• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.9-18
• /
• 2013

Two-phase vapor-liquid flows exist in many shell and tube heat exchangers such as condensers, evaporators, and nuclear steam generators. To understand the fluid dynamic forces acting on a structure subjected to a two-phase flow, it is essential to obtain detailed information about the characteristics of a two-phase flow. The characteristics of a two-phase flow and the flow parameters were introduced, and then, an experiment was performed to evaluate the pressure loss in the tube bundles and the fluid-dynamic force acting on the cylinder owing to the pressure distribution. A two-phase flow was pre-mixed at the entrance of the test section, and the experiments were undertaken using a normal triangular array of cylinders subjected to a two-phase cross-flow. The pressure loss along the flow direction in the tube bundles was measured to calculate the two-phase friction multiplier, and the multiplier was compared with the analytical value. Furthermore, the circular distributions of the pressure on the cylinders were measured. Based on the distribution and the fundamental theory of two-phase flow, the effects of the void fraction and mass flux per unit area on the pressure coefficient and the drag coefficient were evaluated. The drag coefficient was calculated by integrating the measured pressure on the tube by a numerical method. It was found that for low mass fluxes, the measured two-phase friction multipliers agree well with the analytical results, and good agreement for the effect of the void fraction on the drag coefficients, as calculated by the measured pressure distributions, is shown qualitatively, as compared to the existing experimental results.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.244-249
• /
• 2007

Deadweight piston gauge have been widely used as a fundamental instrument of precise pressure measurement because they are robust, accurate, potable, convenient to use and are able to realize the definition of pressure as farce per unit area. Basically, a deadweight piston gauge consists of a piston mounted vertically in a close-fitting cylinder filled with a gas and weights of known mass values. The pressure to be measured is applied to the base of the piston generating an upward vertical force, and is balanced by the downward gravitational force generated by weights. These instruments can be used to measure pressures above 10 kPa because of tare weights including piston. However, using a variable bell-jar pressure method and a newly developed weight loading device we can extend the application range of deadweight piston gauge to lower pressures. In this paper, we present the practical calibration results for two CDGs(Capacitance diaphragm gauge, MKS) with full-scale ranges of 1.33 kPa and 13.3 kPa, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3420-3429
• /
• 1974

This study was performed to estimate the daily water consumption for watering livestock and home use, and to organize the water systems in the rural districts of Korea. For these purposes, 560 farms and other 40 urban families were randomly chosen and investigated about their water systems and daily water consumption seasonally from July 20 to August 31, 1973, and other 82 livestock raisers' useful data for watering livestock helped the study to assess the consumption of livestock water and compare it to that of general farms which bred some domestic animals as their sidelines. The results of data showed that the daily consumption of water was varied with the difference of districts and seasons in which the investigations were conducted. The results were summarized as follows. 1. The mean consumption of water for home use was varied with the range of 30.2-48.7 lit./day in summer and 22.4-45.2 lit./day per a person, respectively, in the rural districts, which showed that the water consumption in summer was more than in autumn. 2. The mean consumption of livestock water in the general farms approached to about 15.8-37.1 lit./day per cattle, 3.87-16.45 lit./day per a pig, and 0.19-1.03 lit./day per chicken, but it was slightly reduced in autumn; 10.89-37.09 lit./day per cattle, 3.87-12.63 lit./day per a pig, and 0.06-0.94 lit./day per chicken. The ratio of livestock water consumption to home use amounted to the range of 10-25%. 3. The mean consumption of livestock water used at the livestock raisers amounted to 134 lit./day per dairy cow, 67.4 lit./day per cattle, 43.29 lit./day per a horse, 13.24 lit./day per a pig, 0.438 lit./day per a layer, and 0.177 lit./day per a broiler, which showed that the daily water consumption for larger livestock was about two times as much as the farms, but it was approximately of the same for small ones. 4. The factors affecting the amount of water consumption for home use were statistically analyzed to find the kind of water sources and the class of water systems by the factorial arrangement method to the fundamental experimental unit, Suwon area of 100 of families, in which the former was very significant while the latter was significant. However, the standard of living and their interactions were not significant. 5. Almost 83.24% of the sampled farms used some kinds of wells as their water sources, of which 32.06% was of hard water, and of which 11.l% or 2.6% contained much of iron or organice materials, respectively, examining them by a simple technique of sensibility, 6. The resulting chart of the farm water systems was summarized as Fig. IV-6. Observating the safe distance from contamination sources, the ratio of 42.4% of sampled farms whose water sources were wells, confronted highly to the danger of contamination to their water sources. And other dangerous sources of contamination such as toilets, stalls, and compost heaps were situated nearly to the water sources, and most of them were able to make their spoiled water infiltrated into the ground. Thereafter, it was recommended to develop some protecting methods and to install some suitable faculties to clean water.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.209-217
• /
• 1984

