• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.23-37
• /
• 2017

Objectives : This study was conducted to evaluate the level of exposure to volatile organic compounds (VOCs) among workers handling rust preventive oils. Methods : A total of 30 bulk samples and 54 personal air samples were collected using diffusive samplers at 22 workplaces handling rust preventive oils in Daegu and Gyongsangbuk-do Province from March to October 2013. We also investigated detailed information on the related work conditions, such as kinds of products, handling methods, local exhaustive ventilation systems, and the status of the wearing personal protective equipment. All bulk samples and air samples were analyzed using gas chromatography mass spectrometry (GC-MS) to identify components to which workers potentially were exposed. Quantitative airborne concentrations of VOCs were confirmed using gas chromatography with flame ionized detectors. Results : In terms of qualitative analyses for the 30 bulk samples, we found carcinogenic, mutagenic and reproductive toxic(CMR) substances such as butane(carcinogenic Group 1A, mutagenic Group 1B), butoxy ethanol(carcinogenic Group 2), cumene (carcinogenic Group 2), ethyl benzene(carcinogenic Group 2), methyl isobutyl ketone(carcinogenic Group 2) and toluene (reproductive toxic, Group 2). As a result of full-shift based personal air samples, eight substances such as n-hexane, n-heptane, octane, nonane, decane, toluene, ethyl benzene and xylene were detected. Among them, n-hexane and n-heptane were detected in all of 54 air samples with $13.13mg/m^3$ and $8.61mg/m^3$ of maximum concentration, respectively. The level of airborne concentration from all of samples were bellow the occupational exposure limit in Korea. Conclusions : Based on the results of this study, workers handling rust preventive oils could be exposed to CMR substances contained in rust preventive oils and n-hexane and n-heptane were found as the most frequent sources of VOC exposure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.18-34
• /
• 2018

Objectives: This study aims to identify and solve problems in the consistency, procedural justification, effectiveness, and other matters concerning approaches to occupational safety and health legislation, administrative rules, and administrative guidelines. Methods: In this study of policy on the industrial safety and health law of Korea, problems were raised based on important information on the approach to occupational safety and health legislation and administrative guidelines such as notices, ordinances, and instructions, as well as on their interpretation and operation standards. Secondly, based on the identified problems in the occupational safety and health law policy, core practical methods to present improvement directions for occupational safety health policy in Korea were sought. Results: It is absolutely necessary to actively promote the infrastructure for occupational safety and health by developing and disseminating notices, guidelines, and manuals that act as contact points between laws and the field in various ways at the administrative institution level. In addition to sanctions, efforts to systematically guide and promote complex professional matters must be supported. Efforts should be made to strengthen administrative expertise so that administrative authorities can secure professional authority and fully enforce legal policies according to the purpose of legislation. In order to ensure the effectiveness of occupational safety and health law policies, it is necessary to shift the focus of the legal policy toward confirming and guiding substantial compliance with legal standards. Conclusions: As a result of the above efforts, when reliable occupational safety and health law policy is implemented, the understanding and acceptance of the legal policy for the administrative object will be increased, and the safety and health management of the enterprise will be maximized to its full extent.

• Molecules and Cells
• /
• v.26 no.4
• /
• pp.404-408
• /
• 2008

The genome of replication-competent BERV ${\gamma}4$ provirus, which is the most abundant ERV family in the bovine genome, was characterized in detail. The BERV ${\gamma}4$ genome showed that BERV ${\gamma}4$ harbors 8576 nucleotides and has the typical 5'-long terminal repeat (LTR)-gag-pro-pol-env-LTR-3' retroviral organization with a long leader region positioned before the gag open reading frame. Multiple sequences analysis showed that the nucleotide difference between 5' and 3' LTRs was 4.2% (mean value 0.042) in average, suggesting that the provirus formed at most 13.3 million years ago. Gag separated by a stop codon from pro-pol in the same reading frame, while env resides in another reading frame lacking of a functional surface domain. According to the current bovine genome sequence assembly, the full-length BERV ${\gamma}4$ provirus sequences were only found in the chromosomes 1, 2, 6, 10, 15, 23, 26, 28, X, and unassigned, although the partial sequences almost evenly distributed in the entire bovine genome. This is the first detailed study describing the genome structure of BERV ${\gamma}4$, the most abundant ERV family present in bovine genome. Combined with our recent reports on characterization of ERVs in bovine, this study will contribute to illuminate ERVs in the cattle of which no information was previously available.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.11
• /
• pp.925-933
• /
• 2014

