A period study of the semi-detached eclipsing binary system W Delphini based on the extensive series of minimum timings covering more than a century(109 years) indicates a cyclic(O-C) variation of the system. This variation can be explained as due either to (1) stellar magnetic activity cycles of the cool subgiant G5 secondary component of the binary with a subsurface magnetic field equals to 3 kG, or (2) a long-term orbital period increases with a rate of $1.68{\times}10^{-8}$ day/cycle caused by a mass transfer rate of $4.9{\times}10^{-8}M_{\odot}yr^{-1}$ from the less to more massive component modulated by a light time effect due to a hypothetical third body with period of $53.4{\pm}1.06$ years. The former explanation is more recommended than the later one since the obtained third body mass value($M_3=1.58\;M_{\odot}$) is quite large but it can not manifest itself observationally and also it cannot be a white dwarf. In the contrary, from the magnetic activity point of view, the obtained characteristics are in good consistent when applying Applegate(1992) mechanism. However, further precise photometric and CCD observations for minima timings with brightness determinations are needed to confirm the present solution.
This paper describes a model-based software development methodology for AUTOSAR-ready light software architecture(AUTOSAR-Lite). The proposed methodology briefly represents an application software modeling technique using Matlab/Simulink. Using the proposed technique, application software architecture elements (e.g. software components, runnables, and interfaces) and functional behaviors can be designed in a single modeling environment. From the designed model, the codes of application software is automatically generated using Real-Time Workshop Embedded Coder. The generated application software is easily integrated with hand-coded basic software using the proposed method. In order to evaluate the proposed methodology, a diesel engine management system for a passenger car was employed as a case study. Based on the methodology, 8 atomic software components and 52 runnables are successfully developed, and they are evaluated by engine experiments. From this case study, AUTOSAR compatible model-based application software was successfully developed, and the effectiveness of the proposed methodology was evaluated.
This study evaluated the contact resistance, insulation resistance, withstand voltage characteristics and insertion force, etc., of the wire connector used inside an integrated LITE WAY lighting fixture developed for efficient installation. Since the connector connecting the lighting fixture's internal wires is housed, it is easily connected and separated and has a structure enabling a close-fitting connection. The temperature and time applied to the high temperature characteristics test of the connector are $105^{\circ}C$ and 16 hours, respectively. The measured contact resistance of the high temperature tested connector was 3.258 mV/A, and its measured insulation resistance was greater than $10\;G{\Omega}$ All specimens demonstrated uniform insulation characteristics, which could be seen to be in good condition. From the withstand voltage test results found before and after performing the high temperature operation test on the connector for cable connection, it was confirmed that the withstand voltage characteristics between all terminals were good. The insertion force of the connector connecting the internal wiring averaged 9.67 kgf. It was observed that the insertion force between the plug housing and the female terminal, and that between the plug housing and the male terminal, were 0.680 kgf and 1.27 kgf on average, respectively.
This study intended to compare the productive performance of three different layer raising systems; conventional cage (CC), barn (BR) and aviary (AV). The AV is welfare bestowed housing that allows free locomotion for birds within the BR. The BR allows bird's free locomotion inside BR but without multilevel structures. Both pullets and cockerels were housed together in both AV and BR, but only pullets in CC. Seventeen weeks old Lohmann Brown Lite (n = 800) pullets were housed in AV during this study. The same age layer pullets were simultaneously assigned to either at CC or BR to compare egg production performance with AV. The duration of experiment was 40 weeks (from 21st to 60th week). There were no remarkable differences in egg production, hen day egg production (HDEP) and average egg weight among three rearing systems. First 20 weeks (phase-1) average HDEP (%) of AV, CC, and BR were 85.9, 88.8, 87.1 and average egg weights (g) were 57.5, 59.9, and 56.9 respectively. Those of the remaining 20 weeks (phase-2) were 87.1, 87.9, 85.5 and 64.2, 63.0 62.1, respectively. Daily feed intakes (122 g, 110 g, 125 g); feed conversion ratio (2.4, 2.1, 2.5) and daily egg mass (53.9 g, 54.4 g, 52.8 g) data from AV, CC, and BR were not influenced significantly by the respective raising systems. Daily feed intake of layers in both AV (124 g) and BR (127 g) tended to be higher than that in CC (113 g) during phase-2. Overall, exterior egg quality (dirty and cracked eggs) in both phases was superior in BR compared with AV and CC, whereas CC generated intermediate results. This study indicated that the HDEP per se in AV and BR were not significantly different from that in CC. The study implied that the facility depreciation cost for AV and cost for increased feed intake in AV compared to CC are believed to be critical to evaluate the cost effectiveness of egg production in AV.