This study was conducted to establish fundamental of rice cultivation system in the southern warm region of Korea by investigation of variation of yield component factor and yield under the different transplanting dates which was at interval of 15 days, from May 20 to July 5. In the variation of leaf age, the leaf of July 5 transplanting was less 1.1 leaves than that of May 20 transplanting in Seokwang. However in Dongjin, the leaf of May 20 transplanting was more 1.7 leaves than that of July 5. According to transplanting date delay, the shorten ratio of flag leaf was showed an increasing tendency. Period from transplanting to heading under the different transplanting in Seokwang, required about 75 days in May 20 transplanting and 68 days in June 5, 67 days in June 20, but 71 days in July 5, it was a cause of decrease in grain yield, because of increase in the period from transplanting to heading date. The maximum yield under the different transplanting gathered on May 20 transplanting in Seokwang variety, and on June 20 transplanting in Dongjin variety, and then, on the accumulated temperature 1017$\pm$24$^{\circ}C$ in Seokwang, 952$\pm$15$^{\circ}C$ in Dongjin, from 10 days before heading to 30 days after heading, it was appeared the high yield. It was showed linearly negative correlation between the No. of panicles per unit area and transplanting date (Seokwang; r=-0.6768$^{**}$, Dongjin: r=-0.5182$^{**}$). There were more differentiation of spikelets per panicle in the late transplanting in Seokwang, however in Dongjin, it was decreased in differentiation of spikelets per panicle in the early and the late transplanting.ing.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.333-344
• /
• 2011

The recent expansion in the number of housing construction projects has been accompanied by substantial improvements in construction quality, which can be attributed to the development of new construction technologies and materials. In apartment complex construction projects, numerous mechanization technologies have been adopted as part of the floor plastering process to counter increasing difficulties in securing labor and the pressing need to reduce lead time, but these have also triggered setbacks such as additional costs or loss of time to fix cracks in or loosening of floor. Cracks developing in the floor of an apartment housing unit, in terms of materials in use, are the products of a complex combination of material makeup, construction workmanship, concrete curing and the protection method. Controlling such elements from the perspective of materials in use may ensure partial success in reducing cracks, but fall short of eliminating them completely. Any attempt to prevent cracks from developing in the first place requires systematic analysis as to their potential causes and viable solutions to reduce them. On this backdrop, this paper aims to provide an analysis of potential causes of cracks found in floor plastering, and consider the mechanism of a crack stop-bar as a fundamental safeguard against them.

• Information Systems Review
• /
• v.13 no.2
• /
• pp.55-72
• /
• 2011

As the complexity of business environment increases rapidly the use advanced information technology start to affect not only the business processes of individual companies but also the fundamental nature of business and industrial ecosystem. The changes observed at the level of business and industrial ecosystem encompasses a broad range of transformation. This unit of analysis is not sufficiently dealt with by existing information systems research. This research attempted to analyze the changes in business ecosystem caused by digital transformation using a relatively new approach called ecosystem mapping. We developed and suggested an ecosystem mapping methodology step by step and applied the methodology to film industry. The film industry is chosen because it is an industry very sensitive to the changes in technology and has gone through massive transformation during the last three decade by way of using modem information technology.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.143-148
• /
• 2016

