• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.493-498
• /
• 1993

This paper proposes a high precision measurement technique to obtain the height of gage block. The proposed technique is consisted of two steps : In the first step, laser position transducer and electric micrometer are adopted to obtain a coarse value of the height of gage block, and then, second, heterodyne laser interferometry is adopted to acquire the precision value. The experiment results show that accuract in the order of a few nanometer is achieved for the gage blacks of as high as a few millimeter.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.304-309
• /
• 2000

Strain gage method is used to evaluate the mode I dynamic stress intensity factor of marging steel(18Ni) and titanium alloy(Ti-6A1-4V). To decide the best strain gage position on specimen, static fracture toughness test was performed. Then instrumented charpy impact test and dynamic tensile test was performed by using strain gage method for evlauating dynamic stress intensity factor. Strain gage signals on the crack tip region are used to calculate the stress intensity factors. It is found that strain gage method is more useful than method by using load which is obtained from impact tup to assess dynamic characteristics such as dynamic stress intensity factor.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.128-135
• /
• 1996

This paper proposes a high precision measurement technique to obtain the height of gage block with a few millimeter height. The proposed technique is consisted of two steps : In the first step, laser position transducer and electric micrometer are adopted to obtain a coarse value of the height of gage block, and then, in the second step, heterodyne laser interferometry is adopted to acquire the precision value. A new kind of phase detector is constructed in the low cost for the heterodyne interferometer and its linearity with ${\pm}1%$ is confirmed by experiment. Also measurement error factors due to enviroments are discussed and methodology to reduce such errors is proposed. Preliminary experiments are carried out for the gage blocks of as high as a few millimeter.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.13-21
• /
• 2002

The tincture toughness is evaluated by using U(compact tension) and 3PB(three point bending) specimens of AI alloys far propulsive engine. To evaluate the static fracture toughness, strain gage method is used. The static fracture toughness obtained from the strain measurement is compared with the results by ASTM standard and FEM analysis. For the reliable evaluation of fracture toughness, strain gages are attached at various positions.

• 한국추진공학회지
• /
• 제4권1호
• /
• pp.53-64
• /
• 2000

모드 I 응력확대계수를 결정하기 위한 스트레인게이지법이 연구되었다. CT 시험편과 3점 굽힘 시험편이 사용되었다. 시험편의 예리한 노치부는 와이어 방전 가공에 의하여 제작되었다. 균열 선단 영역으로부터 얻은 스트레인게이지 신호는 응력확대계수를 계산하는데 사용되었다. 시험 결과는 ASTM E399에 의하여 얻어진 결과 및 유한요소해석 결과와 비교하였다. 시험 결과들과 유한요소해석 결과는 잘 일치하였다. 이 방법을 적용할 때 스트레인게이지 부착 위치는 신중히 고려되어야 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1416-1418
• /
• 1994

Expressions for the displacement of a bimorph, one end fixed and the other free, has been introduced when sinusoidal inputs were applied to the ceramic plates on a thin metal plate. Maximum displacements at the free end and strains at the position of strain gage attached were measured when various wave forms, voltages, and frequencies were applied to the bimorph whose length is 6.6[cm], width 2.5[cm], and thickness 0.0365[cm]. Under the constant voltage ( $70[V_{peak}]$ ), the strains and the displacements at the free end were larger than the case of the sinusoidal input when the square wave was applied and were smaller when triangular wave. It was shown that the displacements at the free end and the strains of the gage position were increased as the applied voltage in the range of $30-90[V_{peak}]$ and effective length were increased. And it was also found that the resonant frequency of a bimorph was decreased as its effective length was increased, and that the displacements and the strains were maximum at the resonant frequency.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.219-225
• /
• 2006

This paper studies on the visibility of dashboard in forklift. As part of the real setting devised for this study, 1. Important evaluation by males experience in forklift driving, 2. Icon cognition experiment, 3. Gage cognition experiment, subjects were asked to estimate the important evaluation, sketched to icon and gage position on the screen. Subjective evaluations were carried out by semantic differential method, sketch method, sketch method, then analyzed by consistency test, frequency rate and T-test. I gather the results concerning the relationship between consistent answers and cognition rates of dashboard understand the conditions which create a desired instrument panel.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.317-324
• /
• 2001

This study deals with high power Nd:YAG laser welding of thin steels for small pressure vessels. Full penetration welding at the overlap joint was performed so as to assure sufficient weld strength. Results showed that mid-depth weld size reduced drastically with increasing the travel speed. Position of focus had little effect on the bead formation even though short focal system was used. However, the shape factor and the bead width had closely related with the position of focus. Based on the microstructural inspection, acceptable weld was obtained when the overlap clearance was controlled up to 20% of the base metal thickness. In the case that the joint contained more clearance than the critical value, both the tensile shear strength and the tear strength were reduced. Results also demonstrated that shielding gases were proved to play a key role as far as the bead formation characteristics was taken into consideration. Blowing dry air through 5mm in diameter nozzle produced narrower bead cross-section than that of argon or nitrogen shielding.

• 재활복지공학회논문지
• /
• 제7권2호
• /
• pp.1-5
• /
• 2013

본 논문에서는 슬관절 의지 장치의 무릎 각도 제어를 통해 보행 상태를 추론하는 방법을 제안한다. 슬관절 의지의 제어에서 절대위치 엔코더를 이용해 무릎의 각도를 측정하고, 스트레인 게이지를 통해 발바닥의 부하를 측정하여 현재 보행 상태를 추론할 수 있다. 본 논문에서는 2개의 센서를 사용하여 현재 보행 상태를 4가지 상태로 추론하는 방법을 제안하였으며, 실험을 통하여 제안된 방법의 유효성을 보였다.

• 산업경영시스템학회지
• /
• 제28권4호
• /
• pp.48-54
• /
• 2005

Recently, a couple of process capability indices are used to evaluate that the outputs of the process satisfy the specifications. An assumption of those indices is that the specifications of the characteristics are given single constant value. The display panel is a highly precise product and all the specifications of measure points are designed by their locations in the panel. So it is very difficult to locate the measurement facility to the exact position. In this paper, we propose a new process capability index in case of multi specifications and unfixable objects.