Sixty four, 30-week-old, Lohmann Brown-Lite laying hens were randomly allocated to one of four treatments with eight replicates per treatment and two hens per replicate for a 10 week study. The control diet was a high energy (11.81 MJ/kg) diet and the moderate energy (11.39 MJ/kg) diets were formulated dropping the level of animal fat. The three moderate energy diets were fed either unsupplemented (0.0%) or supplemented with 0.05 or 0.10% glycine. There were no significant differences (p>0.05) in hen-day egg production, egg weight, feed intake or feed conversion between birds fed the unsupplemented moderate energy and high energy diets. Significant differences were detected concerning egg components and quality measurements as assessed by albumen percentage (p = 0.02), yolk weight (p = 0.02), yolk percentage (p<0.01), yolk to albumen ratio (p<0.01) and yolk color (p = 0.01) between birds fed the unsupplemented moderate and high energy diets. Glycine supplementation of the moderate energy diet linearly increased (p<0.01) egg weight and feed intake with no significant (p>0.05) effects on egg production or feed conversion. Glycine supplementation significantly increased egg content (p<0.01), albumen weight (p<0.01) and percentage (p<0.01) as well as yolk weight (p<0.01) while yolk percentage (p = 0.04), yolk to albumen ratio (p = 0.01) and egg shell percentage (p<0.01) were linearly decreased. Supplementation with glycine produced a tendency (p = 0.09) towards an increase in the percentage of large eggs (63-72.9 g) produced with a concomitant decrease in the percentage of small (below 53 g) eggs (p = 0.09). The overall results of this study indicate that glycine supplementation of laying hen rations has the potential to increase egg production and weight. These increases appeared to be mediated through increases in feed intake and the ileal digestibility of fat and energy.
Developing carbohydrate fat replacer as materials for low-calorie and low-fat food made of Korean potato, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. Observing modified starch(treated in different method) by SEM, EZ(treated by enzyme) showed shape of deformed round oval, AC(treated by acetylation,), HPR(treated by hydropropylation) showed shape similar to that of NL(N-Lite), the commercial fat replacer. In the modified starch such as AC, peak in B and C type similar to those of general starch was found, but EZ showed non-crystalline shape. Compared to other modified starch, HPR, the chemically produced denatured starch showed very peculiar peak and structure in V-form. While the order of contents of amylopectin was in the order HPR > EZ > AC showed extremely high contents. Measuring the degree of gelatinization per the modified method, the degree of gelatinization of HPR as much higher than others. The water binding activity of modified starch was 240% in HPR. Measuring viscosity by producing general starch and modified starch as gel of 10% concentration, the CPS showed very high viscosity of 30.30 ${\times}$ 10$^3$ cp. Showing viscosity of 38.60, 31.60 10$^3$${\times}$ cp, the modified starch was in the order of HPR. While the calorie of starch of GPS was measured to be 3.0 Kcal/g, very low calorie those of chemically modified starch, HPR showed 2.5 Kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with saturated gel of starch and modified starch in constant rate through utilization of modified starch. Therefore, research and development for materials and related products which maintain the existing quality and reduce fat contents will be constantly performed in the future.
PURPOSE: The purpose of this study was to investigate the effect of multimodal intervention through VR (virtual reality)-based immersion program on the cognitive function and brain activity of patients with mild cognitive impairment. METHODS: The subjects of the study were 10 people in the experimental group who applied a complex intervention that performed cognitive tasks using the movement of the upper extremities through the VR program, and 10 people in the control group who received traditional occupational therapy. After the study intervention was applied 5 times a week, 30 minutes a day for a total of 8 weeks, LOTCA-G(Lowenstein Occupational Therapy Cognitive Assessment for Geriatric Population) and NIRSIT LITE were used to compare. RESULTS: Significant differences in cognitive function and brain activity were noted between the pre- test and post-test in the experimental group. Brain activity showed statistically significant differences in four channels of the working memory domain and one channel of the metacognitive domain (p < . 05). Comparative analysis of the difference between the two groups revealed statistically significant differences in cognitive function and brain activity. The brain activity showed statistically significant differences in three channels of the working memory domain and one channel of the metacognitive domain (p < .05). CONCLUSION: Through the results of this study, it was found that the complex intervention of performing cognitive tasks using upper extremity movements through the VR program had a positive effect on the cognitive function of patients with mild cognitive.
