off)의 세 가지 구간으로 나누어 HDL 언어를 이용하여 게이트 제어 타이밍을 시뮬레이션 하고, 실제 방전가공기에 적용하여 파형을 실측하였으며, 비교기 회로를 통한 Td 구간의 샘플링을 통해 서보기구의 동작을 결정함으로써 전극과 가공물 간의 간격 제어와 가공 결과에 미치는 영향을 분석하였다. 분석결과 형성되는 파형의 Td 구간을 보다 정밀하게 고속으로 샘플링하여 이를 토대로 전극과 가공물 간의 gap 제어에 적용하였을 때 보다 향상된 결과를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2552-2554
• /
• 2001

This paper presents a front-end electronic circuits for signal detection on multi-gap resistive plate. The input to the circuit is the signal(voltage : -800mv, frequency : 20${\sim}$40MHZ, noise : 50mv, 1GHz) from the multi-gap resistive plate chamber and the output is the 5v pulse signal. The front-end electronic circuit consists of preamplifier, peak-detector, and comparator. Spice simulation show that the circuit has the better response time than the one of the conventional measuring instruments.