Today, computational fluid dynamics (CFD) is widely used in industry because of the availability of high-performance computers. However, full-scale analysis poses problems owing to the limited resources and time. In this study, the performance and optimal size of a heat exchanger were calculated using the effectiveness-number of transfer units (${\varepsilon}-NTU$) method and a database of characteristics heat exchanger. Information about the geometry and performance of various heat exchangers is collected, and the performance of the heat exchanger is calculated under the given operating conditions. To determine the optimal size of the heat exchanger, a Genetic Algorithm (GA) is used, and MATLAB and REFPROP are used for the calculation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.547-552
• /
• 2007

SAFRS(spontaneous acoustic field reproduction system) is a system to sense changes of surroundings and produce sounds which can go well with environment elements sensed by the system in to the space. The sounds were judged by individual evaluation and, the classification of the preferred sounds according to the mood of the space was suggested in the former study. Effectiveness of SAFRS with field application was validated by prior studies which dealt with researching acoustic environment, evaluating images of sounds, and rating environment with existence and nonexistence of sound resources such as fountains and the system after applied in D university. In this study, for more effective field application of SAFRS, research for the acoustic environment around sound resources and subjective evaluation of the preference of the sounds from the resources were made and it was considered that the results of the experiments should be primary information to propose proper sound level to be offered by the system. The results of the study are as follows; 1) It was considered that the ambience of the center road was dependent upon produced sounds by the system and water sounds of the fountain and that of walk way was mostly dependent upon produced sounds. 2) The results of the subjective evaluation showed that the distance from sound resources was suggestive; the more distant from produced sounds the less full and clear the sounds, the less distant from the sounds of water the more delight and idyllic ambience, and the less distant from the forest the more idyllic ambient and diversity. 3) The results upwards were telling that an average value of six elements for the evaluation was even at the place set back 10.2m from center road and walk way. And harmony of all sounds of the place should be considered to propose suitable sound level of SAFRS.

• Journal of Internet Computing and Services
• /
• v.14 no.2
• /
• pp.73-85
• /
• 2013

As a way of augmenting constrained resources of mobile devices such as CPU and memory, many works on mobile cloud computing (MCC), where mobile devices utilize remote resources of cloud services or PCs, /have been proposed. A typical approach to resolving resource problems of mobile nodes in MCC is to offload functional components to other resource-rich nodes. However, most of the current woks do not consider a characteristic of dynamically changed MCC environment and propose offloading mechanisms in a conceptual level. In this paper, in order to ensure performance of highly complex mobile applications, we propose four different types of offloading mechanisms which can be applied to diverse situations of MCC. And, the proposed offloading mechanisms are practically designed so that they can be implemented with current technologies. Moreover, we define cost models to derive the most sutilable situation of applying each offloading mechanism and prove the performance enhancement through offloadings in a quantitative manner.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.300-307
• /
• 2003