고정상곰팡이를 이용하여 세포내 축적 이차대사산 물인 cyclosporin A (Cy A)를 연속적으로 생산하 기 위해 perfusion 고정상연속배양을 수행하였다. 이를 위해 균사형성 생산균주인 T. inflaum을 cel lite에 고정화하는 데 필요한 공정을 획기적으로 단 순화시키는 방법을 제시하였다. 교반식 Perfusion 생물반응기 (Immobilized Perfusion Reacter S System, 이후 IPRS로 표기 내에 제한유지 된 고밀 도 고정상균체는 매우 높은 희석속도($0.1hr^{-1}$)에서 도 유리세포를 생산해내는 세포생생기의 역할을 훌 륭하게 수행하였으며, IPRS의 배출구를 통해 연속 적으로 유출되는 고농도의 유리세포(1.0g/$\ell$/hr)는 이차대사 결과 세포내에 축적되는 CyA를 연속생산 하는 데 이용될 수 있었다. 이러한 IPRS공정 운영 은 고정상균체를 배양액으로부터 효과적으로 분리시 키는 decanting column의 개발로 가능했요며, 이로 인해 기존의 연속현탁배양에서 문제시되었던 높은 희석속도에서의 wash-out현상이 극복될 수 있었다. 또한 유출되는 유리세포(relesed-free cell)의 mor-phology를 원형의 conidiospore나 잘게 부서진 myc celial cell로 구성되어 배양액의 rheology가 뉴튼유 체화될 수 있도록 IPRS공정을 운영함으로써, 기존 의 균사형성 미생물의 현탁배양시 나타나는 배양액 에서의 물질전달 감소현상이 뚜렷하게 개선될 수 있 었다. 유출되는 높은 균체생산성(1.0g/R/hr)을 감안할 때, 균주개발과 production배지의 최척화가 본 IPRS공정개발과 병행되는 경우 기존의 회분식배양 또는 연속현탁배양에 비해 훨씬 효과적 인 생산성 증 대를 기대할 수 있을 것으로 보인다.
쌈채소는 웰빙시대의 도래와 더불어 식생활에서 큰 변화를 주었고, 소비량이 계속적으로 증가하고 있다. 지금까지 국내에서는 배추, 상추 등 일부 채소 작물에 대한 쌈문화가 발달해 왔지만 최근 들어 다양한 종류의 쌈채소와 재배기술에 관한 연구가 활발하게 이루어지고 있다. 본 연구는 인공 광원으로 형광등을 이용하여 식물공장내에서 비트와 쌈추의 수량과 품질을 향상시키고자 수행하였다. 처리는 식물공장내 식물체로부터 30cm 위치에 자동센서를 설치하여 온도가 20, 25, $30^{\circ}C$가 유지 되도록 하였고, 광량은 $200{\mu}mol{\pm}20{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 고정하고 일장은 주야간이 12/12hr, 상대 습도 50-80%로 하였다. 모든 처리구의 근권부 전기전도도(EC)는 $2.0dS{\cdot}m^{-1}$로 공급하였으며 재배기간 pH는 6.1-7.2로 유지되었다. 그 결과 비트의 초장과 엽면적은 온도가 높았던 $25^{\circ}C$와 $30^{\circ}C$ 처리구가 $20^{\circ}C$ 처리구보다 높았고, 쌈추의 경우도 온도가 높았던 처리구에서 초장, 엽면적, 생체중 및 건물중이 유의적으로 높았다. 식물체 잎의 총 페놀 함량은 비트의 경우, $20^{\circ}C$와 $25^{\circ}C$ 처리구가 각각 42.4와 $46.9mg{\cdot}g^{-1}DW$로 $30^{\circ}C$ 처리구의 $22.4mg{\cdot}g^{-1}DW$보다 2배이상 높았고, 쌈추의 경우도 $20^{\circ}C$ 처리구가 $79.2mg{\cdot}g^{-1}DW$로 가장 높았고, $30^{\circ}C$ 처리구가 $53.7mg{\cdot}g^{-1}DW$로 가장 낮아 두 작물 모두 온도가 낮았던 $20^{\circ}C$ 처리구가 높은 경향을 보였다. 또한 식물체 잎의 총 플라보노이드 함량은 두 작물 모두 총 페놀 함량과 비슷한 경향으로 온도가 낮은 $20^{\circ}C$ 처리구에서 높은 것으로 나타났다. 따라서 인공광 이용형 식물공장에서 생육과 기능성 물질 함량은 반비례 관계를 나타내고 있어 기능성 물질 함량이 높은 비트와 쌈추를 생산하고자 할 때에는 생육 온도를 $20^{\circ}C$ 정도로 관리하는 것이 적절할 것으로 판단된다. 그러나 향후 생육 단계에 따른 변온관리 방법, LED와 형광등 병용이용 시스템 적용 등으로 수량성에 대한 추가적인 검토가 필요할 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.