• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.3-9
• /
• 2014

Two-way full-duplex relay network provides improved spectral efficiency by using either superposition coding or physical layer network coding at relays compared to conventional two-way half-duplex relay network. In this paper, we investigate the impact of residual loop interference on the performance of the two-way full-duplex relay network. Users and relays in the two-way full-duplex relay network estimate the residual loop interference in order to cancel it. However, it is difficult to perfectly cancel the residual loop interference from the received signal due to the estimation error. Numerical results show the impact of the estimation error on the outage probability of the two-way full-duplex relay network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1260-1266
• /
• 2007

Error propagation of source-relay (S-R) link limits the performance of decode-and-forward (DF) relay and prohibits DF relay from achieving full diversity gain. In order to solve this problem, the proposed deployment strategy focuses on two objectives. One is to achieve full diversity gain, and the other is to minimize the used power of the DF relay system. In order to achieve full diversity, the error probability of S-R link should be lower than that of maximal ratio combining (MRC) at destination without error propagation since the error probability of the weaker link dominates the total error probability. The proposed strategy of relay positioning points out the range of the relay position for achieving full diversity, and the used power of the relay is minimized by this range. Analysis of error probability and simulation results prove that the two objectives are achieved by the proposed strategy of the relay position.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.924-944
• /
• 2014

This paper investigates the power allocation and outage performance of MIMO full-duplex relaying (MFDR), based on orthogonal space-time block codes (OSTBC), in cognitive radio systems. OSTBC transmission is used as a simple means to achieve multi-antenna diversity gain. Cognitive MFDR systems not only have the advantage of increasing spectral efficiency through spectrum sharing, but they can also extend coverage through the use of relays. In cognitive MFDR systems, the primary user experiences interference from the secondary source and relay simultaneously, owing to full duplexing. It is therefore necessary to optimize the transmission powers at the secondary source and relay. In this paper, we propose an optimal power allocation (OPA) scheme based on minimizing the outage probability in cognitive MFDR systems. We also analyse the outage probability of the secondary user in noise-limited and interference-limited environments in Nakagami-m fading channels. Simulation results show that the proposed schemes achieve performance improvements in terms of reducing outage probability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.921-923
• /
• 2016

In this letter, massive MIMO and full-duplex communication are considered together for high efficiency next generation WLAN systems. The proposed scheme allocates different carrier sensing thresholds by applying the joint spatial division and reuse (JSDR) scheme and is able to enhance the efficiency of MU-MIMO protocols by reducing the protocol overhead. Finally, full-duplex communication is applied to improve the spectral efficiency of WLAN systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.760-770
• /
• 2013

Detecting grammatical errors from a text is a long-history application. In this paper, we compare the performance of two grammatical error detection techniques, which are implemented as a sub-module of an automated English scoring system. One is to use a full syntactic parser, which has not only grammatical rules but also extra-grammatical rules in order to detect syntactic errors while paring. The other one is to use a finite state machine which can identify an error covering a small range of an input. In order to compare the two approaches, grammatical errors are divided into three parts; the first one is grammatical error that can be handled by both approaches, and the second one is errors that can be handled by only a full parser, and the last one is errors that can be done only in a finite state machine. By doing this, we can figure out the strength and the weakness of each approach. The evaluation results show that a full parsing approach can detect more errors than a finite state machine can, while the accuracy of the former is lower than that of the latter. We can conclude that a full parser is suitable for detecting grammatical errors with a long distance dependency, whereas a finite state machine works well on sentences with multiple grammatical errors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.685-688
• /
• 2015

A phase-shift full-bridge converter is widely used conventional converter. If the input power change in the variation of the output voltage, there is a time interval freewheeling according to a duty change. This is a factor of reducing the efficiency. In this paper, we propose a method for improving the efficiency of the converter/inverter systems that require high efficiency in the ESS. The proposed method was used for the duty control for solving the fail problem ZVS(Zero Voltage Switching) in Freewheeling interval. The proposed method was verified by experiments.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.231-244
• /
• 2012

The purpose of this study was to substantially analyze the relation between the success factors of quality management and performance. For this purpose, the success factors of quality management - CEO's leadership, customer-centeredness, process management, training, full participation of employees, and relationship with vendors - were identified as independent variables and performance was identified as dependent variable to substantially analyze the automotive parts industry. In result, the findings can be summarized into the following: First, for the relation between the success factors of quality management and financial performance, CEO's leadership, customer-centeredness, training, and full participation of employees were statistically significant, but process management and relationship with vendors were not statistically significant. Second, for the relation between the success factors of quality management and non-financial performance, CEO's leadership, customer-centeredness, full participation of employees, and relationship with vendors were statistically significant, but process management and training were not statistically significant. Third, it was also found that, among the success factors of quality management, CEO's leadership, customer-centeredness, full participation of employee should be considered more than any other variables to achieve performance. Based on the above findings, it was concluded that 'CEO's leadership' and 'customer-centeredness' had an influence on both financial and non-financial performances and were relatively more influential than other individual factors.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.41-48
• /
• 2020

Currently, the industry uses MODBUS communication method using RS485 as a communication method used when constructing distributed equipment and networks. However, this method has a rather good transmission and reception distance, but has a disadvantage of being a half-duplex communication method. Therefore, there is a great need for a full-duplex communication method that can simultaneously transmit and receive two-wire communications. Therefore, in this paper, we propose a new communication hardware equipment that can implement full-duplex communication method by communication signal level to overcome the disadvantage of communication speed. The proposed communication hardware is a structure that can transmit and receive at the same time on the same communication line in two equipments communicating in a two-wire system. The characteristic of this communication hardware is that the transmitter generates two-level signal for data transmission, but the receiver generates three-level electric signal according to the status of the transmission data generated by the receiver. The data transmission signal information of the receiver is present at the same time. Therefore, the receiving side can analyze the received signal based on the information on the current transmission signal and can analyze the signal only in the two communicating devices, so it can be seen that the communication security is very excellent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.282-287
• /
• 2005

The space time block code(STBC) can not provide simultaneously both full diversity and full transmission rate in a transmit diversity system having more than two transmit antennas.. There are a quasi orthogonal STBC for four transmit antennas that provides full transmission rate and minimized interference. Recently, a simple correlation canceling algorithm is introduced to achieve full diversity from STBC considering four transmit antennas. In this paper, we propose a new decoding procedure using the power allocation at the transmitter and subtraction interference process at the receiver to achieve a better performance without noise enhancement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1984

The time division multiplexing PCM encoder which is constructed for an airborne telemetering system is investigated. Selected by program switch, the PCM encoder has 0~64 words/framd($\pm$5V full scale) of allowable analog input channels, 0~30bits(5V$\pm$1V or 0V$\pm$1V dc) of discrete channels, 70 and 140K bits/sec of bit rate and 8~12bits/word of resolution. And filtered output PCM code is NRZ-L and Bi-S through the 5 pole Bessel LPF(f=100kHz), and the maximum accuracy of PCM encoder is $\pm$0.2% of its full scale.