• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.72-75
• /
• 2017

본 논문은 소형화와 고이득을 위하여 패치 안테나에 원형 슬릿을 구현하였으며 900 MHz 대역에서 동작이 되도록 설계하였다. 사각형 모양의 패치형태를 변형하여 안테나 크기를 일차적으로 줄였으며 나아가 패치 안에 원형 슬릿을 추가하여 추가적으로 안테나의 크기를 감소시켰다. 원형슬릿의 개수와 반지름을 설계 변수로 설정하여 원하는 대역에서 반사손실을 약 -30 dB까지 되도록 Tuning 하였으며 방사패턴의 최대 이득도 약 4 dBi에 이르도록 안테나의 설계를 수행하였다. 원형슬릿이 존재하지 않는 경우 대비 약 20 MHz 정도의 공진 주파수 하향천이를 구현하여 본 논문에서 설계한 안테나의 소형화가 달성되었음을 증명하였다.

• ETRI Journal
• /
• 제27권5호
• /
• pp.484-490
• /
• 2005

We fabricated 40 Gb/s front-end optical receivers using spot-size converter integrated waveguide photodiodes (SSC-WGPDs). The fabricated SSC-WGPD chips showed a high responsivity of approximately 0.8 A/W and a 3 dB bandwidth of approximately 40 GHz. A selective wet-etching method was first adopted to realize the required width and depth of a tapered waveguide. Two types of electrical pre-amplifier chips were used in our study. One has higher gain and the other has a broader bandwidth. The 3 dB bandwidths of the higher gain and broader bandwidth modules were about 32 and 42 GHz, respectively. Clear 40 Gb/s non-return-to-zero (NRZ) eye diagrams showed good system applicability of these modules.

• Asian-Australasian Journal of Animal Sciences
• /
• 제10권2호
• /
• pp.178-184
• /
• 1997

Purified diets containing five graded levels of lysine were fed to a total of 125 growing chicks (25 chicks per treatment) to evaluate lysine requirements for growth and maintenance. A model was developed to separate lysine requirement for maintenance from requirement for growth. Based on weight gain response, the daily lysine requirement for growth was 12.06 mg/g gain and the daily lysine requirement for maintenance was 0.332 times metabolic body size ($W^{0.75}$). Similarly, the lysine requirement for growth was 0.457 mg/mg nitrogen gain and the daily lysine requirement for maintenance was 0.344 times metabolic body size. The plateau of plasma lysine concentration was reached at 354.75 mg intake/day. The total lysine requirement was 414.27 mg/day or 1.0% of the diet, 420.11 mg/day or 1.01% of the diet based on weight gain response and N gain response, respectively. Previous lysine requirements for growing chicks of 1-28 days old were in close agreement with these estimates. As a percentage of protein, lysine requirement was calculated to be 7.3% and the reported lysine content of chick muscle crude protein of 7.46% was closely related.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.9-16
• /
• 2003

In this study, the decision of dressing time for diamond wheel was analyzed by observing with acoustic emission signals and surface roughness, and also obtained the machining characteristics by weibull distribution plot for the values of bending strength. From the experimental study, it was possible to predict the time of re-dressing for the diamond grinding wheel with the analysis of acoustic emission signals and surface roughness values, and following conclusions were obtained. The root-mem-square values of acoustic emission signals were obtained low as the increased of table speed for different abrasive grain size. This is caused by the lack of grinding power which is not able to get rid of all real grinding mass of depth as the table speed is increased. The values of bending strength for ground $Si_3 N_4$ specimens were decreased for gain size of #400 than that of #60, but it was found that the surface roughness values for gain size of #60 were better than that of #400. As compared the shape parameter of weibull distribution plot for the values of bending strength, it was found that the reliability of bending strength for grain size of #60 increased than that of #400.

• Nutritional Sciences
• /
• 제9권3호
• /
• pp.173-178
• /
• 2006

The purpose of this study was to investigate the effects of wax gourd on body weight, body fat, triglyceride, leptin and fat cell size in rats fed medium fat Male Sprague Dawley rats were fed with experimental diet containing total dietary fat at 20% of calorie with wax gourd (WG) for 4 weeks. Forty rats were divided into 4 groups including control, 5, 10, and 15% (w/w) WG supplement The results showed that weight gain was significantly higher in 5% WG than that in control (p<0.05), but was not different among the WG supplement groups. Total fat weight was significantly decreased in both 10 and 15% WG supplement groups than that of control. The levels of triglycerides and free fatty acids in the plasma were significantly decreased, particularly in 15% WG supplement group (p<0.05). The levels of leptin was not significantly different among the experimental groups. Fat cell size was significantly decreased in WG supplement groups compared to that of control group (p<0.05). Correlation among the parameters demonstrated that weight gain correlated positively with total fat weight, the levels of leptin and triglycerides. Taken these results together, 15% WG supplement diet substantially reduces total fat weight, triglycerides and free fatty acids levels and fat cell size in the rat fed midium fat.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.675-678
• /
• 1998

In this paper, power amplifiers for PCS phone were designed with the GEC Marconi H40 HEMT libray. The 1st stage was carefully designed in order to obtain k〉1 using a parallel resistor, and its S21 gain of 18.3dB and input reflection coefficient of -4dB were obtained. And S21 gain of 18dB and input reflection coefficient of -7dB were obtained from the 2nd stage. Finally, total S21 gain of 38dB, input reflection coefficient of -16dB, power gain of 35.2dB, output power of 28.7dBm and PAE(power added efficiency) of 29% were obtained from the designed MMIC power amplifiers. The chip size is $1.729$\times$0.94\textrm{mm}^2.$

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.73-85
• /
• 1997

In a drop-on-demand thermal ink-jet printer, the dot size of an ink droplet expelled from a printer depends on the absorption of the paper. This causes severe differences between output images on the different paper materials. In this paper, the color matching algorithm for different papers is proposed. To achieve corresponding color reproduction, dot gain compensatio nbased on saturation was applied to predict color reproduction on a printer. If the dot gain of pigment increases, the white portion of paper decreases while the saturation value increases monotonically. As the results of dot gain compensation, intensity change may appear. Therefore, an intensity compensation without any hue variation is followed to match the colors of different subtrates.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1254-1259
• /
• 2008

A new CMOS current-mode integrator for low-voltage analog integrated circuit design is presented. The proposed current-mode integrator is based on cross-coupled gain-boosting topology. When it is compared with that of the typical current-mirror type current-mode integrator, the proposed current-mode integrator achieves high current gain and unity gain frequency with the same transistor size. As a application circuit of the proposed integrator, we designed the 1.8V 200MHz band current-mode lowpass filter. These are verified by Hspice simulation using $0.18{\mu}m$ CMOS technology.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1249-1254
• /
• 2006

Existing adaptive observers may cause the parameter drifts due to disturbances even if state estimation errors remain small. To avoid the drift phenomena in the presence of bounded disturbances, several robust adaptive observers have been introduced addressing bounds in state and parameter estimates. However, it is not easy for these observers to manipulate the size of the bounds with the selection of the observer gain. In order to reduce estimation errors, this paper introduces the (equation omitted) gain minimization problem in the adaptive observer structure, which minimizes the (equation omitted) gain between disturbances and estimation errors. The stability condition of the adaptive observer is reformulated as a linear matrix inequality, and the observer gain is optimally chosen by solving the convex optimization problem. The estimation performance is demonstrated through a numerical example.