• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of Family Resource Management and Policy Review
• /
• v.11 no.4
• /
• pp.55-71
• /
• 2007

The purpose of this study was to explore a self-diagnostic indicator for measuring a healthy family by adopting the theme of "happiness", which has surfaced as the most interesting in many academic fields recently. Though the basic concept of a healthy family may be shared by everyone, the criterion of happiness varies from one family to another. Therefore, it is desirable that the tool be made in such a way that every member of the family can check their health from a holistic perspective, rather than diagnosing health and happiness from the perspective of professionals. So, this study was aimed at diagnosing a family by using a tool named GAMMA model, so each family member can recognize problems and find the best options to solve it. This study. has a significant meaning in that it has tried to diagnose families by introducing the GAMMA model into domestic science for the first time.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1329-1341
• /
• 2006

When X and Y have independent gamma distributions, we consider the testing problem for two gamma means. We propose a solution based on a Bayesian model selection procedure to this problem in which no subjective input is considered. The reference prior is derived. Using the derived reference prior, we compute the fractional Bayes factor and the intrinsic Bayes factors. The posterior probability of each model is used as a model selection tool. Simulation study and a real data example are provided.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3390-3397
• /
• 2022

Among the different techniques available, nuclear methods, including gamma-gamma logging tools, are of special importance. Though the real environment which surrounds the drilled borehole is a complex fractured medium which the fluid can flow through the porosities, simulation studies generally use the traditional model of a homogeneous mixture of formation and the liquid. Considering a previously published study, which shows that modeling of fluid flow in fractured reservoirs and simulating the formation as an inhomogeneous fractured medium leads to different results compared with those of homogeneous mixture, here we study the effect of the presence of drilling fluid (mudcake) on the response of the detectors in both the models. To study this effect, a typical gamma-gamma logging tool was modeled by using the MCNPX Monte Carlo code. The results show that the responses of the detectors in the mixture model in the presence of various thicknesses of mudcake are sensitive to the density of the formation material. However, this effect is not notable in the inhomogeneous fractured medium. These results emphasize the importance of the model employed for simulation of the medium in gamma-gamma well-logging.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.5
• /
• pp.497-509
• /
• 2006

Until recently, the tuberculin skin test (TST) has been the only tool available for diagnosing a latent TB infection. However, the development of new diagnostic tools, using the Mycobacterium tuberculosis (MTB)-specific early secreted antigenic target 6 (ESAT-6) and culture filtrate protein 10 (CFP-10) antigens, should improve the control of tuberculosis (TB) by allowing a more accurate identification of a latent TB infection (LTBI). Antigen-specific interferon-gamma ($IFN-{\gamma}$) assays have greater specificity in BCG-vaccinated individuals, and as less biased by nontuberculous mycobacterial infections. Many comparative studies have suggested that those assays have a higher specificity than the TST, and the sensitivity of these assays are expected to remarkably improved if more MTB-specific antigens can become available. Nevertheless, the major obstacle to the widespread use of these tests is the limited financial resources. Similar to other diagnostic tests, the predictive value of $IFN-{\gamma}$ assays depends on the prevalence of a MTB infection in the population being tested. Therefore, prospective studies will be meeded to establish the applicability of these new assays at multiple geographic locations among patients of different ethnicities, and to determine if the $IFN-{\gamma}$ responses can indicate those with a high risk of progressing to active TB.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2567-2571
• /
• 2023

Scintillator materials are widely used in the medical and industrial fields for imaging systems using gamma cameras. In this study, image evaluation is performed by modeling a gamma camera system based on a lutetium-yttrium oxyorthosilicate (LYSO) scintillation detector using a pinhole collimator that can improve the spatial resolution. A LYSO detector-based gamma camera system is modeled using a Monte Carlo simulation tool. The geometric concept of the pinhole collimator is designed using various magnification factors, and the spatial resolution is measured using the acquired source image. To evaluate the resolution, the full width at half maximum (FWHM) and natural image quality assessment (NIQE), a no-reference-based parameter, are used. We confirm that the FWHM and NIQE values decrease simultaneously when the diameter of the pinhole collimator increases. Additionally, we confirm that the spatial resolution improves as the magnification factor increases under the same pinhole diameter condition. Particularly, a 0.57 mm FWHM value is obtained using the modeled gamma camera system with a LYSO scintillation detector. In conclusion, our results demonstrate that a pinhole collimator with a LYSO scintillation detector is a promising gamma camera imaging system.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3844-3853
• /
• 2023