The aim of research is inducing the optimum proportion of fly ash(FA) and blast furnace slag(BS) for ternary cement. In this research, hence, the fundamental properties of mortar mixtures were evaluated depending on various proportion of FA and BS. The results of the experiment, within the scope of the study, obtained the following conclusions. Flow of the mixtures was increased with addition of binary supplementary cementitious material(SCM), and especially, portion of FA. The air content of the mixtures was increased with addition of binary SCMs, while it was decreased with increased FA content. In the case of unit mass, increased value was obtained due to the increased air content within 25 to 45% of binary SCM content, while it was increased within 65 to 100% of binary SCM up to only 20% of FA content and decreased more than 20% of FA because of the low density of FA. The setting time of the mixtures was delayed with addition of binary SCM and FA. In the case of compressive strength, at 91-day age, the highest value was obtained with 25 and 45% of binary SCM with the proportion of FA to BS of 40 to 60. Therefore, based on the compressive strength, it is considered that the binary SCM content of 25 and 45% with the proportion of FA to BS of 2 : 3 is the most favorable conditions in this research scope.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.513-522
• /
• 2008

Service-Oriented Architecture(SOA) is an method to develop applications by developing and publishing reusable services which potentially be used in various applications, and discovering and composing right services dynamically. SOA adopts a paradigm of publish-discover-invoke, which is considerably different from object-oriented and component-based development(CBD) approaches. The service in SOA is different from function in procedural programming, object in object-oriented programming, and component in CBD, and its fundamental requirement is a high level of reusability and applicability. In SOA, service providers and service consumers are loosely coupled since the providers try to develop reusable services and the consumers try to locate right services without knowing much about the providers and their published services. Moreover, the process of searching, choosing and invoking right services is not presented in conventional programming paradigms. Therefore, conventional approaches to developing user interfaces and invoking the functionality on servers through JSP, and RMI in object-oriented programming cannot well be applicable to designing clients’ programs in SOA. Therefore, there is a high demand for a practical and systematic process for developing clients’ applications, and the such a process should be devised by considering key characteristics of services and SOA. However, little work on this area is known to date, and there has not a process for client side just except few guide lines for developing service client. In this paper, we propose a practical and systematic development process for developing clients' applications in SOA. Then, we define instructions for carrying out each activity in the process. To show the applicability of the proposed work, we show the result of applying our process in developing a services application for searching and booking hotels.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.2
• /
• pp.111-120
• /
• 2011

High-rise buildings have recently increased over the residential, commercial and office facilities, thus an understanding of construction cost for high-rise building projects has been a fundamental issue due to enormous construction cost as well as unpredictable market conditions and fluctuations in the rate of inflation by long-term construction periods of high-rise projects. Especially, recent violent fluctuations of construction material prices add to problems in construction cost forecasting. This research, therefore, develops a time-series model with the Box-Jenkins methodologies and material prices time-series data in Korea in order to forecast future trends of unit prices of required materials. BIM (Building Information Modeling) approaches are also used to analyze injection time of construction resources and to conduct quantity takeoff so that total material price can be forecasted. Comparative analysis of Predictability of tentative ARIMA (Autoregressive Integrated Moving Average) models was conducted to determine optimal time-series model for forecasting future price trends. Proposed BIM based time series forecasting model can help to deal with sudden changes in economic conditions by estimating future material prices.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.145-156
• /
• 2020

The purpose of this study is to analyze the science history materials presented in middle school 'Science' textbook according to the 2015 revised curriculum. The subjects of this study were 14 middle school 'Science' textbooks. The analysis used the three-dimensional framework. The results of analysis show that the number of science history materials presented in textbooks tends to increase as the grade goes up. It was also found that science history materials were presented in a specific unit for each grade. The three-dimensional analysis of science history materials showed that conceptual-fundamental-discovery/device types were most commonly presented in all grades. At the instruction context level, the conceptual context was the most common, and the basic role was the main at the role level. The discovery/device type was the most common type of presentation. The results of the study show that the science history materials presented in science textbooks were concentrated in some areas. Also, the instruction context and role were concentrated in some factors in terms. This suggests that various science history materials need to be developed in the future. It is also necessary to explore concrete methods to ensure that science history materials presented in textbooks can be used in various roles in different contexts.