• 제목/요약/키워드: fundamental unit

검색결과 434건 처리시간 0.024초

감압 하에서 전해 망간 용탕의 증발거동에 관한 연구 (Study on the Evaporation Behaviour of Electrolytic Manganese Melt Under Reduced Pressure)

  • 홍성훈;전병혁;위창현;신동엽;유병돈;서성모;박종민
    • 대한금속재료학회지
    • /
    • 제47권12호
    • /
    • pp.828-833
    • /
    • 2009
  • As a fundamental study in the development of a distillation process for ferromanganese alloy melts, the evaporation behavior of an electrolytic manganese melt under reduced pressure was investigated. The melt temperature, vacuum degree, surface area of the melt, and reaction time were considered as experimental variables. The amount of vaporized manganese increases linearly as the reaction time increases, and the evaporation of manganese was promoted by increasing the temperature and surface area of the melt. In the pressure range below the equilibrium vapor pressure of manganese, the amount of vaporized manganese per unit surface area of the melt increased sharply with a decrease of the pressure in the reaction chamber. An empirical equation for the evaporation rate of manganese was derived by regression analysis. The evaporation coefficient of manganese was determined to be approximately $3.84{\times}10^{-3}(g{\cdot}K^{1/2})/(Pa{\cdot}cm^2{\cdot}min)$ under the investigated conditions.

지역거점 공공병원의 인공신장부 공간구성에 관한 연구(1) (A Study on the Space Composition for Department of Kidney Dialysis in Regional Public Hospital(1))

  • 채철균;박경현
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제28권2호
    • /
    • pp.31-38
    • /
    • 2022
  • Purpose: This study presents the results of the analysis on space utilization of kidney dialysis units in regional public hospitals, which plays a key role in local public medical services. The result aims to achieve safety from infection, allow comfort for the dialysis environment, and stability for medical support. The purpose of this study is to present fundamental data for architectural plans for the kidney dialysis unit, as well as to alleviate potential infectious diseases such as COVID-19. Methods: For research purposes, the investigation and analysis of space utilization were based on architectural floor plans, research papers and literature, related legal systems, and public statistics. Of the main 35 regional public hospitals, in regards to data accessibility, 15 facilities were selected to conduct the survey and analysis for the objective. Results: The space composition by area research results of kidney dialysis units in public hospitals are as follows: Firstly, most targets do not have required rooms in the access and support area, except for the hemodialysis beds in the treatment section. Secondly, the access area requires necessary room and space design that took into consideration of convenience and accessibility for patients. Thirdly, in regards to infection prevention and control, proper circulation and room plan is essential for storage and disposal of contaminated products and linen after use. For the treatment area, the arrangement plan needs to establish a visual connection between the isolation room, the nursing station, and the bed area. Additionally, consideration of circulation in the preparation, treatment, observation, examination, and all other rooms in the facility is required. Lastly, for the support area, the room is designed to consider adequate working and meeting spaces for the medical staff, consultation space for patients or guardians, separate storage and disposal of clean and contaminated items, and the storage of various equipment for dialysis. Implications: In preparation for the increase in chronic kidney failure patients and the spread of infectious diseases, such as COVID-19, the researched data demonstrates the basic guidelines for space composition of kidney dialysis units and the significant role of regional public hospitals.

Market sentiment and its effect on real estate return: evidence from China Shenzhen

  • LI, ZHUO
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권9호
    • /
    • pp.243-251
    • /
    • 2022
  • 부동산 산업은 경제와 높은 상관관계를 갖는 기초산업이다. 과거 20년 동안 중국경제성장을 가속화하면서 부동산 산업도 큰 변화를 보이고 있다. 이에 본 연구는 기존 경제성장지표인 GDP, 소득, 부동산 가격 및 금리 등 거시경제요인이 주택시장 가격상승을 종합적으로 설명하지 못한 점을 감안하여 행동경제학에서 심리지수가 주택시장에 미치는 영향을 분석한다. 방법론적으로 주성분분석법(PCA)을 활용하여 중국심천지역을 중심으로 부동산시장 수요자 심리지수 및 공급자 심리지수를 각각 도출하고 벡터자기회귀(VAR)모형을 통해 심리지수가 주택수익률에 대한 영향을 실증분석으로 진행한다. 그 결과 공급자의 심리는 주택시장에 긍정적인 영향을 미친 반면, 수요자의 심리는 부정적인 영향을 미치고 있다. 또한 공급자의 심리가 높은 경우에는 수요자의 심리가 높은 경우와 다른 영향을 미치고 있은 것을 밝혔다.