Although radiation and chemotherapy methods for cancer therapy have advanced significantly, surgical resection is still recommended for most cancers. Therefore, intraoperative imaging studies have emerged as a surgical tool for identifying tumor margins. Intraoperative imaging has been examined using conventional imaging devices, such as optical near-infrared probes, gamma probes, and ultrasound devices. However, each modality has its limitations, such as depth penetration and spatial resolution. To overcome these limitations, hybrid imaging modalities and tracer studies are being developed. In a previous study, a multi-modal laparoscope with silicon photo-multiplier (SiPM)-based gamma detection acquired a 1 s interval gamma image. However, improvements in the near-infrared fluorophore (NIRF) signal intensity and gamma image central defects are needed to further evaluate the usefulness of multi-modal systems. In this study, an attempt was made to change the NIRF image acquisition method and the SiPM-based gamma detector to improve the source detection ability and reduce the image acquisition time. The performance of the multi-modal system using a complementary metal oxide semiconductor and modified SiPM gamma detector was evaluated in a phantom test. In future studies, a multi-modal system will be further optimized for pilot preclinical studies.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.1
• /
• pp.13-22
• /
• 2021

Objective : High precision and accuracy are expected in gamma knife radiosurgery treatment. Because of the requirement of clinically applying complex radiation and dose gradients together with a rapid radiation decline, a dedicated quality assurance program is required to maintain the radiation dosimetry and geometric accuracy and to reduce all associated risk factors. This study investigates the validity of Leksell Gamma plan (LGP)10.1.1 system of 5th generation Gamma Knife Perfexion as modified variable ellipsoid modeling technique (VEMT) method. Methods : To verify LGP10.1.1 system, we compare the treatment plan program system of the Gamma Knife Perfexion, that is, the LGP, with the calculated value of the proposed modified VEMT program. To verify a modified VEMT method, we compare the distributions of the dose of Gamma Knife Perfexion measured by Gafchromic EBT3 and EBT-XD films. For verification, the center of an 80 mm radius solid water phantom is placed in the center of all sectors positioned at 16 mm, 4 mm and 8 mm; that is, the dose distribution is similar to the method used in the x, y, and z directions by the VEMT. The dose distribution in the axial direction is compared and analyzed based on Full-Width-of-Half-Maximum (FWHM) evaluation. Results : The dose profile distribution was evaluated by FWHM, and it showed an average difference of 0.104 mm for the LGP value and 0.130 mm for the EBT-XD film. Conclusion : The modified VEMT yielded consistent results in the two processes. The use of the modified VEMT as a verification tool can enable the system to stably test and operate the Gamma Knife Perfexion treatment planning system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.108-114
• /
• 2008

Uniaxial tension and compression test were conducted on conventional and crosslinked ultra-high molecular polyethylene (UHMWPE) all prepared from the same lot of medical grade GUR 1050. The conventional materials were unirradiated and gamma irradiated with $25kGy{\sim}200kGy$. Gamma irradiated processing was found to significantly impact the crystallinity, and hence the mechanical behavior, of the highly crosslinked UHMWPE. The crystallinity and radiation dose were key predictors of the uniaxial yielding, hardness, plastic flow, and failure properties of conventional and highly crosslinked UHMWPE. The correlation model from experiments would be the basic information to design the liner of artificial joint.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.215-219
• /
• 2010

We have subjected to gamma-irradiation to citrus buds and then grafted onto mature citrus tree. Mutant citrus branch lines have been induced. As a result of first selection, we found the several mutant lines showing interesting phenotypes such as higher sugar content. We have selected several branches showing good qualities such as higher sweetness and/or lower acidity. Some branch lines showed over $13^{\circ}Brix$ sugar content and below 0.9% acidity. Other mutant branch lines showed the changes of shape, size, peel thickness, and fiber contents or distribution of fruits. The results suggest that gamma-irradiation is an effective tool for induction of citrus mutant lines.