• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.580-585
• /
• 2019

In this study, we synthesized amine-functionalized magnesium-phyllosilicates (AF-MgP) with an octahedral and tetrahedral structure using (3-aminopropyl)triethoxysilane. The synthesis of AF-MgP, surface functionalization of amine and 1 : 2 ratio of the octahedral and tetrahedral structure were confirmed by FT-IR and XRD analysis. In addition, it was confirmed that AF-MgP was absorbed evenly on the surface of cotton fibers and coated on the cotton fibers from HR-SEM and EDX analysis. The antimicrobial activity test of cotton fibers according to KS confirmed that cotton fibers coated with AF-MgP particles show an enhanced antimicrobial activity against cutaneous microorganisms. Our results suggest that AF-MgP is not only applied as a functional nanomaterial that gives the cotton fiber antimicrobiality, but also can be used in the field of cosmetic and biomedical materials.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.106-122
• /
• 2021

This study confirmed the mechanical properties of an auxetic re-entrant pattern prepared using 3D printing technology and its composite fabric with neoprene for the production of functional auxetic patterns/textiles for safety shoes. Samples were prepared by the tilt angle of a re-entrant pattern of 0°, 30°, 45°, 60° and 90°, and then analyzed using Poisson's ratio, bending, compression, and tensile properties. A 3D printed auxetic re-entrant pattern (3DP-RE) and its composite fabric (3DP-RE/NP) showed a negative Poisson's ratio in all tilting angles that indicated auxetic properties. The results of the bending property shown that strength of 3DP-RE/NP was 1.5 times lower than NP, but the strain improved 2.0 times. It was confirmed that the deformation of 3DP-RE/NP is possible with a low load. Each sample type of compression behavior indicated similar regardless of the tilting angles; in addition, the compression toughness of 3DP-RE/NP increased 1.2 times compared with NP. In the case of tensile properties, 3DP-RE and 3DP-RE/NP were affected by the tilting angle, samples with 90° (the opposite of load direction) showed best tensile property and toughness. 3DP-RE/NP indicated improved bending, compression, and tensile properties.

• Composites Research
• /
• v.34 no.3
• /
• pp.148-154
• /
• 2021

Carbon/epoxy composite bipolar plate (BP) is a BP that is likely to replace existing graphite bipolar plate of vanadium redox flow cell (VRFB) due to its high mechanical properties and productivity. Multi-functional carbon/epoxy composite BP requires graphite coating or additional surface treatment to reduce interfacial contact resistance (ICR). However, the expanded graphite coating has the disadvantage of having low durability under VRFB operating conditions, and the surface treatments incur additional costs. In this work, an excessive resin absorption method is developed, which uniformly removes the resin rich area on the surface of the BP to expose carbon fibers by applying polyester fabric. This method not only reduces ICR by exposing carbon fibers to BP surfaces, but also forms a unique ditch pattern that can effectively hold carbon felt electrodes in place. The acidic environmental durability, mechanical properties, and gas permeability of the developed carbon/epoxy composite BP are experimentally verified.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.178-183
• /
• 2022

For enhancing the flame-retardant properties of wallpapers, we developed an organic-inorganic hybrid solution with ZrSiO₄ as a functional ceramic powder, coated on non-woven fabric using dip coating, spray coating, and slot-die coating methods. Their flame retardant properties were characterized by a 45° combustion tester, which is manufactured according to the flame-retardant performance standard (KOFEIS 1001 and KS F 2819). In organic-inorganic hybrid solution, with increasing the concentration of acid-catalyst (acetic acid), the precipitation of ZrSiO₄ powders increased, and the flame retardant properties decreased. The highest flame retardant result was obtained for the solution adding 5 wt% acetic acid. The optimization of the coating method and coating number resulted in the most excellent flame-retardant properties being obtained for the non-woven fabric coated for 5 or 7 times by dip coating method, and their flame-retardant properties corresponded to class 2 flame-retardant performance of wallpapers.

• Textile Coloration and Finishing
• /
• v.35 no.1
• /
• pp.8-19
• /
• 2023

Silicone rubber is widely used in most industries due to diverse advantages like heat stability, UV stability, durability, chemical resistance, environment friendliness, inertness and so on. But there is limitation to expand applications due to relatively weak rubber strengths such as tensile strength and tear strength, especially in fabric coating applications. The purpose of this study is to find influence of coating agent on performances of rubber and coated fabrics and their correlation according to different crosslinking densities of silicone rubbers. Addition cure type of silicones were formulated using crosslinked MQ-type silicone resin consisting of M (R₃SiO_1/2) and Q (SiO_4/2) and linear polymers. Raw materials used were; 1) linear vinyl endblocked polymers and vinyl functional MQ resin as main polymers, 2) linear silicone hydride polymers as crosslinkers, 3) platinum catalyst and 4) inhibitor to control curing speed. Rubber specimens were prepared to check mechanical strength using universal testing machine (UTM). Crosslinking density was calculated using Flory-Rhener equation using solvent swelling method. Differential scanning calorimetry (DSC) and scanning electron microscope (SEM-EDS) were used to characterize rubbers. Consequently, it was found that physical properties of silicone rubbers and coated fabrics can be expected by crosslinking density of rubbers. Silicone rubber formulations that contain 20 ~ 30 wt% of vinyl MQ resin showed strongest balanced performances.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1672-1681
• /
• 2007