Environmental test campaign of a 6U CubeSat Test Platform equipped with an ambipolar plasma thruster

  • Stesina, Fabrizio;Corpino, Sabrina;Borras, Eduard Bosch;Amo, Jose Gonzalez Del;Pavarin, Daniele;Bellomo, Nicolas;Trezzolani, Fabio
    • Advances in aircraft and spacecraft science
    • /
    • 제9권3호
    • /
    • pp.195-215
    • /
    • 2022
  • The increasing interest in CubeSat platforms ant their capability of enlarging the frontier of possible missions impose technology improvements. Miniaturized electrical propulsion (EP) systems enable new mission for multi-unit CubeSats (6U+). While electric propulsion systems have achieved important level of knowledge at equipment level, the investigation of the mutual impact between EP system and CubeSat technology at system level can provide a decisive improvement for both the technologies. The interaction between CubeSat and EP system should be assessed in terms of electromagnetic emissions (both radiated and conducted), thermal gradients, high electrical power management, surface chemical deposition, and quick and reliable data exchanges. This paper shows how a versatile CubeSat Test Platform (CTP), together with standardized procedures and specialized facilities enable the acquisition fundamental and unprecedented information. Measurements can be taken both by specific ground support equipment placed inside the vacuum facility and by dedicated sensors and subsystems installed on the CTP, providing a completely new set of data never obtained before. CTP is constituted of a 6U primary structure hosting the EP system, representative CubeSat avionics and batteries. For the first test campaign, CTP hosts the ambipolar plasma propulsion system, called Regulus and developed by T4I. After the integration and the functional test in laboratory environment, CTP + Regulus performed a Test campaign in relevant environment in the vacuum chamber at CISAS, University of Padua. This paper is focused on the test campaign description and the main results achieved at different power levels for different duration of the firings.

몰리브덴광의 광물학적 특성 및 부선 기초연구 (Mineralogical Characteristics and Fundamental Study of Flotation for Molybdenum Ore)

  • 푸레브 오윤빌렉;김현수;박철현
    • 자원리싸이클링
    • /
    • 제31권6호
    • /
    • pp.73-80
    • /
    • 2022
  • 본 연구에서는 국내 부존 몰리브덴광을 대상으로 광물학적 특성 및 부유선별 기초특성을 파악하였다. 몰리브덴의 근원광물은 휘수연석으로 확인되었으며 원광 내 주요 맥석광물은 규산염광물이었다. 구리, 납 및 아연 등은 극미량으로 나타났다. 부유선별 기초특성 결과, 휘수연석의 제타전위는 pH 전영역에서 음전하를 나타내었다. 휘수연석의 접촉각은 pH의 증가에 따라 증가하였고 최대값은 pH 9에서 74°을 나타내었다. 단위부선의 최적조건에서 정광의 품위와 회수율은 각각 MoS2 82.4%와 92.04%를 나타내었다. 정광내 불순물 조사결과, 정광의 품위를 저하시킬 수 있는 휘수연석과 유사한 특성을 보이는 황화광물, 그리고 휘수연석과 결합된 규산염광물이 관찰되었다. 따라서, 정광의 품위향상을 위해 재분쇄/단체분리 향상을 통한 규산염광물의 제어와 미립자광물 선별 효율을 높일 수 있는 컬럼부선등이 요구된다.

PERISTALTIC PUMPING OF AN ELLIS FLUID IN AN INCLINED ASYMMETRIC CHANNEL

  • A. SMALL;P. NAGARANI;M. NARAHARI
    • Journal of applied mathematics & informatics
    • /
    • 제41권1호
    • /
    • pp.51-70
    • /
    • 2023
  • The flow of an incompressible Ellis fluid in an inclined asymmetric channel, driven by peristaltic waves was studied under low Reynolds number and long wavelength assumptions. The wave on each side of the channel are assumed to be an infinite train of sinusoidal waves, both having the same constant wave speed and wavelength however, they vary in wave amplitude, channel half width and phase angle. We derived expressions for the axial and transverse velocities, volume flow rate, pressure rise per unit wavelength and streamlines. The effects of varying the wave amplitudes, the phase angle, the channel width, the angle of inclination of the channel as well as the fluid parameters on the flow were analyzed. Trapping conditions were determined and the presence of reflux highlighted using the streamlines for the necessary channel and fluid conditions. By varying the fluid parameters, changes in the fluid that deviated from the Newtonian case resulted in a reduction in the axial velocity in the neighborhood of the center of the channel and a simultaneous increase in the velocity at the periphery of the channel. A nonlinear relation was observed with the pressure rise and the volume flow rate. This nonlinear relation is more pronounced with an increase in the absolute value of the volume flow rate. For Newtonian fluids a linear relation exists between these two variables. The fluid parameters had little effects on the streamlines. However, variations of the wave amplitudes, volume flow, channel width and phase angle had greater effects on the streamlines and hence the trapped region.