This research investigated the consumption of various rice-based processed foods of 279 housewives in Daegu. 70% of the housewives that responded to the question graduated from a high school or college, was 30∼40 years old and full-time housewives. The main places for purchasing the rice-based processed foods were large size discount store and supermarkets, as other industrial products and the family′s preference was the most critical factors in choosing the products. The fact that the main reason of purchasing the rice breads and cookies, instead of wheat, was "They may be good for health” indicated many housewives have a positive perception of rice-based foods. Among the rice-based processed foods, the using frequency of rice cake (dduk) was the highest, with rice cookies and rice drinks being the next most frequent. However, the frequencies of cooked rice (bob) and rice flour were very low. An analysis of the correlation for the using frequency of 15 rice-based processed foods showed that the use of rice cookies and breads, instead of wheat, was highly correlated to another 13 foods. The critical reasons why they do not consume cooked rice and rice flour were uncertainty of the purity of the rice and the addition of preservatives, and that with rice bread and noodles there was no information available about the products, and hey have a poor taste. The most common reasons of using cooked rice were no time to cook and simple curiosity about the products. However, the consumers were suspicious of containers, which were a potential cause of environmental hormones, and the high price of the products. Packed rice flour was mainly used as an ingredient to give the viscosity to a product. The advantages of using rice flour were that it was available to control the amount of buying and the convenience to buy. However, it was pointed out that the taste of products containing packed rice flour were poorer than that of rice flour ground at a mill.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.6
• /
• pp.471-474
• /
• 2006

Objective : Neuroimaging data are of paramount importance in making correct diagnosis. We herein evaluate the clinical usefulness of image transfer using cellular phones to facilitate neurological diagnosis and decision-making. Methods : Selected images from CT, MRI scans, and plain films obtained from 50 neurosurgical patients were transferred by cellular phones. A cellular phone with a built-in 1,300,000-pixel digital camera was used to capture and send the images. A cellular phone with a 262,000 color thin-film transistor liquid crystal display was used to receive the images. Communication between both cellular phones was operated by the same wireless protocol and the same wireless internet service. We compared the concordance of diagnoses and treatment plans between a house staff who could review full-scale original films and a consultant who could only review transferred images. These finding were later analyzed by a third observer. Results : The mean time of complete transfer was $2{\sim}3\;minutes$. The quality of all images received was good enough to make precise diagnosis and to select treatment options. Transferred images were helpful in making correct diagnosis and decision making in 49/50 [98%] cases. Discordant result was caused in one patient by improper selection of images by the house staff. Conclusion : The cellular phone system was useful for image transfer and delivery patient's information, leading to earlier diagnosis and initiation of treatment. This usefulness was due to sufficient resolution of the built-in camera and the TFT-LCD, the user-friendly features of the devices, and their low cost.

• Journal of Science and Technology Studies
• /
• v.15 no.2
• /
• pp.1-31
• /
• 2015

World Wide Views on Climate and Energy held on 6 June 2015 was a structured citizens' deliberative consultation forum involving 10,000 citizens in 77 countries, and South Korea was one of the participating countries. Citizen participants, selected to reflect the demographic diversity in their countries or regions, were given information beforehand and deliberated for a full day with other citizens and voted on an identical set of questions, designed to reflect policy controversies at the UN COP negotiations to be held in Paris on December 2015. This study, firstly, analyzes the backgrounds and purposes of World Wide Views on Climate and Energy and reports the WWViews event held in Seoul, Korea before examining the theoretical implication of it. And then, this study discusses about the features and opportunities of World Wide Views on Climate and Energy as a way of forming a global deliberative governance by focusing on deliberative democracy, citizen participatory governance, and global citizenship.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2008

The objective of the KA-32 Helicopter Training Simulator Development Program, executed by the Republic of Korea Government, is to acquire a helicopter simulator which meets level C requirements in accordance with the FAA AC 120-63. The Korea Aerospace Research Institute (KARI) manages the development program and is supposed to develop and validate the flight dynamics model based on simulator design data and flight test data. The helicopter chosen for this project is the Kamov KA32T, operated by the Korean Forest Aviation Office. This paper presents the test program and information about the installation and execution of the flight tests. The program consist of tests for the simulator qualification, additional tests for model data and additional tests for model validation. The flight trials were performed from 30 July to 31 August at the Iksan airbase of the Forest Aviation Office (FAO).