Cationization is effective to complement the defects of Tencel blended fabrics by introducing new functions. For this purpose, we used chitosan, which is congenial to the human body, free of pollution, and easily reacted. Then, we compared it to the Tencel single fabrics. To perform such effective cationization, the fabrics were treated with chitosan after NaOH pretreatment and enzyme treatment thereof. After that, the fabrics were treated with a crosslinking agent and a softner. The dyeing property of the cationized Tencel blended fabrics and reactive dye, which is a type of anionic dye, show a high concentration in neutral salt and excellent repulsive power between the fabrics and the decreased dyes. The dyeing property of the chitosan treated fabrics represented better performances than that of untreated fabric in the lower concentration of neutral salt. Meanwhile, when it was dyed with certain acid dyes, the dyeing property of the chitosan treated fabrics showed better results due to the reaction of an amine group, which was introduced by chitosan treatment. Thus, the verification of the cationization of the Tencel blended fabrics was performed. The washing fastness of the Tencel blended fabrics showed a little bit better than that of the Tencel single fabric, and it represented a better performance in the dye with a reactive dye than that of an acid dye.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.25-40
• /
• 2008

The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.83-94
• /
• 2016

The aim of this study was to investigate effective expression method of performance information of functional clothing and preferred alternatives for the categorized consumer groups according to the perception about the functional outdoor jacket. 472 males and females in their 20s-60s' were surveyed and their answers were analysed and categorized by using SPSS 21.0 statistical program. For the study, four different expression methods for waterproof & breathable fabric, 'illustration only', 'illustration+Korean text', 'illustration+foreign text', and 'chart with Korean text', were presented and asked for finding correct answers. The analysis was done for three categorized consumer groups from the former study, 'unconversant/brand & design pursuing group', 'conversant/function pursuing group' and 'high price/high function preferring group'. The results showed that regardless of groups, 'picture only' was the most preferred method and 'graph' was the least. However, the percentage of correct answers for the 'graph' was the biggest, especially for 'conversant/function pursuing group'. It implied that the effective expression method should be differentiated depending on the target consumer groups. 'Conversant/function pursuing group' more agreed on the need for additional information, such as 'after-washed performance', than other two groups.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.936-942
• /
• 2016

As the incidence of environmental diseases is increasing due to harmful environmental factors, there is a rising interest in developing eco-friendly materials for housing. In this study, we sought to develop antimicrobial interior fabric blind materials by employing ethanol extract of a medicinal plant Zanthoxylum piperitum DC. As determined by the disc diffusion method, the zones of inhibition of the pericarp ethanol extract at a concentration of 5 mg/disc against Klebsiella pneumoniae, Staphylococcus aureus, and Streptococcus mutans were 13.5±1.5 mm, 14.0±0.5 mm and 15.0±0.1 mm, respectively, whereas the leaf ethanol extract (5 mg/disc) against K. pneumoniae, S. aureus, and S. mutans were 12.8± 0.3 mm, 13.5±1.0 mm, and 12.0±0.1 mm, respectively. The IC₅₀ of the leaf ethanol extract against K. pneumoniae, S. aureus and S. mutans were about 0.5 mg/ml, 0.1 mg/ml and 1.0 mg/ml respectively. To examine whether the leaf ethanol extract possessing antibacterial activity of Z. piperitum DC can be applicable to production of antimicrobial fabric blind materials, the fabrics treated with either 1.0% or 2.0% of the leaf ethanol extract were tested for antibacterial activity against K. pneumoniae and S. aureus using International Standard Fabrics Test Method. The results indicate that the fabric treated with the ethanol extract of Z. piperitum DC possesses an excellent antimicrobial activity against both pathogenic bacteria. These results suggest that Z. piperitum DC may be applicable to producing functional fabrics which are effective in reducing the harmful bacterial factors in indoor environments.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.1
• /
• pp.161-174
• /
• 2012

This project purpose to develop a "custom patient gown" can satisfy with functional and aesthetic aspects for improving the problems of the existing children's patient gown that no unified image and discomfort in cooperation with the Public Design Development office as part of the citizen-friendly design improvement projects which one of the public politicizes of Seoul. The following are the results of design process for children's patient gown applying the universal design. First, the children's patient gown of the shape were classified into patient gown, rehabilitative gown and special gown and based on human-centered design to pursue the custom patient gown. Second, the color used pastel shades part of the Seoul colors and focused on emotions with color therapy theory. It was emphasized the aesthetic aspect by arranged the colors which harmonized with the main colors, also classified the wards and sizes. Third, for the functional materials of patient gowns was used the washable fabric and tender processing. Fourth, the accessories were matched the unified image and colors are suitable for the hospital environment such as bibs, aprons, and bedding. Fifth, Haechi, the symbol of Seoul was used as the logo. The Haechi logo and emotional message were applied to patient gowns to enhance the communication efficiency between patients and their guardians. As described above, the custom patient gowns for children's hospital will have significant ripple effects when they are expanded to national, public and private children's hospital. Such a qualitative change will pursue the respect and value of human by expanding the areas of public design for adults, the weak and the old-age society in future.