대학도서관 교수·학습지원 서비스에 대한 사서 인식분석 (Analysis of Librarians' Perception of Teaching and Learning Support Services of Academic Libraries)

  • 최예진;나민경;이지연
    • 한국문헌정보학회지
    • /
    • 제57권2호
    • /
    • pp.51-77
    • /
    • 2023
  • 본 연구는 대학구성원의 교수·학습 활동을 위해 대학도서관에서 지원해야 하는 서비스의 방향성을 모색하기 위하여 교수학습센터와 대학도서관에서 제공하고 있는 교수·학습 관련 활동 현황을 파악하고, 대학도서관 사서를 대상으로 인터뷰를 통해 교수·학습 지원활동에 대한 인식을 분석하였다. 질적 데이터의 내용분석 결과, 도서관 서비스 영역에서는 교수·학습지원, 서비스 제공방식, 관계 강화와 관련된 실무자들의 인식을 파악할 수 있었으며, 도서관 역할 인식 영역에서는 도서관 역할에 대한 타 부서 인식, 도서관 역할 정립, 도서관 투자 확대로 나누어 이에 대한 실무자들의 인식을 파악할 수 있었다. 이에 본 연구에서는 대학도서관의 교수·학습지원 서비스의 방향성으로 '전공 및 학과 전담 서비스에 대한 홍보 강화', '교육자로서 사서의 역량 강화', '디지털 정보자원에 대한 리터러시 강화', '기초소양 함양 프로그램의 개발 및 운영에 있어 도서관의 역할 강화', '휴먼라이브러리의 운영', '도서관 공간의 다양한 활용 모색' 등을 제시하였다.

Effect of perforation patterns on the fundamental natural frequency of microsatellite structure

  • Ahmad M. Baiomy;M. Kassab;B.M. El-Sehily;R.M. El-Kady
    • Advances in aircraft and spacecraft science
    • /
    • 제10권3호
    • /
    • pp.223-243
    • /
    • 2023
  • There is a burgeoning demand for minimizing the mass of satellites because of its direct impact on reducing launch-to-orbit cost. This must be done without compromising the structure's efficiency. The present paper introduces a relatively low-cost and easily implementable approach for optimizing structural mass to a maximum natural frequency. The natural frequencies of the satellite are of utmost pertinence to the application requirements, as the sensitive electronic instrumentation and onboard computers should not be affected by the vibrations of the satellite structure. This methodology is applied to a realistic model of Al-Azhar University micro-satellite in partnership with the Egyptian Space Agency. The procedure used in structural design can be summarized in two steps. The first step is to select the most favorable primary structural configuration among several different candidate variants. The nominated variant is selected as the one scoring maximum relative dynamic stiffness. The second step is to use perforation patterns reduce the overall mass of structural elements in the selected variant without changing the weight. The results of the presented procedure demonstrate that the mass reduction percentage was found to be 39% when compared to the unperforated configuration that had the same plate thickness. The findings of this study challenge the commonly accepted notion that isogrid perforations are the most effective means of achieving the goal of reducing mass while maintaining stiffness. Rather, the study highlights the potential benefits of exploring a wider range of perforation unit cells during the design process. The study revealed that rectangular perforation patterns had the lowest efficiency in terms of modal stiffness, while triangular patterns resulted in the highest efficiency. These results suggest that there may be significant gains to be made by considering a broader range of perforation shapes and configurations in the design of lightweight structures.

배합 및 재료요인에 따른 저수축 고성능 콘크리트의 품질 특성 (Property of tow Shrinkage High Performance Concrete depending on Mixture Proportions and Material Characteristics)

  • 한천구;김성욱;고경택;한민철
    • 콘크리트학회논문집
    • /
    • 제16권6호
    • /
    • pp.805-811
    • /
    • 2004
  • 본 연구는 배합 및 재료요인에 따른 저수축 고성능 콘크리트의 기초적 특성 및 건조 자기수축 등 품질 특성에 대하여 검토한 것이다. 실험결과 고성능 콘크리트의 기초적 물성으로 배합요인에 따른 유동성은 W/B 및 단위수량이 작을수록 크게 감소하였고, 공기량은 W/B 변화에 따라 큰 차이가 없었으나, 단위수량 증가에 따라서는 증가하였다. 또한, 압축강도는 W/B가 클수록 크게 나타났고, 단위수량 변화에 따라서는 큰 차이가 없는 것으로 나타났다. 재료요인에 따른 유동성은 시멘트의 경우 LPC가 OPC보다 작게 나타났고 SP제는 PS, NS, MS의 순으로 크게 나타났으며, 공기량은 OPC가 LPC보다 많게 나타났고, SP제는 MS PS NS의 순으로 크게 나타났다. 또한, 압축강도는 LPC가 OPC보다 초기재령에서는 작게 나타났지만, 91일 이후에는 유사하게 나타났고, SP제 종류에 따라서는 큰 차이가 없는 것으로 나타났다. 건조 및 자기수축은 배합요인에서 W/B가 클수록 단위수량이 작을수록 작게 나타났다. 단, W/B $35\%$ 및 단위수량 $145 kg/m^3$에서는 재령 49일까지 자기수축이 발생하지 않았는데, 이는 팽창재와 수축저감제의 중첩효과에 의해 자기수축이 상쇄된 것으로 분석된다. 재료요인에서 시멘트는 LPC가 OPC보다 작게 나타났고 SP제의 종류는 큰 차이가 없는 것으로 나타났다. 따라서, FA, SF, EA, SR를 혼입한 저수축 고성능 콘크리트에서 W/B는 가능한 범위내에서 크게, 단위수량은 적게 되도록 배합설계 하곤 시멘트는 IPC, SP제는 MS를 사용할 때 수축특성이 우수해짐을 알 수 있었다.

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF